Abstract:Nickel-rich layered oxide cathode materials having a Ni content of ≥90% have great potential for use in next-generation lithium-ion batteries (LIBs) due to their high energy densities and relatively low cost. They suffer, however, from poor cycling performance and rate capability, significantly hampering their widespread applicability. In this study, we synthesized a Ni-rich precursor through a co-precipitation method and added different amounts of the Li excess on the precursors using a solid-state method to obtain sintered Li1+x (Ni0.9Co0.05Mn0.05)1–x O2 (denoted as L1+x -NCM; x = 0.00, 0.02, 0.04, 0.06, and 0.08) transition metal (TM) oxide cathode materials. The L1+x -NCM cathode having a Li excess of 4% exhibited a discharge capacity of ca. 216.17 mA h g–1 at 2.7–4.3 V, 0.1 C and retained 95.7% of its initial discharge capacity (ca. 181.39 mA h g–1) after 100 cycles of 1 C charge/discharge which is the best performance as compared with stoichiometric Li1+x (Ni0.9Co0.05Mn0.05)1–x O2 (i.e., x = 0, Li/TM = 1:1). Furthermore, a high-rate capability of ca. 162.92 mA h g–1 at a rate of 10 C led to the 4% Li excess, optimizing the electrochemical performance, relative to the other Li-excess samples. Ex/in situ X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy revealed that the 4% Li excess in the Ni-rich NCM90 cathode material (i) decreased the Li+/Ni2+ disorder by increasing the content of Ni3+ in the TM slab, (ii) increased the crystallinity, and (iii) accelerated Li+-ion transport by widening the Li slab. Furthermore, electrochemical impedance spectroscopy and cyclic voltammetry confirmed that the appropriate Li excess lowered the electrochemical impedance and improved the reversibility of the electrochemical reaction. Therefore, our results revealed that NCM90 cathode materials featuring an optimal Li excess are potential candidates for use in next-generation LIBs.

Effect of Copper-Doping on LiNiO 2 Positive Electrode for Lithium-Ion Batteries

Effect of Cu substitution on structures and electrochemical properties of Li[NiCo1-xCuxMn]1/3O2 as cathode materials for lithium ion batteries

Tuning the electronic properties of NiO anode by in-situ introducing metallic Cu for high capacity and long life-span lithium-ion batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

One-pot K+ and PO43− Co-Doping Enhances Electrochemical Performance of Li-rich Li1.2Ni0.13Co0.13Mn0.54O2 Cathode for Li-ion Battery

Copper Nitrate Enables High-performance Lithium-ion Batteries at Low Temperature

Effect of Li Excess on Electrochemical Performance of Ni-Rich LiNi 0.9 Co 0.05 Mn 0.05 O 2 Cathode Materials for Li-Ion Batteries

High-efficiency Mo Doping Stabilized LiNi0.9Co0.1O2 Cathode Materials for Rapid Charging and Long-Life Li-ion Batteries

Complementary Effects of Mg and Cu Incorporation in Stabilizing the Cobalt-Free LiNiO2 Cathode for Lithium-Ion Batteries

Trace Doping of Multiple Elements Enables Stable Cycling of High Areal Capacity LiNi0.5Mn1.5O4 Cathode

Role of impurity copper in Li-ion battery recycling to LiCoO2 cathode materials

Insight into the Effect of Cu 2+ Doping on Cu x Nb 2– x O 5–3/2 x for High-Power Lithium-Ion Batteries

Heterogeneous doping-induced surface reconstruction toward high-performance LiNiO2 cathode materials for lithium-ion batteries

Lanthanum doping and surface Li 3 BO 3 passivating layer enabling 4.8 V nickel-rich layered oxide cathodes toward high energy lithium-ion batteries

Na Doping and CeO2 Nanoparticle Surface Modification Enhancing the Li-Rich Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material for a Lithium-Ion Battery

Effect of Nb doping at Fe site on the cycling stability and rate capability of LiFePO4 for lithium-ion batteries

The effect of dual-doping on the electrochemical performance of LiNi0.5Mn1.5O4 and its application in full‐cell lithium‐ion batteries

Effect of Nb doping at Fe site on the cycling stability and rate capability of LiFePO<sub>4</sub> for lithium-ion batteries

Preparation of low cobalt-doped LiNiO2 materials by the spray pyrolysis method

Progress and Perspective of Doping Strategies for Lithium Cobalt Oxide Materials in Lithium-Ion Batteries