Abstract:Multiple remanufacturing methods for recycled carbon fiber reinforced composites. Considering the types of carbon fiber reinforced polymer (CFRP) waste and the length of recycled carbon fiber (rCF), it is still a challenge to obtain high‐performance rCF and realize its high‐value reuse. In this paper, rCF was obtained by the thermal activated oxide semiconductor, and the effects of temperature and time on the resin decomposition rate of CFRP with different resin systems were analyzed. Three remanufacturing processes, namely wet fiber alignment (WFA), direct ink writing (DIW) and fused deposition modeling (FDM), were used to remanufacture rCF in millimeter and micron scale into recycled carbon fiber reinforced polymer (rCFRP) and the effects of rCF content on the mechanical properties of rCFRP were studied. The results showed that the optimal recycling parameter for EP‐EDA is 520°C, 45 min, and for EP‐MeTHPA and phenolic resin, the optimal recycling parameter is 520°C, 35 min. With the increase of rCF content, the tensile strength and modulus of WFA, DIW and FDM samples all increased to varying degrees. When the rCF content is 15 wt%, the tensile strength of WFA, DIW and FDM samples is increased by 355.6%, 68.4%, and 34.5%, respectively, compared with the corresponding pure resin samples. The mechanical properties of WFA, DIW and FDM samples are greatly different due to the rCF content, rCF length, interface bonding and alignment of rCF. This paper emphasizes the important effects of remanufacturing process, material composition and rCF content on the properties of rCFRP, and provides multiple ways for high‐value reuse of rCF. Highlights rCF obtained by thermal activated oxide semiconductor. Resin decomposition rate of CFRP waste with different resin systems. Multiple remanufacturing processes for rCF. Effects of rCF content and material composition on the properties of rCFRP.

Study on Degradation Mechanism of Carbon Fiber-reinforced Anhydride-cured Resin-based Matrix Composites by a Benzyl Alcohol/NaOH System

Recycling of Carbon Fiber-reinforced Epoxy Resin-based Composites Using a Benzyl Alcohol/Alkaline System

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Efficient recycling of carbon fibers from amine-cured CFRP composites under facile condition

Environment-friendly recycling of CFRP composites via gentle solvent system at atmospheric pressure

High-Strength, Degradable and Recyclable Epoxy Resin Based on Imine Bonds for Its Carbon-Fiber-Reinforced Composites

High‐performance, semi‐bio‐based degradable epoxy resins and its application to recyclable carbon fiber composites

High-Efficiency Carbon Fiber Recovery Method and Characterization of Carbon FIBER-Reinforced Epoxy/4,4′-Diaminodiphenyl Sulfone Composites

Simple and Mild Method for the Recycling of Carbon-Fiber-Reinforced Bismaleimide Resin Composite Waste

Chemical Recycling of Carbon Fiber Reinforced Epoxy Resin Composites via Selective Cleavage of the Carbon–Nitrogen Bond

Research on a two-step pyrolysis-oxidation process of carbon fiber-reinforced epoxy resin-based composites and analysis of product properties

An Efficient Method of Recycling of CFRP Waste Using Peracetic Acid

Study on Recycling Carbon Fibers from Carbon Fiber Reinforced Polymer Waste by Microwave Molten Salt Pyrolysis

A mild and efficient oxidative degradation system of epoxy thermosets: full recovery and degradation mechanism

Fast chemical recycling of carbon fiber reinforced plastic at ambient pressure using an aqueous solvent accelerated by a surfactant

Progress in Chemical Recycling of Carbon Fiber Reinforced Epoxy Composites

Degradable benzyl cyclic acetal epoxy monomers with low viscosity: Synthesis, structure-property relationships, application in recyclable carbon fiber composite

Chemical degradation of carbon fiber reinforced bismaleimide resin composites to recover carbon fiber and nitrogen doped carbon materials

Performance analysis of recycled carbon fiber under recycling process parameters optimized using response surface methodology

Study on recycled carbon fiber obtained by thermal activated oxide semiconductor and mechanical properties of its reinforced polymer composites

Recycling Benzoxazine–Epoxy Composites via Catalytic Oxidation