Abstract:Summary Dual-pipe steam injection technique has currently demonstrated technical potential for improving heavy oil recovery. It can effectively delay the occurrence of steam fingering and homogenize the steam injection profile along the horizontal wellbore. In this paper, first, we built a cylindrical wellbore physical model to experimentally study the steam injection profiles of a single-pipe horizontal well and a concentric dual-pipe horizontal well. Thus, the heat and mass transfer behavior of steam along the horizontal wellbore with a single-pipe well configuration and a dual-pipe well configuration was addressed. Subsequently, considering the effect of pressure drops and heat loss, a semianalytical model for the gas/liquid two-phase flow in the horizontal wellbore was developed to numerically match the experimental observation. Next, a sensitivity analysis on the physical parameters and operation properties of a steam injection process was conducted. The effect of the injection fluid type was also investigated. Experimental results indicated that under the same steam injection condition, an application of dual-pipe well configuration can significantly enhance the oil drainage volume by approximately 35% than the single-pipe well configuration. During the experiments, both a temperature distribution and liquid production along the horizontal wellbore were obtained. A bimodal temperature distribution can be observed for the dual-pipe well configuration. From this proposed model, an excellent agreement can be found between the simulation results and the experimental data. Because of the effect of variable mass flowing behavior and pressure drops, the wellbore segment close to the steam outflow point can have a higher heating radius than that far from the steam outflow point. From the results of sensitivity analysis, permeability heterogeneity and steam injection parameters have a tremendous impact on the steam injection profile along the wellbore. Compared with a pure steam injection process, the coinjection of steam and noncondensable gas (NCG) can improve the effective heating wellbore length by more than 25%. This model is also applied to predict the steam conformance of an actual horizontal well in Liaohe Oilfield. This paper presents some information regarding the heat and mass transfer of a dual-pipe horizontal well, as well as imparts some of the lessons learned from its field operation.

The heat and mass transfer characteristics of superheated steam in horizontal wells with toe-point injection technique

A Numerical Simulation Approach for Superheated Steam Flow during Multipoint Steam Injection in Horizontal Well

Steam Conformance along Horizontal Well with Different Well Configurations of Single Tubing: an Experimental and Numerical Investigation

Mathematical Modeling of Heat Transfer and Pressure Drops in the Single- and Dual-Pipe Horizontal Wells

A coupled model for predicting thermophysical properties of saturated steam in dual-tubing SAGD horizontal wells with toe-point injection technique

Numerical study of temperature‐pressure coupling model for the horizontal well with a slim hole

Numerical Simulation of Flow and Heat Transfer Performance During Supercritical Water Injection in Vertical Wellbore: A Parameter Sensitivity Analysis

Effect analysis of non-condensable gases on superheated steam flow in vertical single-tubing steam injection pipes based on the real gas equation of state and the transient heat transfer model in formation

Experimental investigation on the steam injection profile along horizontal wellbore

Numerical Simulation of Non-Isothermal Supercritical Water Flow in Ground Pipeline and Wellbore: an Interactive Sensitivity Analysis and Injection Parameters Optimization

A novel analytical transient heat-conduction time function for heat transfer in steam injection wells considering the wellbore heat capacity

Thermal recovery of coalbed methane: Modeling of heat and mass transfer in wellbores

A Numerical Model for Investigating the Steam Conformance along the Dual-String Horizontal Wells in SAGD Operations

Analysis for Flow and Heat Transfer of Thermal Recovery Well with Steam and Multiple Thermal Fluids Injection

Technical Research on Improving Efficiency of Steam Injection in Horizontal Wells for Heavy Oil Reservoirs

Heat extraction study of a novel hydrothermal open-loop geothermal system in a multi-lateral horizontal well

Integrated workflow of temperature transient analysis and pressure transient analysis for multistage fractured horizontal wells in tight oil reservoirs

Study on temperature distribution along wellbore of fracturing horizontal wells in oil reservoir

Computational Fluid Dynamics Modeling and Analysis of Axial and Radial Temperature of Wellbore during Injection and Production Process

Analysis on Heat Transfer and Steam Injection in the Wellbore and Calculation on Heat Loss

A prediction model of wellbore temperature and pressure distribution in hydrocarbon gas injection well