Abstract:Abstract SAGD (steam assisted gravity drainage) has been proven as an effective technology to enhance heavy oil/bitumen recovery. The main shortcoming of this method is its inefficiency, a result of high water and energy consumption. As a solution to SAGD efficiency improvement, we propose the addition of chemicals resulting in higher recovery and reduced steam consumption. The objective of this paper is to screen new generation chemicals as additives and study the mechanisms and optimum injection strategies. This screening was achieved through Hele-Shaw type macroscopic visual experiments. We previously screened a wide variety of chemical additives (Bruns and Babadagli 2017, 2018) for steam flooding. As a continuation of this work, these chemicals were tested for SAGD conditions using a new visual experimental design where the optimal injection strategies were identified, eventually providing a reference for the selection of chemical additives for field applications. 11 conventional and new generation chemical additives (heptane, biodiesel, DME, LTS-18, Tween 80, Span 80, Novelfroth 190, ionic liquid (BMMMIM BF4), silicon dioxide nanoparticle, DES9, and DES11) were selected based on both their strong thermal stability and enhanced oil recovery capability. The recovery improvement mechanisms for the different chemical additives and different injection strategies were identified through flow characteristics, emulsifying ability, viscosity reduction capability, and wettability alteration. Simultaneously, the mechanisms were studied from a macro perspective via analyzing areal sweep efficiency and microscopic oil displacement efficiency together with observing the images acquired during the process. Three different injection strategies were applied for each chemical: (1) chemicals were injected at the beginning, (2) in the middle, and (3) at the end of the steam injection. The chemical additives played different roles in recovery improvement, and different chemical addition strategies yielded different mechanisms. Heptane exhibited extraordinary characteristics with maximum "steam saving" (34.52%) when the middle injection strategy was applied and maximum ultimate oil recovery (64.75%) was obtained for the end injection strategy due to the ability to reduce the viscosity of heavy oil by dissolving around the chamber edge. Steamflooding with Novelfroth 190 showed an excellent performance for the middle and end injection strategies due to its ability to develop rapid oil drainage "channels". The addition of surfactant LST-18 presented the ability to improve the EOR by forming emulsions. Additionally, the distributions of the steam chamber in the Hele-Shaw cell were different due to the changed flow characteristics when the same chemical additive was injected at different times, thus showing the ability to reduce viscosity and form emulsions with different strengths.

Investigation of EOR mechanism for flue gas assisted SAGD

Analysis of Factors on Flue Gas Assisted SAGD Based on a 2D Visualization Physical Model

Experimental Investigation and Numerical Simulation of Dynamic Characteristics for Multithermal Fluid-Assisted SAGD in Extraheavy Oil Reservoir

Improving Thermal Efficiency and Reducing Emissions with CO2 Injection during Late Stage SAGD Development

Thermal flue gas utilization in delivering unconventional geo-energy

Numerical Simulation on Process of Fluid Flow and Heat Transfer of CO2 Assisted SAGD Technology

An innovative in situ solvent generation enhanced SAGD technique: Mechanism analysis based on numerical simulation

Insights on Heat Transfer at the Top of Steam Chambers in Sagd

Investigation of the Heat Transfer Mechanism of CO2-Assisted Steam Injection via Experimental and Simulation Evaluation

Multi-stage development process and model of steam chamber for SAGD production in a heavy oil reservoir with an interlayer

Study on Thermal Chamber Expansion of VH-SAGD Process Using CO2-Inducing Effect for Heavy Oil Reservoirs

Visual Analysis of SAGD with Chemical Additives

Experimental study on the mechanism of associated gas generation by heavy oil aquathermolysis and thermal cracking during steam injection

Strategies of SAGD Start-Up by Downhole Electrical Heating

Experimental and numerical investigation on extra-heavy oil recovery by steam injection using vertical injector -horizontal producer

Convection beyond the Steam Chamber Interface in the Steam-Assisted-Gravity-Drainage Process

Rising-phase performance evaluation of Expanding-Solvent SAGD: Considering the horizontal-wellbore effect

Experimental Study on Well Placement Optimization for Steam-Assisted Gravity Drainage to Enhance Recovery of Thin Layer Oil Sand Reservoirs

Experimental study and numerical simulation of urea-assisted SAGD in developing exra-heavy oil reservoirs

Numerical investigation of flue gas injection enhanced underground coal seam gas drainage

Study of steam heat transfer enhanced by CO 2 and chemical agents: In heavy oil production