Abstract:Demand for lithium-ion batteries (LIBs) has increased dramatically over the years due to the rapid market expansion of electric vehicles. However, many of the essential components of cathode materials, such as cobalt, nickel, manganese and lithium, are resource-limited and expensive[1]. Therefore, recycling of used LIB cathode materials is very important to conserve resources and the environment. Currently, the lithium secondary battery recycling technology mainly uses wet and dry smelting, but there is a disadvantage of high energy consumption due to the use of strong acid and the smelting process[2-3]. In this study, the cathode active material was separated from a pouch-type lithium secondary battery separated from a portable tablet that was over 10 years old and the chemical, structural, and electrochemical characteristics thereof were investigated. The cathode active materials were dismantled from a pouch-type LIB, which was removed from the tablet produced in 2011. The pouch cell was in a swelling state and the OCV was 0V due to internal short is expected. As a result of TGA analysis, the electrode composition was confirmed to be 92wt% of the cathode active material, 3wt% of the conductive agent, and 3wt% of the binder, respectively. The recovery rate of the active material is the best when a mixed solvent including NMP, heating, and ultrasonic, respectively. Through SEM and EDS analysis, copper metal due to dissolution of the negative electrode current collector was found on the surface of the positive electrode. As shown in Fig. 1, It can be seen that the positive electrode active material recovered using the composite solvent is a positive electrode active material that is a mixture of NCM active material and LMO active material. The XRD results shows a well layered structure and a Co 3 O 4 phase due to lithium deficiency. In order to examine the electrochemical characteristics of the recovered electrode, it was reassembled into a 2032 coin type cell and evaluated, and the discharge capacity of approximately 150mAh/g was recovered as shown in Fig. 2. The positive active material recovered according to the experimental results is estimated to be in a state of insufficient lithium, and a lithium compensation process is planned to be additionally performed in the future.

Recovering the Cathode Material Adhered to the Collector and Separator of Spent Lithium-Ion Batteries for Recycling Purposes

Removal of impurity metals as phosphates from Lithium-ion battery leachates

A Study on the Cathode Materials Recovery Process Using Various Wet Chemistry

Recycling Lithium-Ion Battery: Mechanical Separation of Mixed Cathode Active Materials

Experimental Study on Recycling of Spent Lithium-Ion Battery Cathode Materials

Separation and recovery of valuable metals from spent lithium-ion batteries via concentrated sulfuric acid leaching and regeneration of LiNi1/3Co1/3Mn1/3O2

Research for Electrochemical & Structural Properties of Recycling Cathode Materials for End of Life Lib

A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries

Reclaimed and Up-Cycled Cathodes for Lithium-Ion Batteries

Sorting, Characterization, Environmentally Friendly Recycling, and Reuse of Components from End‐of‐Life 18650 Li Ion Batteries

Recovery of Lithium and Heavy Non-Ferrous Metals from Spent Lithium-Ion Batteries

Innovative lithium-ion battery recycling: Sustainable process for recovery of critical materials from lithium-ion batteries

Recycling Spent Lithium Ion Batteries and Separation of Cathode Active Materials: Structural Stability, Morphology Regularity, and Waste Management

A promising method for recovery of graphite and cathode materials from spent lithium-ion batteries

Efficient recovery of Al foil and regeneration of cathode materials from spent lithium-ion batteries with methanol-citric acid

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Novel electrochemical process for recycling of valuable metals from spent lithium-ion batteries

Impurity removal with highly selective and efficient methods and the recycling of transition metals from spent lithium-ion batteries

Spent NCM Lithium-Ion Batteries: Potential Evaluation of Mechanical Pretreatment for Recycling

A novel three-step approach to separate cathode components for lithium-ion battery recycling