Abstract:Multiple thermal fluids injection process is a new heat-carrier process proposed in recent years as an EOR process for heavy oil reservoirs. Compared with the conventional saturated-steam injection process, it combines the multiple advantages of immiscible and/or miscible gas injection and thermal recovery processes. In this paper, based on the ideas of the multiple thermal fluids injection process and the conventional steam assisted gravity drainage (SAGD) process, a new recovery process, multiple thermal fluids assisted gravity drainage (MFAGD) process is proposed to enhance heavy oil recovery for post SAGD reservoirs. Two 3D gravity drainage experiments (SAGD and SAGD-MFAGD) are first conducted to explore EOR mechanisms of the multiple thermal fluids in heavy oil reservoirs. Subsequently, numerical simulations are performed to match the experimental measurements. Then the EOR mechanisms and the remaining oil saturation distribution are analyzed. Furthermore, the differences between the SAGD, steam-and-gas-push (SAGP) and MFAGD processes are discussed. From a dimensionless scaling analysis for gravity drainage process, lab scale parameters are converted to field scale ones, and a field scale simulation model is developed. Through the analysis and simulation, the reservoir adaptability of the MFAGD process is investigated, and its operation parameters are numerically optimized. Experimental results indicate that a strategic combination of the SAGD and MFAGD processes can tremendously improve the development of heavy oil reservoirs. The MFAGD process can be adopted as a follow-up recovery technique after the SAGD process for heavy oil reservoirs. As its EOR mechanisms, in addition to the conventional thermal recovery mechanisms of steam injection, the results show that heat insulation, energy recovery, gas dissolution, foamy oil and auxiliary well cleanup are all its important mechanisms. In comparison with SAGD, this new process has a higher recovery rate, a lower steam injecting volume and a lower cumulative steam-oil ratio (cSOR). Numerical results also show that the steam chamber from MFAGD is shaped like a liquid drop instead of a conventional inverted triangle from SAGD. The net-to gross value and formation thickness have a great influence on the performance of MFAGD. It is found that for MFAGD, the optimal steam-gas ratio in the standard conditions is 1:1, the steam injection rate is 200 m(3)/d, and the operation pressure is 3.0 MPa for the study reservoir. The MFAGD process will be a potentially important EOR method for post SAGD heavy oil and oil sands reservoirs.

Experimental Investigation and Numerical Simulation of Dynamic Characteristics for Multithermal Fluid-Assisted SAGD in Extraheavy Oil Reservoir

Experimental and numerical investigation on extra-heavy oil recovery by steam injection using vertical injector -horizontal producer

A semi-analytical model based on unsteady conductive heat transfer in steam-assisted gravity drainage (SAGD)

Numerical Simulation on Process of Fluid Flow and Heat Transfer of CO2 Assisted SAGD Technology

Performance of Multiple Thermal Fluids Assisted Gravity Drainage Process in Post Sagd Reservoirs

Investigation of EOR mechanism for flue gas assisted SAGD

Study on Characteristics of Steam Chamber and Factors Influencing Nitrogen-Assisted Vertical–Horizontal Steam Drainage Development

Thermal flue gas utilization in delivering unconventional geo-energy

Physical and Numerical Simulations of Steam Drive and Gravity Drainage Using the Confined Bottom Oil–Water Transition Zone to Develop Super Heavy Oil

Experimental investigation of innovative superheated vapor extraction technique in heavy oil reservoirs: A two-dimensional visual analysis

An innovative in situ solvent generation enhanced SAGD technique: Mechanism analysis based on numerical simulation

Influence of top water on SAGD steam chamber growth in heavy oil reservoirs: An experimental study

Optimization of Geological Design for SAGD Process in Super Heavy Oil Reservoirs Using a Combination of Vertical and Horizontal Wells

Experimental and simulation studies on steam stimulation with multiple fluids for offshore heavy oil reservoirs

Coupling of steam chamber and liquid pool during steam-assisted gravity drainage process in heavy oil reservoirs

Improving Thermal Efficiency and Reducing Emissions with CO2 Injection during Late Stage SAGD Development

Study on Thermal Chamber Expansion of VH-SAGD Process Using CO2-Inducing Effect for Heavy Oil Reservoirs

Analysis of steam–solvent–bitumen phase behavior and solvent mass transfer for improving the performance of the ES-SAGD process

Multi-stage development process and model of steam chamber for SAGD production in a heavy oil reservoir with an interlayer

Convection beyond the Steam Chamber Interface in the Steam-Assisted-Gravity-Drainage Process

A new pressure control scheme on steam‐assisted gravity drainage for heavy oil production