Abstract:The primary objective of this study is to fabricate an Al-12wt. % Si Alloy/ZrO2 composite using the Stir Casting technique, with a specific focus on assessing its performance, particularly in terms of wear characteristics. This research presents a unique approach by utilizing Al-12wt. % Si Alloy as the matrix material, aiming to develop tailored Al Alloy matrix composites suitable for applications requiring enhanced tribological properties. The composites are systematically manufactured with varying percentages of micro-sized ZrO2 reinforcements, specifically 0.5, 1, and 3wt. %. The incorporation of ZrO2 results in significant improvements in wear resistance, a critical attribute for Al-12wt. % Si Alloy-based composites. These composites find extensive utility across industries such as marine, aerospace, automotive, and the power sector, where they are indispensable for producing vital components like electrical sliding contacts, gears, bearings, bushes, pistons, piston rings, and clutches. Despite the availability of various promising reinforcement materials, researchers persistently explore novel combinations of matrices and reinforcements to tailor properties and enhance cost-effectiveness. ZrO2 has emerged as a notable reinforcement material in metal matrix composites, as evidenced by numerous research endeavours. The composites fabricated with ceramic reinforcement's exhibit enhanced tribological characteristics. The study observes that the wear rate decreases up to 3 wt. % of reinforcements, beyond which it increases due to reinforcement agglomeration. The optimal wear-resistant combination is found at 3 wt. % of ZrO2, attributed to robust micro-coring and interstitial metal-oxygen bonding facilitated by the Si content in the Al-12%Si matrix. The results are further optimized using Response Surface Methodology (RSM) techniques and validated using the ANOVA table to elucidate the behaviour of the composites under different operational conditions. The hardness results further ascertain the decrease in the wear rate due to the inclusion of ZrO2 reinforcements owing to micro coring and strengthening.

Wear and abrasion of cast Al-Alumina particle composites

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Corrosive Wear of Alumina Particles Reinforced Al–Si Alloy Composites

Importance of Al2TiO5 particle on the mechanical and wear performance of stir cast AA6061 composite using Central Composite Design

Effect of Si3N4 Ceramic Particulates on Mechanical, Thermal, Thermo-Mechanical and Sliding Wear Performance of AA2024 Alloy Composites

Abrasive wear of alumina fibre-reinforced aluminium

Microstructural Evolution, Tensile Failure, Fatigue Behavior and Wear Properties of Al2O3 Reinforced Al2014 Alloy T6 Heat Treated Metal Composites

Effect of reinforced aluminium alloy LM30 with pure ceramic particles to evaluate hardness and wear properties

Study of Wear Behavior on AA6061 Reinforced with Hybrid Ceramic Composites through Optimization

Wear and mechanical properties of surface hybrid metal matrix composites on Al–Si aluminum alloys fabricated by friction stir processing

Comparative analysis on high temperature tribological behaviour of additive manufactured and cast AlSi10Mg alloy

Enhancing microstructural, tribological and corrosion responses of Al–Zn–Mg–Cu alloy via nano-/micro-Al2O3 particulates

A comparison of the erosive wear performance of particle reinforced aluminum matrix composites

Effect of B4C and SiC nanoparticle reinforcement on the wear behavior and surface structure of aluminum (Al6063-T6) matrix composite

CHARACTERIZATION OF WEAR RATE OF Al-12WT. %Si ALLOY BASED MMC REINFORCED WITH ZrO2 PARTICULATES

A Study of Parameters Affecting Wear Resistance of Alumina and Yttria Stabilized Zirconia Composite Coatings on Al-6061 Substrate

PHYSICO-TRIBOLOGICAL ANND WEAR MECHANISM CHARACTERISTICS OF HYBRID REINFFORCED Al6063 MATRIX COMPOSITES

Mechanism of abrasive wear of Al-Si hypoeutectic alloycontaining 5 vol% fly ash

Influence of Particle Size on Microstructure and Sliding Wear Response of Fly Ash and Rice Husk Ash Reinforced Al6061 MMCs

Analysis of Wear Behaviour of AA5052 Alloy Composites by Addition Alumina with Zirconium Dioxide Using the Taguchi-Grey Relational Method

Abrasive wear behavior of SiC particulate reinforced AA5052 metal matrix composite