Abstract:Low-cost nitrogen-enriched activated carbons (PNACs) with high microporosity were prepared by a simple one-step activation doping process using KOH as a chemical activator and melamine formaldehyde (MF) as a nitrogen source. These PNACs have shown great potential as effective CO 2 adsorbents. The resulting PNACs were mainly microporous structure, with surface areas ranging from 736 to 2144 m 2 /g and total pore volumes ranging from 0.565 to 1.366 cm 3 /g. The CO 2 adsorption capacities of PNACs were in the range of 2.353 to 6.068 mmol/g and 1.59 to 4.131 mmol/g at 0 °C and 25 °C under 1 bar, respectively. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The experimental isotherm data were analyzed using various equations and the Toth isotherm equation was found to be the most accurate mathematical model to describe the CO 2 adsorption isotherm of the activated carbon. This result further confirms that PNACs have a non-homogeneous pore structure. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The exceptional CO 2 adsorption properties can be attributed to the high microporosity and nitrogen content of the PNACs. The relationship between the physicochemical properties and CO 2 adsorption performance of the activated carbon was further investigated by relevance analysis. At 0 °C and 1 bar, it was observed that the pore structure played a predominant role in the CO 2 adsorption process of PNACs. During this condition, PNACs mainly exhibited physical adsorption, which was primarily governed by the microporous filling mechanism. However, at 25 °C and 1 bar, both microporosity and nitrogen content contribute equally to the CO 2 adsorption effect. This observation confirms that the pore structure and nitrogen functional groups work synergistically to influence the CO 2 adsorption performance of PNACs. The adsorption mechanism of PNACs can be described as physical adsorption, driven by the cooperation between nitrogen functional groups and the filling of micropores. This innovative one-step activation doping process successfully converts agricultural and plastic waste into sustainable and high-performance CO 2 adsorbents. It provides new insights for mitigating the greenhouse effect and addressing the issue of plastic pollution.

Kraft Lignin-Derived Microporous Nitrogen-Doped Carbon Adsorbent for Air and Water Purification

Novel nitrogen-enriched activated carbon with tunable microporosity from Agricultural and Plastic Waste for CO 2 adsorption

Synthesis and characterization of advanced bio-carbon materials from Kraft lignin with enhanced CO2 capture properties

Preparation of Nitrogen-Doped Activated Carbon from Bio-Oil Residue for Efficient CO2 Adsorption

High-value utilization of lignin to prepare N,O-codoped porous carbon as a high-performance adsorbent for carbon dioxide capture

N-doped highly microporous carbon derived from the self-assembled lignin/chitosan composites beads for selective CO 2 capture and efficient p -nitrophenol adsorption

High adsorption of methyl orange by nitrogen-doped activated carbon derived from kraft lignin via self-activation

N-doped porous carbon derived from macadamia nut shell for CO 2 adsorption

Preparation of high surface area microporous carbons and their adsorption of nitroaniline

Nitrogen-doped porous carbons derived from sustainable biomass via a facile post-treatment nitrogen doping strategy: Efficient CO2 capture and DRM

Preparation And Characterization Of Activated Carbon From Kraft Lignin Via Koh Activation

Exploring the structural characteristics and adsorption capabilities of cost-effective N- doped activated carbon derived from waste biomass for CO2 adsorption

Preparation of nitrogen-enriched pine sawdust-based activated carbons and their application for copper removal from the aquatic environment

Novel Nitrogen‐Doped Porous Carbon with High Surface Areas Prepared from Industrial Alkali Lignin for Supercapacitors

Controlled chemical transformation of lignin by nitric acid treatment and carbonization

Preparation of in-situ nitrogen-doped lignin-based porous carbon and its efficient adsorption of chloramphenicol in water

Nitrogen configuration enriched N-doped activated carbon from spent tea leaves through an ammonia impregnation approach for CO 2 adsorption

Preparation of porous carbon from hydrothermal treatment products of modified antibiotic mycelial residues and its use in CO 2 capture

Rapid, simple and sustainable preparation of N-rich activated carbons with high performance for gas adsorption, via microwave heating

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Tailored mesoporous structures of lignin-derived nano-carbons for multiple applications