Abstract:In this study, recycled carbon fibers (rCF) obtained from pyrolysis are utilized as reinforcements in fly ash-GGBS alkali-activated composites. Since the bond between the fiber and matrix is relatively poor, anodic oxidation was conducted by applying various voltages to enhance the interfacial interactions. Cyclic voltammetry (CV) was performed to investigate the chemical reaction process during the electrochemical fiber modification. Scanning electron microscopy showed the removal of contaminations and impurities from the fiber surfaces by anodization. Thermogravimetric analysis (TGA) analysis was performed to compare the heat resistance properties of the CF reinforced composites and single-fiber tension tests were carried out to evaluate the influence of the electrochemical treatment on the fiber's properties. Single fiber pullout tests and energy dispersive X-ray mapping indicated a remarkable improvement of compatibility between the modified fibers and the matrix, since chemical bonds are formed between oxygen-related functional groups from the anodized fiber surfaces and the alkaliactivated matrix. With the addition of 1 wt.% rCFs compressive and flexural strengths have been enhanced by up to 25% and 19%, respectively, compared to the plain composites. The results reveal that electrochemical surface treatment of rCFs is beneficial for enhancing the flexural behavior of rCF-reinforced composite owing to enhanced interfacial bonding. However, this method also provokes a slight increase of porosity compared with untreated fiber-reinforced samples, as proved by mercury intrusion porosimetry (MIP). This study provides a promising utilization of rCF in the production of waste-based fiber-reinforced alkali-activated composites, promoting the management of carbon fiber-reinforced plastic waste.

A rapid electrochemical method to recycle carbon fiber composites using methyl radicals

A Novel Approach on Recycling Short-Chopped Carbon Fibers by Electric Field Induced Manipulation

High-quality Electrostatic Recycling of Waste Carbon Fiber Via Spark-Driven Shock Waves and Joule Heating

Fiber and Monomer Recovery from an Amine-Cured Epoxy Composite Using Molten NaOH-KOH

Mechanism and Catalysis of Oxidative Degradation of Fiber-Reinforced Epoxy Composites

Chemical Recycling of Carbon Fiber Reinforced Epoxy Resin Composites via Selective Cleavage of the Carbon–Nitrogen Bond

Solvent-free Rapid Degradation of Epoxy Composites and Recycling Application of High Performance Carbon Fibers Through the Synergic Catalysis Effect of Molten Salts and Titanium Dioxide

An Efficient Method of Recycling of CFRP Waste Using Peracetic Acid

Epoxy‐Based Carbon Fiber‐Reinforced Plastics Recycling via Solvolysis with Non‐Oxidizing Methanesulfonic Acid

Recycling Benzoxazine–Epoxy Composites via Catalytic Oxidation

Environment-friendly recycling of CFRP composites via gentle solvent system at atmospheric pressure

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Efficient method of recycling carbon fiber from the waste of carbon fiber reinforced polymer composites

Efficient recycling of carbon fibers from amine-cured CFRP composites under facile condition

Fast chemical recycling of carbon fiber reinforced plastic at ambient pressure using an aqueous solvent accelerated by a surfactant

Electrochemical Oxidation of Recycled Carbon Fibers for an Improved Interaction Toward Alkali-Activated Composites

Composite Recycling with Biocatalytic Thermoset Reforming

Reversible Amidation Chemistry Enables Closed‐Loop Chemical Recycling of Carbon Fiber Reinforced Polymer Composites to Monomers and Fibers

An imine-containing epoxy vitrimer with versatile recyclability and its application in fully recyclable carbon fiber reinforced composites

Recyclable separation and recovery of carbon fibers from CFRP composites: Optimization and mechanism