Abstract:Optical frequency combs of the femtosecond laser have been widely used in time-frequency technology and precision spectrum measurement. The absolute ranging technology derived from time-frequency characteristics of the optical frequency comb is expected to become the incomparable means of length metrology and distance measurement in the future due to its traceability to time-frequency standard and capability of large scale and high precision. This paper proposes a real-time absolute ranging method with multi-wavelength interferometry referenced to optical frequency comb, which enables multiple continuous-wave lasers to be synchronously calibrated to selected modes of the frequency comb by means of optical phase-locked loop. With synchronous phase measurement and calculation with excess fraction algorithm, absolute distance measurement by multi-wavelength interferometry is ultimately fulfilled. The proposed measurement method can not only retain high resolution and high accuracy of traditional laser interferometry, but also can be traced to a time-frequency reference, which is of metrological significance to high-precision length and distance measurement, especially to the definition of "meter" for physical reproduction. Measured results for ranging experiments have proved that the non-ambiguity range of the four-wavelength interferometer reaches 44.6 mm, and fluctuations of air refractive index cause the non-ambiguity range change with the order of nanometers. Through theoretical analysis, it is pointed out that the non-ambiguity range of the multi-wavelength interferometer in the actual measurement environment is restricted by the calculated error of air refractive index, especially the estimation accuracy and fluctuation degree of the refractive index relationship between wavelengths. And in a good laboratory conditions, the non-ambiguity range of real-time absolute ranging by frequency-comb-calibrated multi-wavelength interferometry can reach several meters or even tens of meters. At the same time, a 2-meter linear displacement comparison has been carried out, the P.V. value of the residual errors for linear fitting is 36.1 nm, and such residual errors match the magnitude of uncertainty of air refractive index calculated by empirical formula, which prove that the multi-wavelength interferometry can perform meter-level absolute ranging. The proposed research can be directly applied to precision manufacturing of large-scale semiconductors up to several meters, and is beneficial to promoting the accuracy of laser ranging for space mission.

Synchronous measurement of velocity and distance with high resolution based on comb reference common-path interferometric FMCW lidar

Optical Frequency Shifted FMCW Lidar System for Unambiguous Measurement of Distance and Velocity

Optical Parametric-Assist Frequency Modulation for FMCW Lidar Enabling Double-Range Velocity Measurement

Coherent Heterodyne FMCW Lidar Based on Combined Single/double Sideband Modulation Detection Technology

Aliasing-Free Velocity Measurement of FMCW Lidar System Enabled by Frequency Shifted Optical Beam

Massively parallel FMCW lidar with cm range resolution using an electro-optic frequency comb

Ultrafast and precise distance measurement via real-time chirped pulse interferometry

A Dispersion Compensation Method Based on Resampling of Modulated Signal for FMCW Lidar

Enhanced Velocity Measurement of Lidar by Optical Parametric Assisted Frequency Modulation

Real-time high-precision FMCW laser range extraction method based on a hardware multiplier array

Long-distance ranging with high precision using a soliton microcomb

Laser Feedback Frequency-Modulated Continuous-Wave LiDAR and 3-D Imaging.

FMCW LiDAR with an FM Nonlinear Kernel Function for Dynamic-Distance Measurement.

A High-precision FMCW Lidar Ranging System Based on Dual-path Error Compensation Algorithm

Coherent Dual-Frequency Lidar System Design For Distance And Speed Measurements

Frequency-Modulated Continuous-Wave Laser Interferometry Measurement Method Based on Cross-Correlation

Frequency-Modulated Continuous-Wave LIDAR and 3D Imaging by Using Linear Frequency Modulation Based on Injection Locking

High-precision long-distance measurement with an intensity-modulated frequency comb

A microcomb-empowered Fourier domain mode-locked LiDAR

A new Lidar technology using frequency comb light source

Real-time Absolute Distance Measurement by Multi-Wavelength Interferometry Synchronously Multi-Channel Phase-Locked to Frequency Comb and Analysis for the Potential Non-Ambiguity Range