Abstract:Electrochemical descaling technology (EDT) can significantly increase the concentration ratio of industrial circulating cooling water systems (CCWSs), thereby reducing water, capital, and energy consumption. However, our understanding of the impact of EDT on carbon steel corrosion in CCWSs is limited, which increases the risk of long-term operation. In this study, the influence of the EDT on the corrosion characteristics of carbon steel was comprehensively investigated in field CCWSs (E-CCWSs) and compared with a system using traditional chemical processes (C-CCWSs). The corrosion characteristics, corrosion products, and corrosion mechanism of carbon steel have been studied using various testing methods, including the weight loss method, electrochemical testing, Confocal Laser Scanning Microscopy (CLSM), Advanced Mineral Identification and Characterization System (AMICS), etc. The research showed that the corrosion behavior of carbon steel in a circulating water system was similar and could be divided into three stages: the initial stage (corrosion rate increased), middle stage (corrosion rate slowed down gradually), and later stage (corrosion rate was stable). Owing to the lack of the corrosion inhibitor film, the corrosion rate of carbon steel in the electrochemical circulating water system was faster in the initial stage. However, the rapidly thickened corrosion product layer had a protective effect on the carbon steel. The corrosion of carbon steel entered the middle and late stages faster, and the corrosion rate decreased rapidly and tended to stabilize. In the long term, the corrosion rate of carbon steel in the electrochemical system was slightly lower than that in the chemical system. E-CCWS encounter serious pitting problems. At 120 days, the pitting depth in electrochemical systems was 108.22 mu m, almost twice as deep as that in chemicals (54.79 mu m). This research has important reference value for corrosion prevention and risk assessment of EDT for practical applications.

The Corrosion Behavior of Carbon Steel Materials Used at Nuclear Power Plants During Deactivation and Decommissioning Processes

Corrosion Of Carbon Steel In Typical Water Environments Of Thermal Power Plant

Corrosion Behavior of 16mnr Steel and Welded Joints in High-Temperature Naphthenic Acid

CORROSION BEHAVIORS OF NUCLEAR-GRADE STAINLESS STEEL AND FERRITIC-MARTENSITIC STEEL IN SUPERCRITICAL WATER

Corrosion Behaivour of X65 Low Carbon Steel During Anaerobic Period of High Level Nuclear Waste Disposal

Corrosion Behavior and Mechanism of Irradiated 304 Nuclear Grade Stainless Steel in High-Temperature Water

Corrosion behavior of 316 stainless steel for advanced high-temperature water-cooled nuclear plant

Uniaxial Low Cycle Fatigue Behavior for Pre-Corroded 16MND5 Bainitic Steel in Simulated Pressurized Water Reactor Environment

Corrosion characteristics of Fe, Ni and Ti based alloys near the critical point of water and during supercritical water gasification and oxidation of municipal sludge

Effect of Thermal Ageing and Dissolved Gas on Corrosion of 308L Stainless Steel Weld Metal in Simulated PWR Primary Water

Corrosion Behavior of Ferritic/Martensitic Steels CNS-I and Modified CNS-II in Supercritical Water

Early corrosion properties of titanium alloys, Ni-based alloys and stainless steel in supercritical water oxidation of sewage sludge

Corrosion of 20A Carbon Steel in Boiler Water Containing Cl－ at High Temperature

Effect of Temperature and Dissolved Oxygen on Stress Corrosion Cracking Behavior of P92 Ferritic-Martensitic Steel in Supercritical Water Environment

Corrosion Behavior and Mechanism of Carbon Steel in Industrial Circulating Cooling Water System Operated by Electrochemical Descaling Technology

Corrosion of Stainless Steel in Simulated Nuclear Reactor Primary Coolant—Experiments and Modeling

Corrosion Characteristics of Low-Carbon Steel in Hot and Humid Industrial-Marine Atmosphere

Effects of Temperature on Corrosion of N80 and 3cr Steels in the Simulated $$\hbox {CO}_{2}$$ CO 2 Auxiliary Steam Drive Environment

Stress Corrosion Cracking and Mechanical Behaviors of Domestic Low Alloy Steel SA-508III in Simulated PWR Primary Water Environment

Localized Corrosion of Thermally Aged Cast Duplex Stainless Steel for Primary Coolant Pipes of Nuclear Power Plant

Microstructural Understanding of Flow Accelerated Corrosion of SA106B Carbon Steel in High-Temperature Water with Different Flow Velocities