Abstract:High-entropy alloys (HEAs) are considered alternatives to traditional structural materials because of their superior mechanical, physical, and chemical properties. However, alloy composition combinations are too numerous to explore. Finding a rapid synthesis method to accelerate the development of HEA bulks is imperative. Existing in situ synthesis methods based on additive manufacturing are insufficient for efficiently controlling the uniformity and accuracy of components. In this work, laser powder bed fusion (L-PBF) is adopted for the in situ synthesis of equiatomic CoCrFeMnNi HEA from elemental powder mixtures. High composition accuracy is achieved in parallel with ensuring internal density. The L-PBF-based process parameters are optimized; and two different methods, namely, a multi-melting process and homogenization heat treatment, are adopted to address the problem of incompletely melted Cr particles in the single-melted samples. X-ray diffraction indicates that HEA microstructure can be obtained from elemental powders via L-PBF. In the triple-melted samples, a strong crystallographic texture can be observed through electron backscatter diffraction, with a maximum polar density of 9.92 and a high ultimate tensile strength (UTS) of (735.3 ± 14.1) MPa. The homogenization heat-treated samples appear more like coarse equiaxed grains, with a UTS of (650.8 ± 16.1) MPa and an elongation of (40.2% ± 1.3%). Cellular substructures are also observed in the triple-melted samples, but not in the homogenization heat-treated samples. The differences in mechanical properties primarily originate from the changes in strengthening mechanism. The even and flat fractographic morphologies of the homogenization heat-treated samples represent a more uniform internal microstructure that is different from the complex morphologies of the triple-melted samples. Relative to the multi-melted samples, the homogenization heat-treated samples exhibit better processability, with a smaller composition deviation, i.e., ⩽ 0.32 at.%. The two methods presented in this study are expected to have considerable potential for developing HEAs with high composition accuracy and composition flexibility.

Fast and High‐Throughput Synthesis of Medium‐ and High‐Entropy Alloys Using Radio Frequency Inductively Coupled Plasma

In-situ High Throughput Synthesis of High-Entropy Alloys

Rapid in situ alloying of CoCrFeMnNi high-entropy alloy from elemental feedstock toward high-throughput synthesis via laser powder bed fusion

A new method of preparing high-performance high-entropy alloys through high-gravity combustion synthesis

Continuous synthesis of high-entropy alloy nanoparticles by in-flight alloying of elemental metals

Thermodynamics‐Guided High‐Throughput Discovery of Eutectic High‐Entropy Alloys for Rapid Solidification

Aerosol Synthesis of High Entropy Alloy Nanoparticles

High-throughput design of high-performance lightweight high-entropy alloys

Laser Powder Bed Fusion Processing of Low Cost CoCrFeNiMoxNby High Entropy Alloys with Promising High-Temperature Properties via In Situ Alloying Commercial Powders

Liquid metal for high-entropy alloy nanoparticles synthesis

Rapid alloy design from superior eutectic high-entropy alloys

Synthesis and Unique Behaviors of High-Purity HEA Nanoparticles Using Femtosecond Laser Ablation

Microstructure Design of High-Entropy Alloys Through a Multistage Mechanical Alloying Strategy for Temperature-Stable Megahertz Electromagnetic Absorption

High Throughput Discovery and Design of Strong Multicomponent Metallic Solid Solutions

Natural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility

High‐Entropy Alloy Array via Liquid Metal Nanoreactor

A novel and sustainable method to develop non-equiatomic CoCrFeNiMox high entropy alloys via spark plasma sintering using commercial commodity powders and evaluation of its mechanical behaviour

Sparking mashups to form multifunctional alloy nanoparticles

Recent advances in the synthesis and fabrication methods of high-entropy alloy nanoparticles

Triple-wire plasma-arc additive manufacturing of Al x -Cr-Fe-Ni medium-entropy alloys: Microstructure and mechanical properties

A high-throughput strategy for rapid synthesis and characterization of Ni-based superalloys