Abstract:The disposal of spent lithium-ion power batteries (LIBs) has become an important research topic owing to the booming market for electric vehicles. However, the recovery efficiency of the alkaline solution and organic solvent methods currently used to separate Al foil from cathode materials still has room for improvement. The insufficient separation of Al foil and complexity of the battery types present obstacles to the extraction of valuable metals using simple processes. In this study, an efficient approach is developed to separate the Al foil in mixed-type spent LIBs (M-LIBs), namely, LiNixCoyMnzO2 (NCM), LiFePO4 (LFP), and LiMn2O4 (LMO) LIBs, by controlled pyrolysis. Hundred percent of the Al foil was recovered at the temperature of 450 °C, holding time of 60 min, and heating rate of 10 °C/min. The purity of Al in the recovered foil was 99.41 %, 99.83 % and 99.92 %, and the recovery efficiency of the active cathode materials was 96.01 %, 99.80 % and 99.15 % for NCM, LFP and LMO, respectively, without the loss of active cathode materials. The obtained active cathode materials exhibited a favorable crystalline structure, and the average particle diameter was reduced from 300.497 to 24.316 μm with a smaller and looser morphology. The process could be well fitted with the Friedman differential equation, and the correlation coefficients were higher than 0.99. The efficient separation could be attributed to the complete rupture of long chain -(CH2CF2)-n bonds in the poly (vinylidene difluoride) (PVDF) binder, which resulted in the formation of HF, trifluorobenzene, alkanes, and gaseous single molecule CH2CF2. Therefore, this work potentially provides an alternative approach for the efficient separation of Al foil in M-LIBs, thereby simplifying the process and achieving lower cost, reduced loss of valuable metals, and higher recovery efficiency.

A sustainable delamination method to completely separate spent cathode foils via biomass-derived gamma-valerolactone

A sustainable delamination method to completely separate spent cathode foils <i>via</i> biomass-derived γ-valerolactone

Green and non-destructive separation of cathode materials from aluminum foil in spent lithium-ion batteries

Efficient separation of electrode active materials and current collector metal foils from spent lithium-ion batteries by green deep eutectic solvent

Challenges in Recycling Spent Lithium‐Ion Batteries: Spotlight on Polyvinylidene Fluoride Removal

A novel three-step approach to separate cathode components for lithium-ion battery recycling

Decomposition of PVDF to delaminate cathode materials from end-of-life lithium-ion battery cathodes

A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries

Efficient Separation of Aluminum Foil and Cathode Materials from Spent Lithium-Ion Batteries Using a Low-Temperature Molten Salt

Innovative application of ionic liquid to separate Al and cathode materials from spent high-power lithium-ion batteries

Recycling of LiFePO4 cathode materials from spent lithium-ion batteries through ultrasound-assisted Fenton reaction and lithium compensation

Polyvinylidene Fluoride Binder Removal Through Subcritical Methanol for Efficient Liberation of Cathode Materials from Lithium-Ion Batteries

Resource Recovery of Spent Lithium-Ion Battery Cathode Materials by a Supercritical Carbon Dioxide System

Novel strategy towards in-situ recycling of valuable metals from spent lithium-ion batteries through endogenous advanced oxidation process

Ultra-fast recovery of cathode materials from spent LiFePO 4 lithium-ion batteries by novel electromagnetic separation technology

Selective Recovery of Cathode Materials from Spent Lithium-Ion Battery Material with a Near-Room-Temperature Separation

A Low-Toxicity and High-Efficiency Deep Eutectic Solvent for the Separation of Aluminum Foil and Cathode Materials from Spent Lithium-Ion Batteries.

Sorting, Characterization, Environmentally Friendly Recycling, and Reuse of Components from End‐of‐Life 18650 Li Ion Batteries

Degradation of cathode in air and its influences on direct recycling

Efficient separation of aluminum foil from mixed-type spent lithium-ion power batteries

The Recycling of Spent Lithium-Ion Batteries: Crucial Flotation for the Separation of Cathode and Anode Materials