Abstract:Modern concrete construction consumes significant amounts of freshwater, which is a valuable natural resource. Using seawater can be an alternative solution to reduce freshwater consumption for sustainable development. The durability of seawater construction materials should be studied for better understanding of their long-term behavior. This study investigated the effect of seawater on the hydration and the sulfate resistance of noncement mortars prepared by mixing ground granulated blast furnace slag (BFS), carbide slag (CS), and silica fume (SF) to understand the feasibility of using seawater and solid waste materials to develop low-carbon construction materials. CS in the mix acted as an alkali activator for the hydration and strength development of the solid wastes. Two batch specimens were prepared, one batch mixed with seawater and the other mixed with freshwater for comparison. A compressive test investigated the effect of seawater on the mechanical properties. Heat flow, X-ray diffractometry (XRD), and thermogravimetry tests were used to understand the hydration. The results suggest that the seawater could accelerate the hydration by producing a large amount of hydrocalumite, which improves the compressive strength at early ages. Durability testing was carried out by immersing specimens in a sulfate solution for various durations. Sulfate resistance was characterized by XRD, and ettringite and Friedel's salt were the main corrosion products when the specimens were immersed in sulfate solution. Corrosion could be reduced by seawater in the specimens. Scanning electron microscopy was used to characterize the microstructure of the hydration products, which showed that the corrosion was a progressive process. A loose and porous microstructure of the specimen surface accelerated corrosion of the noncement specimens.

Study on Corrosion Resistance of Hydrophobic Early Strength Mortar Containing Calcium Formate

Chloride erosion resistance of calcium formate incorporated cement mortar under chloride attack

Study on the Corrosion Resistance of Hydrophobic Cement Mortar

Study on the anti-corrosion properties of hydrophobic cement mortar containing coral sand

Study on the corrosion resistance of composite modified anti-corrosion mortar under the action of bio-organic water

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Fabricating hydrophobic silica fume to improve mechanical strength and anti-corrosion of integral hydrophobic cement mortar

Chloride ion penetration resistance and microstructural modification of concrete with the addition of calcium stearate

Influence of water-repellent admixtures ( Sitren and Stearate materials) on the microstructure and mechanical performance of conventional Portland cement paste and mortar

Experimental study on waterproof performance and freeze-thaw resistance of cement mortar using stearic acid modified mica powder

Study on corrosion mechanism of concrete and development of new protect mortar in the metallurgy condition

Effect of Seawater on Hydration and Sulfate Resistance of Noncement Mortars

Meso-scale Mechanical Deterioration of Mortar Due to Sodium Chloride Attack

Steel Corrosion Behavior of Reinforced Calcium Aluminate Cement-Mineral Additions Modified Mortar

A ultra‐low viscosity stearic acid emulsion prepared by lauric acid as waterproof agent for cement mortar

Study on Bonding Performance of Magnesium Phosphate Cement Mortar in Chloride Corrosion Environment

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Degradation characteristics of Portland cement mortar incorporating supplementary cementitious materials under multi-ions attacks and drying-wetting cycles

Experimental Study on Foci Development in Mortar Using Seawater and Sand.

Improved chloride binding capacity and corrosion protection of cement-based materials by incorporating alumina nano particles