Abstract:Fiber Bragg grating (FBG) has been widely used in many fields for the measurement of temperature, strain, and other parameters, but single-mode FBG has a cross-sensitivity problem between temperature and strain. In this article, a new scheme is proposed to solve the problem by using parallel core–cladding FBGs, whose grating areas are located at the interface region of the core and cladding of the fiber. The sensing principle of parallel core–cladding FBGs for the simultaneous measurement of temperature and strain is theoretically analyzed. The femtosecond laser point-by-point method of the parallel core–cladding FBGs is experimentally investigated. Two parallel FBGs, namely, core FBG and cladding FBG, are formed efficiently and conveniently by a single time inscription. Two transmission peaks have been observed, which are excited by the core mode and the cladding mode. The experiment results demonstrated that the proposed compact sensor can detect the temperature with sensitivity of 11.043 pm/°C and strain with sensitivity of 1.2101 pm/ up to , and the relative errors of temperature and strain are less than 5.8% and 8.3%, respectively. The proposed parallel core–cladding FBGs are much more compact as one FBG element compared with the conventional structure with two cascaded FBGs or parallel FBGs. The parallel core–cladding FBGs can overcome the cross-sensitivity problem of single-mode FBG, which has great application value and potential in fiber sensing fields for dual-parameter.

Symmetry selective cladding modes coupling in ultrafast-written fiber Bragg gratings in two-mode fiber

Cladding mode coupling in highly localized fiber Bragg gratings: modal properties and transmission spectra

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

Sensing characteristics of grating assisted counterpropagating cladding modes in optical fibers

Cladding-Mode Obtained By Core-Offset Structure And Applied In Fiber Bragg Grating Sensor

Cladding modes of optical fibers: properties and applications

Fiber Bragg gratings fabricated in fibers with different geometries by femtosecond laser written through the coating and their applications in strain sensing and fiber laser

Sensing capabilities of higher order cladding modes

Selective fiber Bragg grating inscription in multicore fiber by femtosecond laser and phase mask

Femtosecond Laser Inscription of Fiber Bragg Grating in Twin-Core Few-Mode Fiber for Directional Bend Sensing

Cladding-Mode Backward-Recoupling-Based Displacement Sensor Incorporating Fiber Up Taper and Bragg Grating

A Fiber Bragg Grating Sensor Based on Cladding Mode Resonance for Label-Free Biosensing

Slow light with flat or offset band edges in multi-mode fiber with two gratings

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

On-line Writing of Fiber Bragg Grating Array on a Two-mode Optical Fiber for Sensing Applications

Core-cladding mode recoupling based fiber optic refractive index sensor

Brillouin Optical Time-Domain Distributed Analysis of Cladding Modes in a Coated Fiber

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

Ultra-fast fiber Bragg grating inscription in CYTOP polymer optical fibers using phase mask and 400 nm femtosecond laser

All-fiber, high-speed, and high-resolution dispersion measurements of chirped fiber Bragg gratings

Spectrum design of multimode fiber Bragg gratings based on suppression of mode coupling