Abstract:To functionalize the surface of the NiTi alloy, hybrid layers comprising nanometric silica and titanium oxides were synthesized. The TiO2–SiO2 nanosystem was chemically prepared and utilized for electrophoretic deposition (EPD) to create multifunctional layers on the alloy surface. The impact of pH on Zeta potential and ceramic particle size was explored to ensure a stable colloidal suspension for EPD, with optimal parameters established at a pH of approximately 6. A uniform layer was formed by applying a voltage of 40 V for 3 min, appearing as a thin film interspersed with regularly spaced larger agglomerates. The thin film primarily consisted of a minor fraction of defective rutile nanoparticles, accompanied by silica and carbon agglomerates from the nanosystem synthesis process. Heat treatment at 800 °C for 2 h induced significant structural changes, developing a novel-generation material with a different structure. An interlayer with strong Si–O–Ti connections was formed. Moreover, the mechanism of layer formation was extensively discussed.

What problem does this paper attempt to address?

### What problems does this paper attempt to solve? This paper aims to solve the problem of surface modification of nickel - titanium (NiTi) alloys in biomedical applications. Specifically, the authors improve the surface properties of NiTi alloys by synthesizing and characterizing silica - titanium dioxide (SiO₂ - TiO₂) nanocoatings. The following are the main objectives of this study: 1. **Improve biocompatibility and cell adhesion**: - TiO₂ has the ability to promote tissue integration and cell adhesion, which is crucial for successful implant surgeries. By depositing TiO₂ - SiO₂ nanocoatings on the surface of NiTi alloys, bone healing can be accelerated and the growth of new bone tissue can be promoted, thereby enhancing the stability of implants in patients. 2. **Reduce bacterial adhesion and biofilm formation**: - Although TiO₂ does not directly kill bacteria by itself, it can change the properties of the implant surface, reduce bacterial adhesion and biofilm formation, and thus reduce the risk of infection and other complications. 3. **Achieve drug - delivery function**: - SiO₂ and TiO₂ nanoparticles can be used in drug - delivery systems, allowing for the precise release of antibacterial agents, anti - inflammatory drugs, or compounds that promote tissue healing, especially in local treatments, such as releasing drugs in specific areas around the implant. 4. **Solve the problem of nickel - ion release**: - NiTi alloys contain a relatively high nickel content. When present in the body for a long time, nickel ions may be released due to the erosion of body fluids, posing a potential risk to the body. By creating a protective layer on the alloy surface, it can act as a mechanical barrier to prevent the release of nickel ions and extend the service life of the implant in the body. 5. **Optimize the electrophoretic deposition (EPD) process**: - The study explored the influence of pH on Zeta potential and ceramic particle size to ensure a stable colloidal suspension, thereby optimizing electrophoretic deposition parameters. It was finally determined that a uniform coating can be formed by applying a 40 - V voltage for 3 minutes at a pH of approximately 6. 6. **Structural changes after heat treatment**: - Heat treatment (800°C, 2 hours) induced significant structural changes, forming a new generation of materials with strong Si - O - Ti bonds, further improving the stability and functionality of the coating. Through the above methods, this study not only solves the key problems of NiTi alloys in biomedical applications but also develops a new type of multifunctional coating, providing new ideas and technical support for future implant design.

Synthesis and Characterization of Silica-Titanium Oxide Nano-Coating on NiTi Alloy

Mechanism of Ag-SiO2-TiO2 Nanocomposite Coating Formation on NiTi Substrate for Enhanced Functionalization

PREPARATION OF NANO TiO2 ON SURFACE OF SILICA

Functionalization of the NiTi Shape Memory Alloy Surface through Innovative Hydroxyapatite/Ag-TiO2 Hybrid Coatings

Influence of multi-interfacial structure on mechanical and tribological properties of TiSiN/Ag multilayer coatings

Anodic Fabrication of Ti-Ni-Si-O Nanostructures on Ti10Ni5Si Alloy

Effect of Nano-Silica Volume Reinforcement on the Microstructure, Mechanical, Phase Distribution and Electrochemical Behavior of Pre-Alloyed Titanium-Nickel (Ti-Ni) Powder

Surface characteristics and electrochemical corrosion behavior of NiTi alloy coated with IrO2

The Coating Process of Nano-scale Hydrous Silica Film on TiO2 Particles by Chemical Deposition in Aqueous Solution

Comparison of Key Properties of Ag-TiO2 and Hydroxyapatite-Ag-TiO2 Coatings on NiTi SMA

Formation and Physicochemical Properties of Composite Electrochemical Coatings of Tin–Nickel Alloy with Silicon Dioxide Incapsulated by Nanosized Titanium Dioxide

Key Properties of a Bioactive Ag-SiO2/TiO2 Coating on NiTi Shape Memory Alloy as Necessary at the Development of a New Class of Biomedical Materials

Structure and Properties of Bioactive Titanium Dioxide Surface Layers Produced on NiTi Shape Memory Alloy in Low-Temperature Plasma

Ti–Nb–Si-based surface alloy fabricated on TiNi SMA substrate through additive electron beam method: structure and perspectives

Surface Characterization and Mechanical Property of Tin/Ti-Coated Niti Alloy by Piiid

Fabrication of Titania Film on Niti Alloy by A Deposition-Assisted Advanced Oxidation Method

A Novel Titania/calcium Silicate Hydrate Hierarchical Coating on Titanium.

Deposition of Polymers on Titanium Nitride Electrodes

Preparation and Characterization of TiO2/silicate Hierarchical Coating on Titanium Surface for Biomedical Applications.

Development of Microstructure and Properties of Multicomponent MoS2/HA/PEEK Coatings on a Titanium Alloy Via Electrophoretic Deposition and Heat Treatment