Abstract:Nano-SiO2 is a brilliant candidate that endows cement-based materials excellent properties. However, its agglomeration in cement matrix is still an urgent problem. In order to address this issue, well-dispersed calcined stöber nano-SiO2 (CSNS) was prepared as modifier for Portland cement in this work. Monodisperse stöber nano-SiO2 (SNS) was firstly synthesized by using the traditional stöber method and then it was calcined to form CSNS. A series of properties including morphology and structure information of SNS and CSNS were obtained by using scanning electron microscope (SEM), particle size analyzer, X-ray diffraction (XRD), and fourier transform infrared spectroscopy (FT-IR). Their potential pozzolanic activity was also evaluated by using a simulated pore solution method and the possible reaction products were analyzed by using SEM and thermogravimetric (TG) analysis. Finally, their effects on early hydration properties of Portland cement were preliminarily investigated by using isothermal calorimetry, XRD, TG and compressive strength tests. The experimental results showed that both SNS and CSNS with high dispersity and uniform size within 100 nm were successfully prepared. However, both of them present low pozzolanic activity within 3 days. When 2 wt% SNS was added to cement, the occurrence of acceleration period was slightly delayed and the corresponding maximum heat flow was significantly reduced. Its addition also decreased both hydration degree of the cement paste and the compressive strength of the mortar at 1 day and 3 days. On the contrary, CSNS effectively overcame these negative effects of SNS on cement hydration, and further accelerated cement hydration. Compared with the Portland cement, the addition of 2 wt% CSNS significantly increased the cumulative heat released with 72 h, and cement hydration degree and compressive strength at each curing age. This is because the hydroxyl (-OH) group was removed after calcination of SNS, which made the well-dispersed CSNS better accelerate cement hydration by effective nucleation sites and filler effects. The findings of this work can provide a guidance for the application of well-dispersed nano-materials prepared based on stöber method to effectively modify the performance of cement-based materials.

Experimental Study of the Moisture Resistance of Cement Mortar Using Pozzolan Materials and Calcium Stearate

Influence of water-repellent admixtures ( Sitren and Stearate materials) on the microstructure and mechanical performance of conventional Portland cement paste and mortar

Nanoindentation Characteristics of Cement Paste and Interfacial Transition Zone in Mortar with Rice Husk Ash

Experimental study on waterproof performance and freeze-thaw resistance of cement mortar using stearic acid modified mica powder

Effect of nano materials on cementitious mortar composites exposed to sulphate attack

Experimental Study on Properties of Cement Mortar with Micro-Nano Bubble Water

Effect of nano-SiO2/CaSO4 whisker–silica fume on the strength, drying shrinkage, and capillary water absorption of cement mortar

Effect of Nano-SiO2 on the Mechanical Properties, Microstructure, and Hydration Process of Cementitious Materials Incorporating Hydrophobic Admixture

Influence of Nanoparticles on Fluidity and Mechanical Properties of Cement Mortar

Study on the Influence of Nanosilica Sol on the Hydration Process of Different Kinds of Cement and Mortar Properties

Early hydration properties of Portland cement with lab-synthetic calcined stöber nano-SiO2 particles as modifier

Permeabilities and Mechanical Properties of Hardened Cement Pastes Modified with Sodium Laurate and Nano Silica

Synthesis, Application and Effect of Hybrid Nanocomposites Based on Hydrogel and Nanoclay in Cement-Mortars

Chloride ion penetration resistance and microstructural modification of concrete with the addition of calcium stearate

Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

Study on Corrosion Resistance of Hydrophobic Early Strength Mortar Containing Calcium Formate

Diatomaceous Earth-Lightweight Pozzolanic Admixtures for Repair Mortars-Complex Chemical and Physical Assessment

INVESTIGATING THE EFFECT OF NANO SILICA ON THE MECHANICAL PROPERTIES OF HARDENED CEMENT PASTE

Relationship Between Microscopic Pore Structure and Strength of Cement-Based Materials with Low Water-Binder Ratio Under Sulfate Attack Environment

Effect and mechanism of colloidal silica sol on properties and microstructure of the hardened cement-based materials as compared to nano-silica powder with agglomerates in micron-scale