Abstract:Recycling is a potential solution to narrow the gap between the supply and demand of raw materials for lithium-ion batteries (LIBs). However, the efficient separation of the active components and their recovery from battery waste remains a challenge. This paper evaluates the influence of three potential routes for the liberation of LIB components (namely mechanical, thermomechanical, and electrohydraulic fragmentation) on the recovery of lithium metal oxides (LMOs) and spheroidized graphite particles using froth flotation. The products of the three liberation routes were characterized using SEM-based automated image analysis. It was found that the mechanical process enabled the delamination of active materials from the foils, which remained intact at coarser sizes along with the casing and separator. However, binder preservation hinders active material liberation, as indicated by their aggregation. The electrohydraulic fragmentation route resulted in liberated active materials with a minor impact on morphology. The coarse fractions thus produced consist of the electrode foils, casing, and separator. Notwithstanding, it has the disadvantage of forming heterogeneous agglomerates containing liberated active particles. This was attributed to the dissolution of the anode binder and its rehardening after drying, capturing previously liberated particles. Finally, the thermomechanical process showed a preferential liberation of individual anode active particles and thus was considered the preferred upstream route for flotation. However, the thermal treatment oxidized Al foils, rendering them brittle and resulting in their distribution in all size fractions. Among the three, the thermomechanical black mass showed the highest flotation selectivity due to the removal of the binder, resulting in a product recovery of 94.4% graphite in the overflow and 89.4% LMOs in the underflow product.

A critical review of current technologies for the liberation of electrode materials from foils in the recycling process of spent lithium-ion batteries

Advances and Challenges on Recycling the Electrode and Electrolyte Materials in Spent Lithium-Ion Batteries

Electrochemical technology to drive spent lithium-ion batteries (LIBs) recycling: recent progress, and prospects

A comprehensive review of emerging technologies for recycling spent lithium-ion batteries

Recent advance in attractive pyrometallurgical recovery of electrode materials in spent lithium ion batteries: a review

A review of new technologies for lithium-ion battery treatment

Progresses in Sustainable Recycling Technology of Spent Lithium‐Ion Batteries

Lithium-Ion Battery Recycling─Influence of Recycling Processes on Component Liberation and Flotation Separation Efficiency

A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries

Fundamentals of the recycling of spent lithium-ion batteries

Challenges in Recycling Spent Lithium‐Ion Batteries: Spotlight on Polyvinylidene Fluoride Removal

A Comprehensive Review of the Advancement in Recycling the Anode and Electrolyte from Spent Lithium Ion Batteries

Review on comprehensive recycling of spent lithium-ion batteries: A full component utilization process for green and sustainable production

Progress, challenges, and prospects of spent lithium-ion batteries recycling: A review

Comprehensive review and comparison on pretreatment of spent lithium-ion battery

Sustainable Recycling of Electrode Materials in Spent Li-Ion Batteries through Direct Regeneration Processes

The Recycling of Spent Lithium-Ion Batteries: Crucial Flotation for the Separation of Cathode and Anode Materials

Electrochemical methods contribute to the recycling and regeneration path of lithium-ion batteries

Review on processes and technologies for recovery of valuable metals from spent lithium-ion batteries

A novel three-step approach to separate cathode components for lithium-ion battery recycling

Recent advancements in hydrometallurgical recycling technologies of spent lithium-ion battery cathode materials