Abstract:As a significant component of silver paste, glass frit has a nonnegligible effect on crystalline silicon solar cells. The purpose of this research is to obtain an analysis method to explore the performance of glass frit for solar cells. The samples were measured by digital microscopic system, and the three-dimensional layered tinting model was established. Moreover, the longitudinal cutting was carried out. The data of cross section was analyzed to obtain the information of melt height, wetting base angle, and melting included angle, to further infer the relationship between thermal stability, fluidity, wettability with mathematical model of glass frit through theoretical derivation. The curve fitting method was introduced in detail and the law was summarized. Based on relationship of them, the melting characteristics of glass frit could be quantitatively tested. The vertical view and surface topography were measured by the digital microscope and found that the glass frit underwent shrinkage, softening, wetting, spreading, and equilibrium during sintering. Combined with the image, abundant information was detected from the macroscopic structure of glass surface. Meanwhile, the mechanism of spreading was explained. Finally, the screen-printing technology combined with the 3D microscopic view of the silver grid line proved that glass frit with satisfactory performance can effectively reduce the contact resistance of solar cells, improve the photovoltaic conversion efficiency, verify the feasibility and accuracy of the simulation method equally. This study not only enriches the understanding of glass frit for crystalline silicon solar cells, but also provides a theoretical guidance for the research and determination of its performance.

Effect of MoO 3 /WO 3 modulation on high-temperature wettability and crystallization behavior of glass and its application in solar cell

Investigation in Feasibility of Molybdenum As A Back Contact Layer for Silicon Based Quantum Dot Solar Cells

The effect of Te-based lead-free glass powder containing Ge and Ag+ on the contact formation and electrical performance of silicon solar cells

Effect of Glass Frit Composition on Reliability of Silver Paste Metallization in Crystalline Silicon Solar Cells

Effect of the interface glass on electrical performance of screen printed Ag thick-film contacts of Si solar cells

The influence of Bi2O3 glass powder in silver paste on the fabrication of ohmic contacts and its potential effectiveness in solar cells and integrated circuits on p-type silicon substrates

Mechanism of Silver/glass Interaction in the Metallization of Crystalline Silicon Solar Cells

Effect of composition of front-electrode-paste glass on electrical performance of multicrystalline silicon solar cells

Study on the Sintering and Contact Formation Process of Silver Front Side Metallization Pastes for Crystalline Silicon Solar Cells

Enhanced interfacial wettability change materials based on graphene-doped Pb–Te–Si glass frit for wide sintering window of solar cells

Effect of Pb–Te–O glasses on Ag thick-film contact in crystalline silicon solar cells

An analytical investigation on characterizing the properties of glass composition for crystalline silicon solar cells based on the digital microsystem measurement technology

EFFECT OF GLASS FRIT WETTING PROPERTY ON THE PERFORMANCES OF SILICON SOLAR CELLS

Insight of Effect of Silver Powders on Silver‐silicon Contacts of Crystalline Silicon Solar Cells through Analysis of Glass Structural Decay

Thermal Properties of Glass Frit and Effects on Si Solar Cells

Improvement of Electrochromic Performance by Embedding ITO Nanocrystals in Amorphous WO3 Film

Investigation on PbO–B2O3–SiO2–RxOy Glasses Applied in Noncontact Silver Paste for Crystalline Silicon Solar Cells

Interface Tuning Through the MoO3 Additive in Al Paste to Enhance the Performance of Crystalline Silicon Solar Cells

Construction of efficient silicon solar cells through polymetallic oxidation-reduction triggered by thermite reaction

Interface Tuning through the MoO 3 Additive in Al Paste to Enhance the Performance of Crystalline Silicon Solar Cells

A Study of (71.5-X)sio2-xal2o3-11.5r2o-17ro Glass System: Batch Reaction Process, Structure and Properties