Abstract:Coherent ranging, also known as frequency-modulated continuous-wave (FMCW) laser-based light detection and ranging (lidar)1 is used for long-range three-dimensional distance and velocimetry in autonomous driving2,3. FMCW lidar maps distance to frequency4,5 using frequency-chirped waveforms and simultaneously measures the Doppler shift of the reflected laser light, similar to sonar or radar6,7 and coherent detection prevents interference from sunlight and other lidar systems. However, coherent ranging has a lower acquisition speed and requires precisely chirped8 and highly coherent5 laser sources, hindering widespread use of the lidar system and impeding parallelization, compared to modern time-of-flight ranging systems that use arrays of individual lasers. Here we demonstrate a massively parallel coherent lidar scheme using an ultra-low-loss photonic chip-based soliton microcomb9. By fast chirping of the pump laser in the soliton existence range10 of a microcomb with amplitudes of up to several gigahertz and a sweep rate of up to ten megahertz, a rapid frequency change occurs in the underlying carrier waveform of the soliton pulse stream, but the pulse-to-pulse repetition rate of the soliton pulse stream is retained. As a result, the chirp from a single narrow-linewidth pump laser is transferred to all spectral comb teeth of the soliton at once, thus enabling parallelism in the FMCW lidar. Using this approach we generate 30 distinct channels, demonstrating both parallel distance and velocity measurements at an equivalent rate of three megapixels per second, with the potential to improve sampling rates beyond 150 megapixels per second and to increase the image refresh rate of the FMCW lidar by up to two orders of magnitude without deterioration of eye safety. This approach, when combined with photonic phase arrays11 based on nanophotonic gratings12, provides a technological basis for compact, massively parallel and ultrahigh-frame-rate coherent lidar systems. A massively parallel coherent light detection and ranging (lidar) scheme using a soliton microcomb—a light source that emits a wide spectrum of sharp lines with equally spaced frequencies—is described.

High Resolution Parallel Coherent Laser Ranging Using an EO Frequency Comb

Massively parallel FMCW lidar with cm range resolution using an electro-optic frequency comb

Massively parallel coherent laser ranging using a soliton microcomb

Massively parallel coherent laser ranging using soliton microcombs

Dispersive Fourier transform based dual-comb ranging

High-resolution and High-rate Dual-comb FMCW Lidar with Coherent Comb Stitching

Dual chirped micro-comb based parallel ranging at megapixel-line rates

Long distance high resolution FMCW laser ranging with phase noise compensation and 2D signal processing

A microcomb-empowered Fourier domain mode-locked LiDAR

Synchronous measurement of velocity and distance with high resolution based on comb reference common-path interferometric FMCW lidar

Comb-based Active Laser Ranging with Frequency Transfer

Video-rate high-precision time-frequency multiplexed 3D coherent ranging

Single-Photon Counting Laser Ranging With Optical Frequency Combs

Hybrid Integrated Ultralow-Linewidth and Fast-Chirped Laser for FMCW LiDAR

Highly‐Linear and Wavelength‐Tunable Frequency‐Modulated Continuous‐Wave Hybrid‐Integrated Laser

Real-time high-precision FMCW laser range extraction method based on a hardware multiplier array

Coherent Heterodyne FMCW Lidar Based on Combined Single/double Sideband Modulation Detection Technology

Laser Feedback Frequency-Modulated Continuous-Wave LiDAR and 3-D Imaging.

Frequency-Modulated Continuous-Wave LIDAR and 3D Imaging by Using Linear Frequency Modulation Based on Injection Locking

Electro-optic Frequency Comb-Enabled Precise Distance Measurement with Megahertz Acquisition Rate