Abstract:Steam-Assisted Gravity Drainage (SAGD) is a recovery process used to extract bitumen from underground reservoirs. The efficiency of SAGD is determined by the volume of steam injected (reflecting cost and greenhouse gas emissions) relative to the volume of oil recovered (revenue). Another way to look at this relationship is as a ratio of cumulative energy produced to energy injected (EPEI). First described in this study, EPEI ratios offer a novel perspective on SAGD because they reduce the inter-well comparison bias caused by operational choices such as steam temperature, steam quality and well length. There are numerous studies on SAGD from an experimental, analytical or numerical simulation perspective, but all require assumptions and constraints specified in advance, and can only return an approximation of field performance. Studies that work exclusively with field data have typically been used for prediction modeling only. In contrast, this study employs a novel methodology by working within the existing constraints and operational choices of SAGD field wells to infer the number of steam-oil performance relationships present, and how long they last. One by one, we eliminate parameters that cannot cause the performance differences seen in the field using only deductive reasoning and multi-parameter sensitivity analysis, and arrive at possible reasons for the performance relationships found. 1520 SAGD well pairs in Alberta, Canada are used, which is more than 90% of the wells in Alberta over the last 20 years, and to the best of our knowledge, the largest field well set of any SAGD study to date. This comprehensive data set ensures that findings are applicable across the industry. Results reveal a new and surprising finding that the EPEI ratio is set during the first few months on production, and is very difficult to change thereafter. Hence, operators have a short, time-limited opportunity to influence each well's recovery ratio (and therefore its profitability and greenhouse gas emissions). This reflects the importance of process start-up and the first few months after start-up when the near well region of the reservoir is conditioned. Finally, the stability of the EPEI ratio permits a simple, new model capable of predicting cumulative recovery months in advance.

Insights on Heat Transfer at the Top of Steam Chambers in Sagd

Convection beyond the Steam Chamber Interface in the Steam-Assisted-Gravity-Drainage Process

Influence of top water on SAGD steam chamber growth in heavy oil reservoirs: An experimental study

On the Ratio of Energy Produced to Energy Injected in SAGD: Long-term Consequences of Early Stage Operational Decisions

Experimental Investigation and Numerical Simulation of Dynamic Characteristics for Multithermal Fluid-Assisted SAGD in Extraheavy Oil Reservoir

Improving Thermal Efficiency and Reducing Emissions with CO2 Injection during Late Stage SAGD Development

An innovative in situ solvent generation enhanced SAGD technique: Mechanism analysis based on numerical simulation

Investigation of EOR mechanism for flue gas assisted SAGD

Study on Characteristics of Steam Chamber and Factors Influencing Nitrogen-Assisted Vertical–Horizontal Steam Drainage Development

Research on the Influence of Sand-Mud Interlayer Properties on the Expansion of SAGD Steam Chamber

Multi-stage development process and model of steam chamber for SAGD production in a heavy oil reservoir with an interlayer

Rising-phase performance evaluation of Expanding-Solvent SAGD: Considering the horizontal-wellbore effect

Thermal flue gas utilization in delivering unconventional geo-energy

A coupled model for predicting thermophysical properties of saturated steam in dual-tubing SAGD horizontal wells with toe-point injection technique

Electromagnetic Heating Method to Improve Steam Assisted Gravity Drainage

A new pressure control scheme on steam‐assisted gravity drainage for heavy oil production

Strategies of SAGD Start-Up by Downhole Electrical Heating

Physical and Numerical Simulations of Steam Drive and Gravity Drainage Using the Confined Bottom Oil–Water Transition Zone to Develop Super Heavy Oil

Coupling of steam chamber and liquid pool during steam-assisted gravity drainage process in heavy oil reservoirs

Maximizing efficiency and uniformity in SAGD steam circulation through effect of heat convection

Analysis of Factors on Flue Gas Assisted SAGD Based on a 2D Visualization Physical Model