Abstract:The freezing and thawing cycle is one of the primary causes of damage and instability to buildings in seasonal frost regions. During this process, the mechanical properties of soil are affected, leading to settlement, cracking, or deformation of infrastructure. Mitigating or reducing the occurrence of building frost damage in seasonal frost regions has become an important subject of study. Freeze–thaw (F–T) action will influence the distribution of moisture inside the reinforced soil and change the strength of thawing soil, which is closely related to the main influencing factors, such as initial moisture content, compaction degree, reinforced spacing, number of freeze–thaw cycles (FTC), freezing temperature, and effective vertical stress. Cohesion is an important index to determine the shear strength of clay, which is important to analyze the change in cohesion after F–T. Meanwhile, cohesion is closely related to soil moisture content. This study conducted orthogonal experiments on these primary influencing factors (6 factors at 5 levels) through FTC tests, triaxial tests, and moisture content tests to determine the undrained cohesion and moisture content of the clay after FTC, thereby establishing the influence of reinforcement on soil strength under freeze–thaw conditions. Based on the experimental results, SPSS software was used to fit the regression equations of undrained cohesion and moisture content expressed by the main influencing factors at different heights of the clay. Optimization options for the main influencing factors were obtained with Matlab software when the highest undrained cohesion values 6.8, 10.6, 8.9 kPa and lowest moisture content values 24.0%, 24.3%, 26.2% appeared in upper, middle and lower parts of the testing clay structure respectively, in conditions of − 15 °C freezing temperature and 5 times FTC. And determined the optimal combinations of moisture content, reinforcement spacing, compaction density, and vertical load at different heights. Decreasing reinforced spacing in silty clay was beneficial for liquid underwater seepage after F–T. The redistribution of internal moisture in the soil sample strengthened its undrained cohesion, thereby increasing the soil's shear strength. Comparing reinforcement conditions at different locations, it was found that when there were 3 layers of reinforcement with a spacing of 150 mm between them, this spacing was optimal. It played a significant role in improving the soil's shear strength and enhancing its bearing capacity. For reinforced clay itself, the order of the main factors influencing the undrained cohesion of soil after F–T, from high to low, was initial moisture content, reinforced spacing, and compaction degree.

Effects of Freeze–thaw Cycles and Porosity/cement index on Durability, Strength and Capillary Rise of a Stabilized Silty Soil Under Optimal Compaction Conditions

Influence of Freeze–Thaw Cycles on Physical and Mechanical Properties of Cement-Treated Silty Sand

Effect of freeze-thaw cycles on static properties of cement stabilised subgrade silty soil

Experimental study on the strength, collapsibility, and microstructure of cement and micro-silica-stabilized saline soil under freeze-thaw cycles

Microscopic Mechanism of the Macroscopic Mechanical Properties of Cement Modified Subgrade Silty Soil Subjected to Freeze-Thaw Cycles

Durability Evaluation of Clayey Sandy Soil Stabilized with Copper-Slag-Based Geopolymer Under Freezing–Thawing Cycles

Study of Geotechnical Characteristics of Frost-affected Soil Stabilized with Cement and Wood Ash

Durability and Swelling of Solidified/Stabilized Dredged Marine Soils with Class-F Fly Ash, Cement, and Lime

Analysis of Novel Porosity–Water-to-Binder Index for Prediction of Strength, Stiffness and Durability for Cemented Soils

Mechanical characteristics and microstructure study of saline soil stabilized by quicklime after curing and freeze-thaw cycle

Experimental study on the effect of freeze–thaw cycles to the cohesion and moisture content of geogrid reinforced silty clay

Mechanical performances and microstructural characteristics of reactive MgO-carbonated silt subjected to freezing-thawing cycles

Mechanical behaviors of warm and ice-rich frozen soil stabilized with sulphoaluminate cement

Mechanical properties and acoustic emission characteristics of basalt fiber reinforced cemented silty sand subjected to freeze–thaw cycles

Dynamic Strength Characteristics of Cement-Improved Silty Clay under the Effect of Freeze-Thaw Cycles

Influence of Drying on the Stiffness and Strength of Cement-Stabilized Soils

Laboratory Freeze–thaw Assessment of Cement, Fly Ash, and Fiber Stabilized Pavement Foundation Materials

Influence of the curing stress effect on the stiffness degradation curve of a silt stabilized with lime and cement

Deterioration characteristics of cement-improved loess under dry–wet and freeze–thaw cycles

Mechanical Properties and Constitutive Model of the Cement-Improved Loess under Freeze-Thaw Conditions

Effect of Freeze-Thaw Cycles on Triaxial Strength Property Damage to Cement Improved Aeolian Sand (CIAS)