Abstract:Recycling is a potential solution to narrow the gap between the supply and demand of raw materials for lithium-ion batteries (LIBs). However, the efficient separation of the active components and their recovery from battery waste remains a challenge. This paper evaluates the influence of three potential routes for the liberation of LIB components (namely mechanical, thermomechanical, and electrohydraulic fragmentation) on the recovery of lithium metal oxides (LMOs) and spheroidized graphite particles using froth flotation. The products of the three liberation routes were characterized using SEM-based automated image analysis. It was found that the mechanical process enabled the delamination of active materials from the foils, which remained intact at coarser sizes along with the casing and separator. However, binder preservation hinders active material liberation, as indicated by their aggregation. The electrohydraulic fragmentation route resulted in liberated active materials with a minor impact on morphology. The coarse fractions thus produced consist of the electrode foils, casing, and separator. Notwithstanding, it has the disadvantage of forming heterogeneous agglomerates containing liberated active particles. This was attributed to the dissolution of the anode binder and its rehardening after drying, capturing previously liberated particles. Finally, the thermomechanical process showed a preferential liberation of individual anode active particles and thus was considered the preferred upstream route for flotation. However, the thermal treatment oxidized Al foils, rendering them brittle and resulting in their distribution in all size fractions. Among the three, the thermomechanical black mass showed the highest flotation selectivity due to the removal of the binder, resulting in a product recovery of 94.4% graphite in the overflow and 89.4% LMOs in the underflow product.

A novel three-step approach to separate cathode components for lithium-ion battery recycling

Precise separation of spent lithium-ion cells in water without discharging for recycling

The Recycling of Spent Lithium-Ion Batteries: Crucial Flotation for the Separation of Cathode and Anode Materials

Efficient separation of electrode active materials and current collector metal foils from spent lithium-ion batteries by green deep eutectic solvent

Easily recyclable lithium-ion batteries: Recycling-oriented cathode design using highly soluble LiFeMnPO<sub>4</sub> with a water-soluble binder

Green and non-destructive separation of cathode materials from aluminum foil in spent lithium-ion batteries

Lithium-Ion Battery Recycling─Influence of Recycling Processes on Component Liberation and Flotation Separation Efficiency

Recycling Lithium-Ion Battery: Mechanical Separation of Mixed Cathode Active Materials

Solvent-Based Electrode Recovery for Direct Recycling of Li-Ion Batteries

A novel method to recycle mixed cathode materials for lithium ion batteries

A promising method for recovery of graphite and cathode materials from spent lithium-ion batteries

A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries

A sustainable delamination method to completely separate spent cathode foils via biomass-derived gamma-valerolactone

Challenges in Recycling Spent Lithium‐Ion Batteries: Spotlight on Polyvinylidene Fluoride Removal

Ultra-fast Recovery of Cathode Materials from Spent LiFePO4 Lithium-Ion Batteries by Novel Electromagnetic Separation Technology

Concurrent recycling chemistry for cathode/anode in spent graphite/LiFePO4 batteries: Designing a unique cation/anion-co-workable dual-ion battery

Exploring a Green Route for Recycling Spent Lithium-Ion Batteries: Revealing and Solving Deep Screening Problem

Direct lithium extraction from spent batteries for efficient lithium recycling

(Invited) Enabling Direct Recycling of Lithium-ion Batteries Via Solvent-based Electrode Recovery

Recycling of LiFePO4 cathode materials from spent lithium-ion batteries through ultrasound-assisted Fenton reaction and lithium compensation

Easily recyclable lithium‐ion batteries: Recycling‐oriented cathode design using highly soluble LiFeMnPO4 with a water‐soluble binder