Abstract:Drawing-tower fiber Bragg grating (FBG) array can be used in health monitoring of bridges, pipelines and some large-scale projects to realize temperature, stress and vibration quasi-distributed sensing. The grating array sensing system can detect the changes of the tested physical parameters by measuring the central wavelength of the grating. However, for the sensing system based on identical grating array consisting of uniform FBGs, it cannot measure accurately the shift of the reflective wavelength of a grating in the array due to the sidelobe superposition of the gratings. Compared with uniform Bragg grating, apodized FBG has smaller reflection peak sidelobes. It means that the reflection power of the apodized FBG can be concentrated to the central wavelength region, and the reflection peak signal will be not interfered with those of other gratings. In this paper, an apodized FBG array was in-line fabricated in a single mode fiber by on a drawing tower and used for dense quasi-distributed temperature sensing. The obtained apodized FBGs have a full width at half maximum (FWHM) of 0.09 nm and their sidelobes were decreased by -21.9 dB. A 1000-meter-long array consisting of 10000 apodized gratings was successfully fabricated and used for quasi-distributed temperature sensing. These gratings have good consistency, low transmission loss and good mechanical properties. Experimental results show that the array can accurately measure quasi-distributed temperature fields and the temperature sensitivity is 10.15 pm/degrees C. It is expected that the apodized grating array can find more applications in many fields.

On-line Writing of Fiber Bragg Grating Array on a Two-mode Optical Fiber for Sensing Applications

Multi-parameter and Multi-functional Fiber Grating Sensing Technology

Quasi-Distributed Temperature Sensing Using Apodized Fiber Bragg Grating Array

Large Range Curvature Measurement Using FBGs in Two-Core Fiber with Protective Coating

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Temperature-Insensitive Fiber Bragg Grating Sensing System for Curvature Measurement Based on Optoelectronic Oscillator With the Enhanced Vernier Effect

Simultaneous Measurement of Curvature Vector and Temperature Based on Composite Gratings Inscribed on D-Shaped Fiber

Hollow Core Bragg Fiber-Based Sensor for Simultaneous Measurement of Curvature and Temperature

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

Fiber Bragg grating temperature sensor for marine application

Multi-Core Fiber Bragg Grating and Its Sensing Application

Investigation on Sensing Characteristics of Fiber Bragg Gratings Based on Soft Glass Fibers

Optical Fiber Sensor for Curvature and Temperature Measurement Based on Anti-Resonant Effect Cascaded with Multimode Interference

High-order fiber Bragg grating fabricated by femtosecond laser pulses for high-sensitivity temperature and strain sensing

Research on sensitive characteristics of tilted fiber grating sensors

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Femtosecond Laser Inscription of Fiber Bragg Grating in Twin-Core Few-Mode Fiber for Directional Bend Sensing

Hybrid Fiber-Optic Sensing Integrating Brillouin Optical Time-Domain Analysis and Fiber Bragg Grating for Long-Range Two-Parameter Measurement

An OTDR and Gratings Assisted Multifunctional Fiber Sensing System

Simultaneous Strain and Temperature Measurements with Fiber Bragg Grating Written in Novel Hi-Bi Optical Fiber