Abstract:The formation of carbon nanofibers (CNF) and carbon nanotubes (CNT) can be attributed to the ability of NiO to decompose hydrocarbons, mainly methane (CH4). This process includes the activation and the CH4 decomposition in the crystallographic Ni (100) and Ni (110) planes, and the CNF germination in the Ni (111) plane [1]. According to experimental studies, the addition of Nb2O5 in these catalysts can increase the intensity of the active planes, favoring the CH4 decomposition [2]. In this context, the goal of this work is to investigate, through theoretical calculations, the properties of the material after doping with Nb. All calculations were performed using the ADFBAND package, with application of the DFT method at the GGA-PBE level and TZP basis set. The structures of the pure and niobium doped NiO catalysts were indexed in the (100), (110) and (111) planes. The addition of Nb conferred greater stability to the compound in all analyzed planes. This variation was of 186.15, 186.20 and 167.70 kcal/mol to lower energy values, in the (100), (110) and (111) planes, respectively. For the adsorption study, the methane molecule was optimized in contact with the (111) plane of the NiO and NiO/Nb catalysts at different distances. The methane adsorption begins to take place on the surfaces at a distance of approximately 4 Ǻ and reaches the minimum energy at 3 Ǻ. However, on the Nb doped catalyst, the equilibrium geometry occurs at an adsorption energy of 9.92 kcal/mol larger than on pure NiO. As for the proposed mechanism, the study suggests that the carbon deposition on the catalyst starts with adsorption, followed by a series of steps of methane dissociation on the metal surface, leading to the formation of several adsorbed species and, finally, carbon and hydrogen. From now on, it takes place the growth of the crystalline carbon. The potential energy surface of the dissociation catalyzed by NiO, in black, and by NiO/Nb, in red, is then obtained. 12 a 17/Nov, 2017, Águas de Lindóia/SP, Brasil It is found that the CH4 dissociation into carbon and hydrogen by the modified surface is favored thermodynamically with respect to the pure catalyst at all stages. This behavior may be related to the existence of a synergistic effect between Ni and Nb, which results in improved catalytic performance of the modified structure throughout the dissociation. Thus, the theoretical results indicate that the modification of the NiO structure caused by the presence of Nb can bring about improvements in the activity of this material in methane decomposition reactions and subsequent formation of CNF and CNT. Key-words: DFT, Nickel oxide, Methane decomposition, CNF, CNT. Support: This work has been supported by FAPEMIG and FAPESP. References: [1] K. P. De Jong; J. W. Geus Catal. Rev.-Sci Eng. 2000, 42, 481 [2] Li, J. Z.; Lu, G. X.; Li, K. Chemistry Latters 2004, 33, 652.

Effect of niobium addition over Ni/MCM-41 catalysts for dry reforming of biogas

Nickel‐Catalyzed Dry Reforming of Methane Via Modulating the Zirconia Shapes

Ni/x%Nb2O5/Al2O3 Catalysts Prepared via Coprecipitation-Wet Impregnation Method for Methane Steam Reforming

Inspection over Carbon Deposition Features of Various Nickel Catalysts During Simulated Biogas Dry Reforming

Ni supported on desilicated HZSM-5 as catalyst for biogas reforming

Promoted Nickel–Cobalt Bimetallic Catalysts for Biogas Reforming

Performance Study of Ni/Si-MCM-41 Catalysts, Synthesized with Different Silica Sources, and their Application on Methane Dry Reform to Produce Green Hydrogen

A nanoscale Ni/ ZrO 2 catalyst coated with Al 2 O 3 for carbon dioxide reforming of methane

Syngas production employing nickel on alumina‐magnesia supported catalyst via dry methane reforming

Overcoming the kinetic and deactivation limitations of Ni catalyst by alloying it with Zn for the dry reforming of methane

Carbon Deposition on Borated Alumina Supported Nano-Sized Ni Catalysts for Dry Reforming of CH4

Study on CO2 reforming of methane to syngas over Al 2O3-ZrO2 supported Ni catalysts prepared via a direct sol-gel process

Niobium Modification of CeO2 Tuning Electron Density of Nickel-Ceria Interfacial Sites for Enhanced CO2 Methanation

Effect of Modified Nanoclay Surface Supported Nickel Catalyst on Carbon Dioxide Reforming of Methane

Syngas production from methane dry reforming over Ni/Al2O3 catalyst

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Impacts of Niobia Loading on Active Sites and Surface Acidity in NbO /ceo2–zro2 NH3–SCR Catalysts

Theoretical study of the methane decomposition catalyzed by niobium doped nickel oxide : thermodynamic profile and reaction mechanism

Biogas Reforming on Hydrotalcite-Derived Ni-Mg-Al Catalysts: the Effect of Ni Loading and Ce Promotion

Enhancing the dry reforming of methane over Ni-Co-Y/WC-AC catalyst: Influence of the different Ni/Co ratio on the catalytic performance

Promotional Effect of Ni−Sn Interaction over Ni Supported on Sn‐incorporated MCM‐41 Catalysts for CO 2 Reforming of CH 4