Abstract:In recent years, with the increasing demand for carbon fiber-reinforced polymer (CFRP), the recycling of its waste has become a serious problem that restricts the wider application of CFRP. This study used a benzyl alcohol/NaOH system at atmospheric pressure to degrade the CFRP of epoxy-resin matrix cured by anhydride, and the influence of NaOH dosage on degradation rate was investigated. The degradation mechanism of the resin was analyzed using Fourier transform infrared spectroscopy, gas chromatography-mass spectrometry and Electro-Spray Ionization-Mass Spectroscopy. The structure and properties of the recycled carbon fibers were characterized using scanning electron microscopy, X-ray photoelectron spectroscopy and a monofilament tensile strength test. The experimental results indicated that the benzyloxy nucleophilic group produced by benzyl alcohol in alkaline conditions selectively attacked the cross-linking ester bond of the resin and broke the cross-linking point. Finally, the resin was degraded by removing the curing agent. When the mass ratio of NaOH to CFRP (w (NaoH) :w (CFRP) ) was not under 1:1 and the reaction conditions were 190 °C, 1 h and atmospheric pressure, the degradation rate of the resin reached 98.4 %. The degradation products of the resin were insoluble in benzyl alcohol and precipitated, which was conducive to the recovery and reuse of the benzyl alcohol. The surface oxygen content of the recycled carbon fiber was similar to that of the original carbon fiber, and the tensile strength of recycled carbon fiber monofilament remained above 95 % of the original.

Chemical Recycling of Carbon Fiber Reinforced Epoxy Resin Composites via Selective Cleavage of the Carbon–Nitrogen Bond

Recycling of Carbon Fiber-reinforced Epoxy Resin-based Composites Using a Benzyl Alcohol/Alkaline System

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Environment-friendly recycling of CFRP composites via gentle solvent system at atmospheric pressure

Progress in Chemical Recycling of Carbon Fiber Reinforced Epoxy Composites

Efficient recycling of carbon fibers from amine-cured CFRP composites under facile condition

A Novel Approach on Recycling Short-Chopped Carbon Fibers by Electric Field Induced Manipulation

High-quality Electrostatic Recycling of Waste Carbon Fiber Via Spark-Driven Shock Waves and Joule Heating

Review of chemical recycling and reuse of carbon fiber reinforced epoxy resin composites

Chemical Recycling of CFRP in an Environmentally Friendly Approach

An Efficient Method of Recycling of CFRP Waste Using Peracetic Acid

Mechanism and Catalysis of Oxidative Degradation of Fiber-Reinforced Epoxy Composites

Recyclable separation and recovery of carbon fibers from CFRP composites: Optimization and mechanism

Epoxy‐Based Carbon Fiber‐Reinforced Plastics Recycling via Solvolysis with Non‐Oxidizing Methanesulfonic Acid

High‐performance, semi‐bio‐based degradable epoxy resins and its application to recyclable carbon fiber composites

Reversible Amidation Chemistry Enables Closed‐Loop Chemical Recycling of Carbon Fiber Reinforced Polymer Composites to Monomers and Fibers

Study on Degradation Mechanism of Carbon Fiber-reinforced Anhydride-cured Resin-based Matrix Composites by a Benzyl Alcohol/NaOH System

Fast chemical recycling of carbon fiber reinforced plastic at ambient pressure using an aqueous solvent accelerated by a surfactant

Composite Recycling with Biocatalytic Thermoset Reforming

A rapid electrochemical method to recycle carbon fiber composites using methyl radicals