Abstract:Research highlights•High-entropy transition metal carbides with regulatable carbon stoichiometry (HE TMCx) achieve the promoting of formation ability from carbon stoichiometry deviations.•Bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) with carbon stoichiometry deviations show promoted sintering.•Bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) present tunable mechanical properties.Tremendous efforts have been dedicated to promote the formation ability of high-entropy transition metal carbides. However, the majority of methods for the synthesis of high-entropy transition metal carbides still face the challenges of high temperature, low efficiency, additional longtime post-treatment and uncontrollable properties. To cope with these challenges, high-entropy transition metal carbides with regulatable carbon stoichiometry (HE TMCx) were designed and synthesized, achieving improved ability for single phase solid solutions formation, promoting of sintering and controllable mechanical properties. Two typical composition series, i.e., easily synthesized (Zr0.25Hf0.25Ta0.25Nb0.25)C (ZHTNC) and difficultly synthesized (Zr0.25Hf0.25Ta0.25Ti0.25)C (ZHTTC) are selected to demonstrate the promoting formation ability of single phase solid solutions from carbon stoichiometry deviations. Single phase high-entropy ZHTTC, which has been proven difficult in forming a single phase solid solution, can be prepared with the decrease of C/TM ratio under 2000°C; while the high-entropy ZHTNC, which has been proven easy in forming a single phase solid solution, can be synthesized at lower temperatures with the decrease of C/TM ratio. The synergistic effect of entropy stabilization and reduced chemical bond strength gaining from carbon stoichiometry deviations is responsible for the formation of single phase solid solutions and the promoted sintering of HE TMCx. For example, the relative density of bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) increases from 90.98% to 94.25% with decreasing the C/TM atomic ratio from 0.9 to 0.74. More importantly, the room temperature flexural strength, fracture toughness and brittleness index of SPS-ZHTNCx can be tuned in the range of 384 MPa–419 MPa, 4.41 MPa m1/2–4.73 MPa m1/2 and 3.679 μm−1/2–4.083 μm−1/2, respectively. Thus, the HE TMCx prepared by adjusting the ratio of carbon to refractory transition metal oxides have great potential for achieving low temperature synthesis, promoted sintering and tunable properties.

Low‐temperature synthesis and oxidation resistance of random combination of Hf, Nb, and Ta carbides microcuboids

Tuning structure, mechanical properties, and oxidation resistance of (Nb, Ta)C1- solid solution powders via the dissolution-precipitation process

Facile Electrochemical Preparation of Nano-sized Ultra-high-temperature Ta1-xHfxC Ceramic Powders

Tunable mechanical properties and excellent microwave transparent performance of full spectrum (Ti Ta1-)C microcuboids (0 < x < 1) synthesized via a dissolution-precipitation strategy

A Facile Route for the Synthesis of High‐entropy Transition Carbides/borides at Low Temperatures

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Oxidation of a 2wt.%Hf–doped (Ta,C)-rich nickel–based alloy between 1100 and 1250°C

Oxidation behavior of (NbTaZrW)C high-entropy carbide at 800–1000 °C

High‐temperature Oxidation Behavior of (hf0.2zr0.2ta0.2nb0.2ti0.2)c High‐entropy Ceramics in Air

The role of multi-elements and interlayer on the oxidation behaviour of (Hf-Ta-Zr-Nb)C high entropy ceramics

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Regulating the formation ability and mechanical properties of high-entropy transition metal carbides by carbon stoichiometry

Microstructure and oxidation behavior of Nb-based multi-phase alloys

Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)Cx carbide solid solution powders in air

A first-principles study of the stability and mechanical properties of ternary transition metal carbide alloys

Host Lattice and Solid Solution Formation in an Octal-Cation (NbTaZrTiHfVWMo)C High Entropy Carbide Ceramic

High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys

Performance of Carbide Alloy Compounds in Carbon Doped MoNbTaW

Single-source-precursor synthesis of dense monolithic SiC/(Ti0.25Zr0.25Hf0.25Ta0.25)C ceramic nanocomposite with excellent high-temperature oxidation resistance

Reaction with hot air of high entropy alloys strengthened by monocarbides formed from heavy metals: assessment of the oxidation kinetics from the analysis of the chemically changed subsurfaces

Solid‐Solution Effects on the High‐Temperature Oxidation Behavior of Polymer‐Derived (Hf,Ta)C/SiC and (Hf,Ti)C/SiC Ceramic Nanocomposites