Abstract:The consistent expansion of the lithium-ion battery (LIB) market, coupled with their relatively brief lifespan, necessitates the development of efficient and sustainable LIB recycling strategies. Recycling is crucial not only for the recovery of critical metals like Co(II) and Li(I) from the cathode material as a secondary resource but also from an environmental perspective. This study explores the use of a series of aqueous biphasic systems (ABS) with synthesized tetrabutylphosphonium ionic liquids (ILs) and ammonium sulfate as extraction platforms for metals from LIB cathode. Firstly, liquid–liquid equilibrium phase diagrams for each ABS were established, and partitioning experiments were conducted to assess the Co(II), Ni(II), Mn(II), and Li(I) recovery efficiencies. We observed distinct partitioning behaviors for the metals, with tetrabutylphosphonium diethylenetriaminepentaacetate, [TBP][DTPA], showing recovery efficiencies exceeding 98% for Co(II), Ni(II), and Mn(II). At the same time, Li(I) was predominantly retained in the aqueous salt-rich phase. By fine-tuning ABS operational parameters such as pH, temperature, system composition, and phase ratio, we identified optimal conditions for extracting metals from the cathode material of lithium-cobalt-oxide (LCO) batteries using sulfate lixiviate. Introducing [TBP][DTPA] after the leaching process induced ABS, achieving remarkable recovery efficiency over 95% for Co(II) in the IL-rich phase, with all Li(I) remaining in the lower phase. Cobalt was subsequently extracted using oxalic acid to precipitate as Co-oxalate from concentrate, while Li(I) was isolated from the aqueous phase using ammonium carbonate. After the "cleaning" of the IL-rich phase, the [TBP][DTPA] was recovered and reused in four consecutive cycles, with small detected losses on the recovery efficiency of Co(II) and Li(I). Therefore, our innovative strategy combines sulfate-based lixiviants with IL-ABS technology, thereby enhancing selectivity and sustainability within one of the most efficient lixiviant systems widely employed in the industry. This technological advancement presents a promising pathway for the recycling of spent batteries, offering substantial environmental advantages within the well-established and extensively utilized realm of metal recovery technology in the industry.

Thiocarbamoyl Sulfamic Acid‐Derived Meso‐Porous Silica: A Comprehensive Study on Selective Adsorption of Cobalt and Lithium from Spent Lithium‐Ion Batteries

Eco-Friendly Recycling of Lithium Batteries for Extraction of High-Purity Metals

Efficient recovery of lithium as Li2CO3 and cobalt as Co3O4 from spent lithium-ion batteries after leaching with p-toluene sulfonic acid

Sustainable recovery of cobalt and lithium from lithium-ion battery cathode material by combining sulfate leachates and aqueous biphasic systems based on tetrabutylphosphonium-ionic liquids

Recycling for Recovery of Critical Metals from LiCoO2 Cathode Material Through Methanesulfonic Acid-Citric Acid Organic Leaching System

Recovery of cobalt from spent lithium ion batteries using sulphuric acid leaching followed by solid–liquid separation and solvent extraction

Novel Approach to Recover Cobalt and Lithium from Spent Lithium-Ion Battery Using Oxalic Acid.

Improving the sorption properties of mesoporous carbons for the removal of cobalt, nickel and manganese from spent lithium-ion batteries effluent

Efficient separation and recovery of cobalt(II) and lithium(I) from spent lithium ion batteries (LIBs) by polymer inclusion membrane electrodialysis (PIMED)

Amino Acid Leaching of Critical Metals from Spent Lithium-Ion Batteries Followed by Selective Recovery of Cobalt Using Aqueous Biphasic System

Effective leaching of spent lithium-ion batteries using DL-lactic acid as lixiviant and selective separation of metals through precipitation and solvent extraction

Succinic Acid-Based Leaching System: A Sustainable Process for Recovery of Valuable Metals from Spent Li-ion Batteries

Electrochemical Properties and the Adsorption of Lithium Ions in the Brine of Lithium-Ion Sieves Prepared from Spent Lithium Iron Phosphate Batteries

Toward Sustainable Li-Ion Batteries Recycling: Green MOF as a Molecular Sieve for the Selective Separation of Cobalt and Nickel

Synthesis and Recyclability of Sheet-like Cobalt Carbonate Recovered from Spent Li-Ion Batteries Using a Simple Hydrometallurgy Process

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

Hollow self-floating microspheres capture cobalt (Co 2+ )/nickel (Ni 2+ ) ions from the acidic leachate of spent lithium-ion battery cathodes

Resource Recovery of Spent Lithium-Ion Battery Cathode Materials by a Supercritical Carbon Dioxide System

Green and Sustainable Recycling of Lithium-Ion Batteries Via an Ionic Liquid-Driven Cathode Reduction Method

Recovery of Lithium, Nickel, and Cobalt from Spent Lithium-Ion Battery Powders by Selective Ammonia Leaching and an Adsorption Separation System