Abstract:Shear experiments were conducted on the cement mortar–sandstone bonding interface and the materials themselves to investigate their loss of shear strength and the deterioration mechanism caused by freezing and thawing cycles. The experimental results show that the shear strength of the bonding interface is much lower than that of the original materials themselves under the same normal stress. The shear strength of this interface decreases linearly with increasing number of freeze–thaw cycles, but it linearly increases with increasing normal stress. The cohesion and internal friction angle also decrease as the number of freeze–thaw cycles increases. In addition, obvious freeze–thaw debonding of this interface is observed and it is first caused by the difference in frost-heaving deformation between the cement mortar and the red sandstone, followed by the frost-heaving pressure in the crack formed in the interface. Finally, the shear damage of this interface has been quantified by reconstitution of the interface morphology. As a result, almost all the shear breakage occurs on the red sandstone side, and a concave rough face arises. With the absence of normal stress, the shear abscission area in the red sandstone increases quickly with increasing number of freeze–thaw cycles. However, with increasing normal stress, this shear abscission area decreases, and the layered composite specimens were prone to shear failure straightly along the bonding interface, because the shear dilatancy deformation is constrained. This study provides the shear failure characteristics of cement mortar–rock interfaces under freeze–thaw cycles and contributes to a better understanding of the freeze–thaw debonding mechanism of protective cement mortar layers on rock surfaces.

Investigating the Strength and Microstructure of Cemented Sand–Gravel Mixtures Subjected to Freeze–Thaw Cycles

Influence of Freeze–Thaw Cycles on Physical and Mechanical Properties of Cement-Treated Silty Sand

Effect of Freeze-Thaw Cycles on Triaxial Strength Property Damage to Cement Improved Aeolian Sand (CIAS)

Deterioration Index Analysis of Cemented Sand and Gravel Materials under Freeze–Thaw Action

Investigating Mechanical Properties of Cemented Soil under Static and Dynamic Loading after a Freeze-Thaw Cycle

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Effect of freeze-thaw cycles on mechanical behavior of clay-gravel mixtures

Experimental Study on the Shear Behavior of the Bonding Interface Between Sandstone and Cement Mortar Under Freeze–Thaw

Influence Of Emulsified Asphalt On The Mechanical Property And Microstructure Of Cement-Stabilized Gravel Under Freezing And Thawing Cycle Conditions

Microscopic Mechanism of the Macroscopic Mechanical Properties of Cement Modified Subgrade Silty Soil Subjected to Freeze-Thaw Cycles

Effects of Freeze–thaw Cycles and Porosity/cement index on Durability, Strength and Capillary Rise of a Stabilized Silty Soil Under Optimal Compaction Conditions

Study on pore structure and the mechanical properties of sandstone-concrete binary under freeze-thaw environment

Mechanical properties and acoustic emission characteristics of basalt fiber reinforced cemented silty sand subjected to freeze–thaw cycles

Influence of Mixture Compositions on Impact Resistance and Mechanical Properties of Concrete Cured in Cold Temperature Conditions

Experimental Study on the Shear Strength of Fine Sand Reinforced by Grouting and Freezing

Experimental Investigation on Fracture Behavior and Mechanical Properties of Red Sandstone Subjected to Freeze–Thaw Cycles

Shear behavior of cement-stabilized silty clay exposed to low-temperature curing

Investigation on the Failure Behavior of Engineered Cementitious Composites under Freeze-Thaw Cycles

Dynamic Strength Characteristics of Cement-Improved Silty Clay under the Effect of Freeze-Thaw Cycles

Behavior of Air-Entrained Concrete after Freeze-Thaw Cycles

Experimental and DEM simulations of the mechanical properties of rock under freeze–thaw cycles