Abstract:Summary Dual-pipe steam injection technique has currently demonstrated technical potential for improving heavy oil recovery. It can effectively delay the occurrence of steam fingering and homogenize the steam injection profile along the horizontal wellbore. In this paper, first, we built a cylindrical wellbore physical model to experimentally study the steam injection profiles of a single-pipe horizontal well and a concentric dual-pipe horizontal well. Thus, the heat and mass transfer behavior of steam along the horizontal wellbore with a single-pipe well configuration and a dual-pipe well configuration was addressed. Subsequently, considering the effect of pressure drops and heat loss, a semianalytical model for the gas/liquid two-phase flow in the horizontal wellbore was developed to numerically match the experimental observation. Next, a sensitivity analysis on the physical parameters and operation properties of a steam injection process was conducted. The effect of the injection fluid type was also investigated. Experimental results indicated that under the same steam injection condition, an application of dual-pipe well configuration can significantly enhance the oil drainage volume by approximately 35% than the single-pipe well configuration. During the experiments, both a temperature distribution and liquid production along the horizontal wellbore were obtained. A bimodal temperature distribution can be observed for the dual-pipe well configuration. From this proposed model, an excellent agreement can be found between the simulation results and the experimental data. Because of the effect of variable mass flowing behavior and pressure drops, the wellbore segment close to the steam outflow point can have a higher heating radius than that far from the steam outflow point. From the results of sensitivity analysis, permeability heterogeneity and steam injection parameters have a tremendous impact on the steam injection profile along the wellbore. Compared with a pure steam injection process, the coinjection of steam and noncondensable gas (NCG) can improve the effective heating wellbore length by more than 25%. This model is also applied to predict the steam conformance of an actual horizontal well in Liaohe Oilfield. This paper presents some information regarding the heat and mass transfer of a dual-pipe horizontal well, as well as imparts some of the lessons learned from its field operation.

A coupled model for predicting thermophysical properties of saturated steam in dual-tubing SAGD horizontal wells with toe-point injection technique

A Numerical Model for Investigating the Steam Conformance along the Dual-String Horizontal Wells in SAGD Operations

A semi-analytical model based on unsteady conductive heat transfer in steam-assisted gravity drainage (SAGD)

Steam Conformance along Horizontal Well with Different Well Configurations of Single Tubing: an Experimental and Numerical Investigation

A Numerical Simulation Approach for Superheated Steam Flow during Multipoint Steam Injection in Horizontal Well

Physical Simulation of Improving the Uniformity of Steam Chamber Growth in the Steam Assisted Gravity Drainage

Coupling of steam chamber and liquid pool during steam-assisted gravity drainage process in heavy oil reservoirs

Maximizing efficiency and uniformity in SAGD steam circulation through effect of heat convection

The heat and mass transfer characteristics of superheated steam in horizontal wells with toe-point injection technique

Effect analysis of non-condensable gases on superheated steam flow in vertical single-tubing steam injection pipes based on the real gas equation of state and the transient heat transfer model in formation

Mathematical Modeling of Heat Transfer and Pressure Drops in the Single- and Dual-Pipe Horizontal Wells

Experimental Investigation and Numerical Simulation of Dynamic Characteristics for Multithermal Fluid-Assisted SAGD in Extraheavy Oil Reservoir

Transient Convective Heat Transfer in a Steam-Assisted Gravity Drainage (SAGD) Process

Experimental investigation on the steam injection profile along horizontal wellbore

A Model to Estimate Heat Efficiency in Steam-Assisted Gravity Drainage by Condensate and Initial Water Flow in Oil Sands

A Novel Prediction Model for Steam Temperature Field of Downhole Multi-Thermal Fluid Generator

A Coupled Model of Two-Phase Fluid Flow and Heat Transfer to Transient Temperature Distribution and Seepage Characteristics for Water-Flooding Production Well with Multiple Pay Zones

Oil Production Rate Predictions for Steam Assisted Gravity Drainage Based on High-Pressure Experiments

Multi-stage development process and model of steam chamber for SAGD production in a heavy oil reservoir with an interlayer

Study on Characteristics of Steam Chamber and Factors Influencing Nitrogen-Assisted Vertical–Horizontal Steam Drainage Development

Research on Temperature–Pressure Coupling Model of Gas Storage Well during Injection Production