Abstract:SAGD (steam-assisted gravity drainage) technique is one of the most efficient thermal recovery technologies for exploiting Mackay River thin layer oil sand reservoirs. However, when making use of the traditional SAGD technique (the production and injection well are located on the same axis with the horizontal well spacing of 0 m), the steam chamber development is usually insufficient because of the high longitudinal sweep rate of steam, which seriously influences the SAGD performance for developing thin layer oil sand reservoirs especially. It is extremely important to find an economical and practicable method to promote the steam chamber development in thin oil sand reservoirs in the process of SAGD production; optimizing well placement is a reliable method. In this paper, an improved well placement method is proposed to enhance production performance of traditional SAGD, which is changing the horizontal well spacing to place the production well below of the side of the injection well (two wells are not located on the same axis). Three groups of 2D visualization experiments with different horizontal distances between two wells (0 cm, 10 cm, and 20 cm) were carried out, respectively, to observe the development and change of the steam chamber development, and to explore the EOR mechanisms. On the 2D experiment basis, optimal horizontal distance was selected to perform 3D physical simulation experiment to study and verity the production mechanism systematically. The results of 2D visualization experiment showed that the final oil recoveries of experimental groups with 10 cm and 20 cm horizontal distances were 7.6% and 2.3% higher than those of traditional SGAD (horizontal distance was 0 cm), respectively. Combined with 3D experimental results, the change in the horizontal relative position of two wells makes the steam first spread laterally between injecting and producing wells; thus, the lateral development of the steam chamber was promoted, and changes of temperature field also display that the lateral sweep area of steam was increased obviously and the form of steam chamber is changed. Meanwhile, the generation of appropriate horizontal well spacing can combine the effect of steam displacement and gravity drainage better and improve the sweep efficiency of steam. Nevertheless, the overlarge horizontal well spacing will also hinder the steam chamber development because the strength of steam overlap is weakened. Furthermore, the findings of this study help for better understanding that changing the horizontal well spacing can promote the lateral development of steam chamber, which can be used to enhance the oil recovery of thin layer oil sand reservoirs especially.

Optimization of Geological Design for SAGD Process in Super Heavy Oil Reservoirs Using a Combination of Vertical and Horizontal Wells

Fuzzy methods to evaluate the development effects of SAGD technology and its application during the middle and later stages of super-heavy oil reservoirs

Experimental Study on Well Placement Optimization for Steam-Assisted Gravity Drainage to Enhance Recovery of Thin Layer Oil Sand Reservoirs

Experimental Investigation and Numerical Simulation of Dynamic Characteristics for Multithermal Fluid-Assisted SAGD in Extraheavy Oil Reservoir

Physical and Numerical Simulations of Steam Drive and Gravity Drainage Using the Confined Bottom Oil–Water Transition Zone to Develop Super Heavy Oil

Experimental and numerical investigation on extra-heavy oil recovery by steam injection using vertical injector -horizontal producer

Study on Characteristics of Steam Chamber and Factors Influencing Nitrogen-Assisted Vertical–Horizontal Steam Drainage Development

Coupling of steam chamber and liquid pool during steam-assisted gravity drainage process in heavy oil reservoirs

A new pressure control scheme on steam‐assisted gravity drainage for heavy oil production

Visualization Experimental Study on Well Spacing Optimization of SAGD with a Combination of Vertical and Horizontal Wells

In-situ solvents generation enhanced steam assisted gravity drainage (ISSG-SAGD): A low carbon and high-efficiency approach for heavy oil recovery

Multi-stage development process and model of steam chamber for SAGD production in a heavy oil reservoir with an interlayer

Oil Production Rate Predictions for Steam Assisted Gravity Drainage Based on High-Pressure Experiments

Using Cyclic Injection-production Technology to Improve the Development Effect of Water Flooding in Ultra-high Water Cut Stage

An innovative in situ solvent generation enhanced SAGD technique: Mechanism analysis based on numerical simulation

Improving Thermal Efficiency and Reducing Emissions with CO2 Injection during Late Stage SAGD Development

A Numerical Simulation Approach for Superheated Steam Flow during Multipoint Steam Injection in Horizontal Well

Physical Simulation of Improving the Uniformity of Steam Chamber Growth in the Steam Assisted Gravity Drainage

A comprehensive investigation of SAGD steam chamber in dual horizontal well pairs: Expansion angel and connection characteristics

A coupled model for predicting thermophysical properties of saturated steam in dual-tubing SAGD horizontal wells with toe-point injection technique

Strategies of SAGD Start-Up by Downhole Electrical Heating