Abstract:The disposal of spent lithium-ion power batteries (LIBs) has become an important research topic owing to the booming market for electric vehicles. However, the recovery efficiency of the alkaline solution and organic solvent methods currently used to separate Al foil from cathode materials still has room for improvement. The insufficient separation of Al foil and complexity of the battery types present obstacles to the extraction of valuable metals using simple processes. In this study, an efficient approach is developed to separate the Al foil in mixed-type spent LIBs (M-LIBs), namely, LiNixCoyMnzO2 (NCM), LiFePO4 (LFP), and LiMn2O4 (LMO) LIBs, by controlled pyrolysis. Hundred percent of the Al foil was recovered at the temperature of 450 °C, holding time of 60 min, and heating rate of 10 °C/min. The purity of Al in the recovered foil was 99.41 %, 99.83 % and 99.92 %, and the recovery efficiency of the active cathode materials was 96.01 %, 99.80 % and 99.15 % for NCM, LFP and LMO, respectively, without the loss of active cathode materials. The obtained active cathode materials exhibited a favorable crystalline structure, and the average particle diameter was reduced from 300.497 to 24.316 μm with a smaller and looser morphology. The process could be well fitted with the Friedman differential equation, and the correlation coefficients were higher than 0.99. The efficient separation could be attributed to the complete rupture of long chain -(CH2CF2)-n bonds in the poly (vinylidene difluoride) (PVDF) binder, which resulted in the formation of HF, trifluorobenzene, alkanes, and gaseous single molecule CH2CF2. Therefore, this work potentially provides an alternative approach for the efficient separation of Al foil in M-LIBs, thereby simplifying the process and achieving lower cost, reduced loss of valuable metals, and higher recovery efficiency.

Efficient Separation of Aluminum Foil and Cathode Materials from Spent Lithium-Ion Batteries Using a Low-Temperature Molten Salt

Green and non-destructive separation of cathode materials from aluminum foil in spent lithium-ion batteries

A Low-Toxicity and High-Efficiency Deep Eutectic Solvent for the Separation of Aluminum Foil and Cathode Materials from Spent Lithium-Ion Batteries.

Innovative application of ionic liquid to separate Al and cathode materials from spent high-power lithium-ion batteries

Efficient separation of aluminum foil from mixed-type spent lithium-ion power batteries

Challenges in Recycling Spent Lithium‐Ion Batteries: Spotlight on Polyvinylidene Fluoride Removal

High separation efficiency of ternary cathode materials from spent lithium-ion batteries by ternary molten Li-salt method

Efficient recovery of Al foil and regeneration of cathode materials from spent lithium-ion batteries with methanol-citric acid

A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries

Efficient separation of electrode active materials and current collector metal foils from spent lithium-ion batteries by green deep eutectic solvent

Alkali-enhanced polyvinylidene fluoride cracking to deeply remove aluminum impurities for regeneration of battery-grade lithium iron phosphate

Polyvinylidene Fluoride Binder Removal Through Subcritical Methanol for Efficient Liberation of Cathode Materials from Lithium-Ion Batteries

A Facile, Environmentally Friendly, and Low-Temperature Approach for Decomposition of Polyvinylidene Fluoride from the Cathode Electrode of Spent Lithium-ion Batteries

A sustainable delamination method to completely separate spent cathode foils via biomass-derived gamma-valerolactone

Environment-friendly technology for recovering cathode materials from spent lithium iron phosphate batteries

Decomposition of PVDF to delaminate cathode materials from end-of-life lithium-ion battery cathodes

Separation of cathode particles and aluminum current foil in Lithium-Ion battery by high-voltage pulsed discharge Part I: Experimental investigation

Ultra-fast recovery of cathode materials from spent LiFePO 4 lithium-ion batteries by novel electromagnetic separation technology

Recovery of cathode materials from waste lithium iron phosphate batteries through ultralow temperature treatment and mechanical separation

A novel three-step approach to separate cathode components for lithium-ion battery recycling

Recovery of lithium salt from spent lithium‐ion battery by less polar solvent wash and water extraction