Abstract:Laser-directed energy deposition (L-DED) has emerged as a promising technique for prototyping and the rapid manufacturing of Ti-6Al-4V alloy components. However, the hierarchical and heterogeneous microstructure that forms during L-DED can potentially lead to localized mechanical property variations. As a result, the widespread application of L-DED Ti-6Al-4V depends on a thorough understanding of its local property heterogeneity. This study examines the mechanical properties of L-DED-fabricated Ti-6Al-4V alloy, with a particular focus on hardness and localized tensile properties within the build volume, to identify potential variations. The mechanical property heterogeneity of the alloy was assessed both in the as-deposited condition and after mill-annealing (MA) treatment. Interestingly, the hardness distribution in L-DED Ti-6Al-4V, whether in the as-deposited or MA condition, did not exhibit significant local variability. Local tensile strength variation was found to be influenced by the orientation of the columnar β grains. When these grains were oriented perpendicular to the tensile deformation direction, minimal heterogeneity in tensile strength was observed. In contrast, greater variation was perceived when the columnar β grains were aligned parallel (along the deposition direction) to the tensile deformation direction. Furthermore, the strain-to-failure was higher along the deposition direction than in the perpendicular orientation. Notably, the strain-to-failure of the L-DED Ti-6Al-4V alloy decreased following MA treatment, regardless of the grain orientations. No clear trend in strain-to-failure variation with sample location was observed in L-DED Ti-6Al-4V alloy, either in the as-deposited or MA conditions. The observed local heterogeneity in mechanical properties is discussed and explained based on microstructural features and their influence on deformation behavior in the L-DED Ti-6Al-4V alloy.

Evaluation of the Mechanical property heterogeneity in laser-directed energy deposited Ti-6Al-4V alloy

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Evolution of microstructure and mechanical property of Ti-47Al-2Cr-2Nb intermetallic alloy by laser direct energy deposition: From a single-track, thin-wall to bulk

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening

Hierarchical Anisotropic Material Response of Directed Energy Deposited (DED) Ti-6Al-4V alloy

Analysis of laser power/scan speed combinations on constant energy density: Correlation of roughness-density and structure-property of additively manufactured Ti-6Al-4 V alloy

Effects of Conventional Interweaving and Secondary Deposition on the Microstructure and Properties of Ti6Al4V/AA2024 Alloy Component Fabricated by Laser-Directed Energy Deposition

Microstructure and mechanical properties of a newly developed Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V alloy fabricated by laser directed energy deposition

Process-induced Mechanical Property Heterogeneity along the Building Direction of Directed Energy Deposited IN718 Thin-walled Parts

Mechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

Composition fine-tuning for directed energy deposition of Ti-6Al-4V

Influence of Effective Laser Energy on the Structure and Mechanical Properties of Laser Melting Deposited Ti6Al4V Alloy

Microstructure and Mechanical Behavior of Additively Manufactured CoCrFeMnNi High-Entropy Alloys: Laser Directed Energy Deposition versus Powder Bed Fusion*

Multiscale microstructural heterogeneity and mechanical property scatter in Inconel 718 produced by directed energy deposition

Impact of Conventional and Laser-Assisted Machining on the Microstructure and Mechanical Properties of Ti-Nb-Cr-V-Ni High-Entropy Alloy Fabricated with Directed Energy Deposition

Microstructure and fracture behavior of 90W-7Ni-3Fe alloy fabricated by laser directed energy deposition

Spatially heterogeneous microstructure in in-situ TiO-reinforced Ti6Al4V/316L functionally graded material fabricated via directed energy deposition

Mechanical Behavior Assessment of Ti-6Al-4V ELI Alloy Produced by Laser Powder Bed Fusion