Abstract:Copper/steel is a typical bimetal functional material, combining the excellent electrical and thermal conductivity of copper alloy and the high strength and hardness of stainless steel. There has been recent interest in manufacturing copper/steel bimetal by directed energy deposition (DED) due to its layer-by-layer method. However, cracks tend to form on the copper/steel interface because of the great difference in thermal expansion coefficient and crystal structure between copper and steel. In this work, interfacial characteristics and mechanical properties of the copper/steel bimetal were studied from one layer to multilayers. The laser power has a great influence on the Cu element distribution of the molten pool, affecting the crack formation dramatically on the solidification stage. Cracks tend to form along columnar grain boundaries because of the Cu-rich liquid films and spherical particles in the cracks. Crack-free and good metallurgical bonding copper/steel interface is formed at a scanning velocity of 800 mm/min and the laser power of 3000 W. The ultimate tensile strength (UTS) and the break elongation (EL) of the vertically combined crack-free copper/steel bimetal are 238.2 ± 4.4 MPa and 20.6 ± 0.7%, respectively. The fracture occurs on the copper side instead of the copper/steel interface, indicating that the bonding strength is higher than that of the Cu-Cr alloy. The UTS of the horizontally combined crack-free copper/steel bimetal is 746.7 ± 22.6 MPa, which is 200% higher than that of the Cu-Cr alloy substrate. The microhardness is 398.6 ± 5.4 HV at the steel side and is 235.3 ± 64.1 HV at the interface, which is 400% higher than that of the Cu-Cr alloy substrate. This paper advances the understanding of the interfacial characteristics of heterogeneous materials and provides guidance and reference for the fabrication of multi-material components by DED.

Effect of deposition sequence on interfacial characteristics of Inconel–copper functional bimetallic structures fabricated by directed energy deposition-arc

Heterogeneous interfaces of aluminum bronze/Inconel 718 dissimilar alloys under different wire arc directed energy deposition sequences

In situ interlayer hot forging arc-based directed energy deposition of Inconel® 625: process development and microstructure effects

Inconel 718-W7Ni3Fe bimetallic structures using directed energy deposition-based additive manufacturing

Bimetallic Structure of Ti6Al4V/IN718 with CuSi Interlayer for Wire-Arc Directed Energy Deposition Process

Interfacial characteristics and mechanical properties of additive manufacturing martensite stainless steel on the Cu-Cr alloy substrate by directed energy deposition

Microstructure and Mechanical Properties of Bimetallic Materials Containing Ceramic Particles Made Using Directed Energy Deposition

Interfacial characteristics and mechanical properties of 316L and S214 bimetals fabricated by wire‐arc additive manufacturing

Investigating stainless steel/aluminum bimetallic structures fabricated by cold metal transfer (CMT)-based wire-arc directed energy deposition

Effect of Welding Torch Mode on Heat Input, Microstructure, and Mechanical Performance of Inconel 625 via Wire‐Arc‐Directed Energy Deposition

The Effect of the Cu Interlayer on the Interfacial Microstructure and Mechanical Properties of Al/Fe Bimetal by Compound Casting

Study of pre-precipitated 8 phase promoting deformation twinning and recrystallization behavior of Inconel 718 superalloy during hot compression

Multiscale microstructural heterogeneity and mechanical property scatter in Inconel 718 produced by directed energy deposition

Interface characteristics and mechanical properties of wire-arc depositing Inconel 625 superalloy on ductile cast iron

Effect of in-situ synthesized TiC particles on microstructure and mechanical properties of directed energy deposited AA2219 Al-Cu alloy

Dual-interfacial alloying mechanism in Ti-steel laminated metal composite fabricated by wire-arc directed energy deposition using a Cu-Ni interlayer

Effect of ultra-fine grain zone on mechanical properties of CuCrZr-Hastelloy X bimetallic structure manufactured by laser-directed energy deposition

Quantitative simulations of grain nucleation and growth at additively manufactured bimetallic interfaces of SS316L and IN625

Effect of interface-layer process parameters on forming quality of 316L/CuSn10 bimetals fabricated via laser powder bed fusion

Effect of deposit thickness on microstructure and mechanical properties at ambient and elevated temperatures for Inconel 718 superalloy fabricated by directed energy deposition

Microstructural evolution and anisotropic mechanical properties of Inconel 625 superalloy fabricated by directed energy deposition