Abstract:Due to the increase in the amount of produced epoxy resin waste, it is desirable to recycle this material to reduce the burden on the environment. Despite many studies focusing on recovering fibers from composites, few studies have focused on recycling the resin itself. In this study, we developed a new approach for recycling the decomposed amine-cured epoxy resin as an amine curing agent. Following the decomposition of the epoxy resin in nitric acid, a nitrated and decomposed resin product was extracted from the nitric acid solution. The resulting extract was then hydrogenated to convert the nitro group into amino group, and the hydrogenated extract was incorporated into the epoxy resin by replacing a portion of the original curing agent. The obtained recycled resin exhibited a higher tensile strength and comparable tensile modulus compared to the virgin resin due to the presence of aromatic amino groups. Moreover, when 20 mass% of the curing agent was replaced with the hydrogenated extract, the recycled resin with the optimized formulation exhibited tensile strength comparable to that of the virgin one. This approach demonstrates a novel recycling method for creating a closed loop of amine-cured epoxy resins.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01737.Images of the nitric acid decomposition process and the dumbbell specimen; FD-MS chart of the extract, the residue, and the hydrogenated picric acid; figures showing the tensile strength and modulus of the E-recycled resin upon variation in the amount of added curing agent containing 20 mass% of the extract; and table listing Tg and the crosslinking density of the E-recycled resin upon variation in the amount of added curing agent containing 20 mass% of the extract (PDF)This article has not yet been cited by other publications.

Fiber and Monomer Recovery from an Amine-Cured Epoxy Composite Using Molten NaOH-KOH

Mechanism and Catalysis of Oxidative Degradation of Fiber-Reinforced Epoxy Composites

A rapid electrochemical method to recycle carbon fiber composites using methyl radicals

Environment-friendly recycling of CFRP composites via gentle solvent system at atmospheric pressure

Reversible Amidation Chemistry Enables Closed‐Loop Chemical Recycling of Carbon Fiber Reinforced Polymer Composites to Monomers and Fibers

Solvent-free Rapid Degradation of Epoxy Composites and Recycling Application of High Performance Carbon Fibers Through the Synergic Catalysis Effect of Molten Salts and Titanium Dioxide

Efficient recycling of carbon fibers from amine-cured CFRP composites under facile condition

An Efficient Method of Recycling of CFRP Waste Using Peracetic Acid

Chemical Recycling of Carbon Fiber Reinforced Epoxy Resin Composites via Selective Cleavage of the Carbon–Nitrogen Bond

Carbon Fiber Reinforced Thermoset Composite with Near 100% Recyclability

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Recyclable separation and recovery of carbon fibers from CFRP composites: Optimization and mechanism

New Approach to Recycling of Epoxy Resins Using Nitric Acid: Regeneration of Decomposed Products through Hydrogenation

Epoxy‐Based Carbon Fiber‐Reinforced Plastics Recycling via Solvolysis with Non‐Oxidizing Methanesulfonic Acid

Oxidative chemical depolymerization of thermoset epoxy resin for green recycling

Recycling of carbon/epoxy composites

An imine-containing epoxy vitrimer with versatile recyclability and its application in fully recyclable carbon fiber reinforced composites

Research on Depolymerisation and Regeneration of Epoxy Resin Cured with Anhydrides

Fast chemical recycling of carbon fiber reinforced plastic at ambient pressure using an aqueous solvent accelerated by a surfactant

Study on Degradation Mechanism of Carbon Fiber-reinforced Anhydride-cured Resin-based Matrix Composites by a Benzyl Alcohol/NaOH System