Abstract:This study presents a one-dimensional, non-isothermal, steady-state model to analyze performance of an anode-supported solid oxide fuel cell (SOFC). The modeling domain encompasses components including a NiO-YSZ support and functional layer forming the anode, a YSZ electrolyte, a GDC interlayer, as well as LSCF+GDC and LSCF constituting the cathode. The model distinguishes different types of electrode polarization resistances using experimental impedance data at various temperatures under open circuit voltage (OCV), employing a detailed equivalent circuit model to determine the temperature and partial pressure dependencies of electrode exchange current densities. Moreover, this approach serves as an efficient method for estimating the conductivity of both the anode and cathode. As a result, activation energies and ohmic overpotentials are derived, considering microstructural and geometrical aspects, which allows for accurate quantification of the ohmic resistance associated with ionic conduction. The model incorporates coupled multi-physics elements, such as mass and charge transport, electrochemical reactions, and heat transfer. A notable feature of the model is its consideration of reaction zone layers near the electrolyte, where electrochemical reactions generate electrons, oxide ions, and water vapor. Enhancing prediction accuracy, the model applies multilayer discretization within the electrode and electrolyte to reflect actual material properties and localized conditions more accurately. The model predicts the performance of a single-cell SOFC using pure hydrogen at the anode and varying oxygen concentrations (100%, 50%, 20%, and 10%) at different operating temperatures (700°C, 660°C, 620°C, and 580°C) and design conditions. Simulated results are compared with experimental data, and the impact of various operating and design parameters on SOFC performance is examined. Findings indicate that kinetic and concentration overpotentials in an anode-supported SOFC are lower than ohmic overpotentials, even at higher current densities. Furthermore, ohmic overpotential is identified as the primary contributor to total cell potential loss, highlighting the need for its minimization to improve cell performance.

Wall-function method used to simplify the solid oxide fuel cell model

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Optimization of interconnect flow channels width in a planar solid oxide fuel cell

A Reduced-Order Electrochemical Model for Analyzing Temperature Distributions in a Tubular Solid Oxide Fuel Cell Stack

Mathematical modeling of solid oxide fuel cells at high fuel utilization based on diffusion equivalent circuit model

Evaluating the effectiveness of the modified multi-scale multi-physics coupled model for solid oxide fuel cells: A comparative analysis

Modeling of SOFC System Reduction and Simulation Testing

Numerical Simulation of Multi-Channel Planar Solid Oxide Fuel Cell Unit by Integrating Continuum Micro-Scale Pen Sub-Model

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Numerical simulation acceleration of flat-chip solid oxide cell stacks by data-driven surrogate cell submodels

Three-dimensional Numerical Simulation of Solid Oxide Tuel Cell

Simulation and Analysis of Thermal Stress and Sintering Warpage of Planar Solid Oxide Fuel Cells

Mathematical modelling of Solid Oxide Fuel Cells revisited -- a modified formulation of the problem

Numerical Analysis of Thermal Stress for a Stack of Planar Solid Oxide Fuel Cells

An Analytical Model of View Factors for Radiation Heat Transfer in Planar and Tubular Solid Oxide Fuel Cells

Numerical Investigation of Heat/Flow Transfer and Thermal Stress in an Anode-Supported Planar SOFC

Multiphysics Simulation of a Solid Oxide Fuel Cell Based on COMSOL Method

Effect of the Reactant Transportation on Performance of a Planar Solid Oxide Fuel Cell

Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode