Abstract:Summary To solve problems such as additional tubing/casing load, casing deformation, and packer failure caused by changes in annular temperature during oil and gas reservoir fracturing and production, based on the well structure of oil and gas reservoirs and transition transient heat transfer mechanism, a four-field coupling simulation model of the temperature field in the main fluid domain of the tubing, the temperature field in the solid domain of the tubing, the temperature field in the annular fluid domain, and the temperature field in the solid domain of the casing is proposed. Considering the coupling of fluid temperature, pressure, and physical parameters, boundary conditions are established based on reservoir characteristics, wellbore heat transfer characteristics, and fracturing and production conditions, and are compiled into Fluent software for simulation through the user-defined function (UDF) method. The effects of the temperature and flow rate of injected fracturing fluid and produced oil and gas on the distribution of the wellbore temperature field and temperature gradient are studied. The research results show that by applying D14-1 and D5-5 gas wells to the model, the simulated temperature is in good agreement with the measured wellbore temperature, and the maximum errors of the simulated values of the two different wells are 6.4% and 4.3%, respectively. As the injection and production operation time increase, the heat transfer between the wellbore and the formation gradually stabilizes. At this time, the injection and production flow rate have little impact on the wellbore temperature field, while the injection and production temperature have a greater impact on the wellbore temperature field. The injection and production temperature will cause changes in annular temperature and temperature gradient, leading to an increase or decrease in pressure within a limited annular volume, resulting in local stress on the tubing and casing. The research results can provide a theoretical basis for the analysis of the temperature field and pressure field of the wellbore during fracturing and oil and gas production, ensuring the safety and stability of fracturing and production.

Analysis on Heat Transfer and Steam Injection in the Wellbore and Calculation on Heat Loss

Heat Conduction Analysis on the Evaporator in Gravity Heat Pipe of Heavy Oil Wellbore

Study of Heat Loss Control for 3D Model in High Temperature and Pressure

Thermal Hydraulic Analysis Using GIS on Application of HTR to Thermal Recovery of Heavy Oil Reservoirs

The heat and mass transfer characteristics of superheated steam in horizontal wells with toe-point injection technique

A Numerical Simulation Approach for Superheated Steam Flow during Multipoint Steam Injection in Horizontal Well

Steam Cavity Expansion Model for Steam Flooding in Deep Heavy Oil Reservoirs

A prediction model of wellbore temperature and pressure distribution in hydrocarbon gas injection well

Experimental investigation on the steam injection profile along horizontal wellbore

Effect analysis of non-condensable gases on superheated steam flow in vertical single-tubing steam injection pipes based on the real gas equation of state and the transient heat transfer model in formation

An improved thermal model for predicting wellbore temperature distribution in deep-water gas well

Energy conversion model and evaluation criteria of steam injection process in heavy oil recovery

A Novel Prediction Model for Steam Temperature Field of Downhole Multi-Thermal Fluid Generator

Research on Hybrid Modeling Simulation Method of Steam Dynamic Transmission and Distribution Process

Experimental Investigation and Numerical Simulation of Dynamic Characteristics for Multithermal Fluid-Assisted SAGD in Extraheavy Oil Reservoir

Research and Application of Wellbore Temperature Field Models for Thermal Recovery Well in Offshore Heavy Oilfield

Computational Fluid Dynamics Modeling and Analysis of Axial and Radial Temperature of Wellbore during Injection and Production Process

The Sensitivity Analysis of Wellbore Heat Transfer During the Co2 Injection Process

Numerical model of multiphase percolation flow through porous media in the thermal recovery process and its application

Numerical Simulation of Natural Convection and Calculation of Heat Transfer Coefficient in Wellbore Annulus during Deep-Water Gas Well Testing

The Sensitivity Analysis of Wellbore Heat Transfer during the CO<sub>2</sub> Injection Process