Abstract:This work demonstrates aluminum scandium nitride on silicon carbide (AlScN/SiC) heterostructure thin film micromachined resonant transducers operating in a high‐temperature environment up to 600 °C. Macroscopic and microscopic vibrations are investigated through a combination of laser interferometry techniques and Raman spectroscopy. The results provide insight for understanding the resonant characteristics and intrinsic material properties of AlScN/SiC at both device and crystal structure levels. The experimental demonstration of aluminum scandium nitride (AlScN)‐on‐cubic silicon carbide (SiC) heterostructure thin film micromachined resonant transducers operating in a high‐temperature environment up to 600 °C is reported. Macroscopic and microscopic vibrations are investigated through a combination of ultrasensitive laser interferometry techniques and Raman spectroscopy. An average linear temperature coefficient of resonance frequency (TCf) of <1 ppm °C−1 within the temperature range from room temperature to 200 °C, and an average linear TCf of −16 ppm °C−1 between 200 and 600 °C, from the fundamental‐mode resonance of AlScN/SiC circular diaphragm resonator with a thickness of 1.9 μm and diameter of 250 μm, is obtained. Higher‐order modes exhibit much larger TCf, which make them strong candidates as high‐temperature‐tolerant temperature sensors or ultraviolet detectors. Raman spectroscopy indicates that the turning points of the peak positions of the longitudinal optical phonon modes of both 3C‐SiC and AlScN occur in almost the same temperature region where the turnover point of TCf is observed, suggesting that the microscopic vibrations in the crystal lattice and the macroscopic oscillation of the diaphragm are naturally mediated by the residual strain inside the materials at varying temperature.

AlScN‐on‐SiC Thin Film Micromachined Resonant Transducers Operating in High‐Temperature Environment up to 600 °C

AlScN-on-SiC microelectromechanical Lamb wave resonators operating at high temperature up to 800 °C

Aluminum Scandium Nitride as a Functional Material at 1000°C

Near 6 GHz Sezawa Mode Surface Acoustic Wave Resonators using AlScN on SiC

AlN/6H-SiC SAW resonator for high temperature wireless SAW sensor

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

A ScAlN-based piezoelectric breathing mode dual-ring resonator with high temperature stability

Temperature-dependent properties of wurtzite and rock salt Sc x Al 1-x N for applications in BAW resonators

Alscn Thin Film Based Surface Acoustic Wave Devices with Enhanced Microfluidic Performance

A Scandium Doped Aluminum Nitride Thin Film Bulk Acoustic Resonator

High Performance AlScN Thin Film Based Surface Acoustic Wave Devices with Large Electromechanical Coupling Coefficient

AlScN-Based Dual-Mode Devices With Temperature Compensated Strategy and Process Optimization

Enhanced electromechanical coupling coefficient and performance of AlScN/Si surface acoustic wave devices by scandium doping

Elastic Strain Engineered Nanomechanical GaN Resonators with Thermoelastic Dissipation Dilution Up to 600 K

Rayleigh Wave Suppression in Al0.6Sc0.4N-on-SiC Resonators

ScAlN/3C-SiC/Si platform for monolithic integration of highly sensitive piezoelectric and piezoresistive devices

Design and Fabrication of an Surface Acoustic Wave Resonator Based on AlN/4H-SiC Material for Harsh Environments

Multiphysics Modeling and Analysis of Sc-Doped AlN Thin Film Based Piezoelectric Micromachined Ultrasonic Transducer by Finite Element Method

High Quality Co-Sputtering AlScN Thin Films for Piezoelectric Lamb-Wave Resonators

Effects of High-Temperature Thermal Annealing on the Crystal Structure and Phase Separation in Sputtered ScAlN Thin Films

Al1−xScxN Thin Films at High Temperatures: Sc-Dependent Instability and Anomalous Thermal Expansion