Study of steam heat transfer enhanced by CO 2 and chemical agents: In heavy oil production

Ya-Li Liu,Chao Zhang,Song-Yan Li,Zhao-Min Li
DOI: https://doi.org/10.1016/j.petsci.2022.09.034
IF: 4.757
2022-10-05
Petroleum Science
Abstract:Steam flooding with the assistance of carbon dioxide (CO 2 ) and chemicals is an effective approach for enhancing super heavy oil recovery. However, the promotion and application of CO 2 and chemical agent-assisted steam flooding technology have been restricted by the current lack of research on the synergistic effect of CO 2 and chemical agents on enhanced steam flooding heat transfer. The novel experiments on CO 2 -chemicals cooperate affected steam condensation and seepage were conducted by adding CO 2 and two chemicals (sodium dodecyl sulfate (SDS) and the betaine temperature-salt resistant foaming agent ZK-05200). According to the experimental findings, a "film" formed on the heat-transfer medium surface following the co-injection of CO 2 and the chemical to impede the steam heat transfer, reducing the heat transfer efficiency of steam, heat flux and condensation heat transfer coefficient. The steam seepage experiment revealed that the temperature at the back end of the sandpack model was dramatically raised by 3.5–12.8 °C by adding CO 2 and chemical agents, achieving the goal of driving deep-formation heavy oil. The combined effect of CO 2 and SDS was the most effective for improving steam heat transfer, the steam heat loss was reduced by 6.2%, the steam condensation cycle was prolonged by 1.3 times, the condensation heat transfer coefficient was decreased by 15.5%, and the heavy oil recovery was enhanced by 9.82%. Theoretical recommendations are offered in this study for improving the CO 2 -chemical-assisted steam flooding technique.
energy & fuels,engineering, petroleum
What problem does this paper attempt to address?