Abstract:<p>Quantitative characterization of subsurface defects is a challenging problem in eddy current testing (ECT), not only due to the limitation of the penetration depth of eddy currents, but also due to the ill-posed nature of the inverse problem associated with quantifying a defect's 3D dimensions and its location in the test sample from measurements made on the sample surface. This paper presents a new ECT method for subsurface defect detection and quantification. Eddy currents with continuously varying frequency in a selected frequency band is induced in the conductive sample by using a chirp modulated excitation scheme. The frequency band of the chirp waveform is chosen so that the penetration depth of eddy current in the selected frequency band covers the thickness of the sample under test. The presence of a defect will disturb the distribution of the induced eddy currents. This disturbance is measured in terms of a varying magnetic field using an array of tunneling magneto-resistance (TMR) sensors. A C-scan image is obtained by linearly scanning the specimen. The footprint of the defect is calculated using spatial features of the C-scan image while the depth of the defect is estimated by analyzing the frequency characteristics of the measured chirp signal. A three-dimensional estimate of the dimensions of any subsurface defect can be obtained using the empirical procedure. The operating principle of this method is studied with a finite element method (FEM) model and then validated experimentally with a prototype array probe consisting of 180 TMR sensors. Thanks to its high sensitivity, the TMR sensors are suitable for measuring the weak low frequency magnetic field signal caused by a deep defect. The spacing between each two adjacent sensors is as small as 0.5 mm providing a magnetic field image with fine spatial resolution, which is beneficial for defect quantification. An aluminum sample with embedded defects was tested using the prototype probe. It is seen that the proposed scheme utilizing spatial and frequency domain features is capable of quantitatively characterizing subsurface defects.</p>

A Defect Visualization Method Based on ACFM Signals Obtained by a Uniaxial TMR Sensor

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

Frequency domain analysis of magnetic field images obtained using TMR array sensors for subsurface defect detection and quantification

A Novel Defect Quantification Method Utilizing Multi-Sensor Magnetic Flux Leakage Signal Fusion

A 3-D Imaging Method for Local Shallow Defects on the Surface of Ferromagnetic Materials

Deep Defects Evaluation of Conductive Materials Based on Eddy Current Nondestructive Testing with GMR sensor

A stress defect state measurement method based on low-frequency ACMFL excitation and hall sensor array collection

An Improved MFL Method Fusing Multi-Space Magnetic Field Information for The Surface Defect Inspecting

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Circumferential and Longitudinal Defect Detection Using Multiphysics Fusion Electromagnetic Sensing Probe

The Real-Time Quantitation and Display Method for Incomplete Defect MFL Signals

Identifying Surface Defect Opening Profiles Based on the Uniform Magnetic Field Distortion

Enhancement of Defect Characterization With AC Magnetic Flux Leakage: Far-Side Defect Shape Estimation and Sensor Lift-Off Compensation

A magnetoelectric-ultrasonic multimodal system for synchronous NDE of surface and internal defects in metal

Evaluation of the Size of a Defect in Reinforcing Steel Using Magnetic Flux Leakage (MFL) Measurements

A 3-D Pseudo Magnetic Flux Leakage (PMFL) Signal Processing Technique for Defect Imaging

Physical coupling fusion sensing of MFL-EMAT for synchronous surface and internal defects inspection

A New Method to Evaluate Surface Defects with an Electromagnetic Acoustic Transducer

Vector Magnetic Field Imaging With High-Resolution TMR Sensor Arrays for Metal Structure Inspection