Abstract:Nickel-titanium oxide nanotubes (NiTiONTs), nanoparticles, and nanopores were in situ grown on NiTi fiber substrates by controlling anodization parameters. The adsorption performance of different bimetallic oxide nanostructures was evaluated using typical aromatic compounds including chlorophenols, phthalic acid esters, ultraviolet filters (UVFs), and polycyclic aromatic hydrocarbons (PAHs) coupled to HPLC-UV. The results clearly indicate that these NiTiO nanostructures show good extraction capability for UVFs and PAHs. The extraction performance of UVFs and PAHs greatly depends on the surface morphologies and sizes of the grown NiTiO nanostructures along with their elemental compositions. Compared with NiTiO nanoparticle and nanopore coatings, the longer well-aligned NiTiONT coating exhibits better extraction capability and selectivity for PAHs than for UVFs. Therefore, the extraction parameters of the NiTi@NiTiONT fiber for PAHs were investigated and optimized. Under optimized conditions, the proposed method was linear in the range 0.05–200 μg L<sup>−1</sup> with correlation coefficients above 0.999. Limits of detection were between 0.008 and 0.124 μg L<sup>−1</sup>. Relative standard deviations (RSDs) of the intra-day and the inter-day analyses with the single fiber varied from 4.09 to 6.33%. RSDs for fiber-to-fiber reproducibility of the proposed method with five fibers prepared in different batches were between 5.75 and 7.43%. The applicability of the proposed method was investigated by the enrichment and determination of target PAHs in environmental water samples and relative recoveries of 84.5 ± 6.5 – 116 ± 7.8% were achieved. Notably, the prepared fiber was stable up to 250 times.

Morphology, composition and selectivity of nickel/titanium oxide nanoflakes grown on a superelastic nickel/titanium alloy fiber substrate for highly efficient solid-phase microextraction of aromatic compounds

Modulating the selectivity of solid-phase microextraction fibers based on morphological, compositional, and size-depended control of bimetallic oxide nanostructures grown on nickel-titanium alloy substrates

Controllable in situ growth of novel octahedral TiO 2 nanoparticles on nickel/titanium alloy fiber substrate for selective solid-phase microextraction of ultraviolet filters in water samples

Electrochemical In Situ Fabrication of Titanium Dioxide Nanotubes on a Titanium Wire as a Fiber Coating for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons

Highly Dispersed Nickel Anchored on a N-doped Carbon Molecular Sieve Derived from Metal-Organic Frameworks for Efficient Hydrodeoxygenation in the Aqueous Phase.

Interface catalytic reduction of alumina by nickle for the aluminum nanowire growth: Dynamics observed by in situ TEM

The Growth and Properties of ZnFe2O4/ZnO Nanoparticles Nano-composite Fibers

Self-organizing Evolution of Anodized Oxide Films on Ti-25Nb-3Mo-2Sn-3Zr Alloy and Hydrophilicity

Anodic Fabrication of Ti-Ni-O Nanotube Arrays on Shape Memory Alloy

Morphology Dynamics of Single-Layered Ni(OH)2/NiOOH Nanosheets and Subsequent Fe Incorporation Studied by in Situ Electrochemical Atomic Force Microscopy.

Self-organized NiO architectures: Synthesis and catalytic properties for growth of carbon nanotubes

In Situ Synthesis of Nanostructured Titania Film on Niti Shape Memory Alloy by Fenton'S Oxidation Method

Synthesis and Characterization of Silica-Titanium Oxide Nano-Coating on NiTi Alloy

Development of a novel porous cobalt, phosphorus and nitrogen co-doped carbonaceous coating by phosphiding ZIF-67 grown on nitinol fiber for selective solid-phase microextraction of polycyclic aromatic hydrocarbons from water samples

Evaluation of the Morphology and Osteogenic Potential of Titania-Based Electrospun Nanofibers

Preparation and Electrical Conductivity of Pt/NiO Nanofibers

Nickel Sulfide Modified NiCu Nanoalloy with Excellent Oxygen Evolution Reaction Properties Prepared through Electrospinning and Heat Treatment

Fabrication and Characterization of NiTiO3 Nanofibers by Sol–gel Assisted Electrospinning

Growth of Radial Arranged TiO2 Nanorods by Direct Oxidation of Al-coated In-738 Superalloy

Tailoring Nanocrystalline/Amorphous Interfaces to Enhance Oxygen Evolution Reaction Performance for FeNi‐Based Alloy Fibers

Thermal Facet Healing of Concave Octahedral Pt–Ni Nanoparticles Imaged in Situ at the Atomic Scale: Implications for the Rational Synthesis of Durable High-Performance ORR Electrocatalysts