Abstract:There are abundant sea-sand resources on the earth. Traditional sea-sand concrete faced various problems relating to insufficient anticorrosion ability. In this paper, artificial seawater, sea sand, industrial waste, steel fiber, and polycarboxylate superplasticizer were used to prepare ultra-high-performance polymer cement mortar (SSUHPC). At the same time, freshwater river-sand ultra-high-performance polymer cement mortar (FRUHPC) with the same mixing ratio was prepared for comparative study. The compressive strength of SSUHPC reached 162.1 MPa, while the that of FRUHPC reached 173.3 MPa, which was slightly higher. Meanwhile, SSUHPC showed excellent anticorrosion characteristics in terms of carbonization, frost resistance and chloride resistance, and especially for sulfate resistance. The composition of SSUHPC was separated into three parts: mortar, pore and steel fiber, and the performance difference mechanisms of SSUHPC and FRUHPC were investigated by X-ray computed tomography (X-CT), mercury intrusion porosimetry (MIP), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The hydration degree of mortar in SSUHPC was higher, with higher content of CSH and CH, and its better optimized gel pore characteristics gave SSUHPC better corrosion resistance. The mechanical properties of SSUHPC were slightly poor due to the uneven dispersion of steel fibers and air pores, with an- air pore porosity of 1.52% (above 200 μm) that was twice that of FRUHPC (0.6%). In this paper, the mechanics and anticorrosion performance of ultra-high-performance polymer cement mortar prepared with seawater sea sand were comprehensively evaluated, and the mechanism of performance difference between SSUHPC and FRUHPC was revealed, conducive to the targeted improvement of sea sand concrete.

Study on the Corrosion Resistance of Hydrophobic Cement Mortar

Study on the anti-corrosion properties of hydrophobic cement mortar containing coral sand

Study on Corrosion Resistance of Hydrophobic Early Strength Mortar Containing Calcium Formate

Fabricating hydrophobic silica fume to improve mechanical strength and anti-corrosion of integral hydrophobic cement mortar

Study of Self-Cleaning and Anticorrosion Superhydrophobic Coating on Cement Mortar Using Milled Coral Waste Powder

Study on the corrosion resistance of composite modified anti-corrosion mortar under the action of bio-organic water

Green Fabrication of Superhydrophobic Zeolite Coating on Cement-Based Material Surfaces to Improve Water-Resistant and Anticorrosion Properties

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

The Mechanism of Anticorrosion Performance and Mechanical Property Differences between Seawater Sea-Sand and Freshwater River-Sand Ultra-High-Performance Polymer Cement Mortar (UHPC)

Exploration into Anticorrosive Property of Antirust Compound-Admixture

Facile preparation of monolithic superhydrophobic concrete with excellent anti-corrosion property

Study on corrosion mechanism of concrete and development of new protect mortar in the metallurgy condition

Study on PVA-siloxane mixed emulsion coatings for hydrophobic cement mortar

Study of Salt Resistance and Mechanical Strength of Robust and Non-Fluorinated Superhydrophobic Cement

An Experimental Investigation on the Impermeability and Durability of Concrete with a Novel and Multifunctional Hydrophobic Admixture Addition

Permeabilities and Mechanical Properties of Hardened Cement Pastes Modified with Sodium Laurate and Nano Silica

Design of monolithic superhydrophobic concrete with excellent anti-corrosion and self-cleaning properties

Research on the Performance of Superhydrophobic Cement-Based Materials Based on Composite Hydrophobic Agents

Green fabrication of mechanically stable superhydrophobic concrete with anti-corrosion property

Preparation of a Stable Superhydrophobic Mortar Surface Using a One-Step Method

Influence of water-repellent admixtures ( Sitren and Stearate materials) on the microstructure and mechanical performance of conventional Portland cement paste and mortar