Abstract:An effective method based on the synergy of Pb(SCN)2 and 2‐thiopheneethylammonium chloride to suppress phase segregation and non‐radiative recombination is proposed. Finally, the two‐terminal perovskite/organic tandem solar cells exhibit a high VOC of 2.072 V and a power conversion efficiency of 22.29%, and maintain 81% initial efficiencies after 1000 h maximum power point tracking. Wide bandgap (WBG) perovskites through tuning iodine/bromine ratios are capable of merging with narrow bandgap organic bulk heterojunctions to construct tandem solar cells to overcome the Shockley–Queisser limitation. However, WBG perovskites readily suffer from light‐induced halide ion migration, leading to detrimental phase segregation and hence severe open‐circuit voltage (VOC) loss. Here, to solve this issue, lead thiocyanate (Pb(SCN)2) and 2‐thiopheneethylammonium chloride (TEACl) are synergistically employed to passivate and stabilize WBG perovskites with 1.79 eV bandgap. It is demonstrated that the synergetic employment of Pb(SCN)2 and TEACl suppresses light‐induced phase segregation, passivates WBG perovskite defects, and reduces non‐radiative recombination, hence alleviating VOC loss. As a result, optimized WBG perovskite solar cells (PSCs) are obtained with an impressive VOC of 1.26 V and power conversion efficiency (PCE) over 17.0%. Furthermore, the interconnection layer is optimized to minimize the VOC loss and construct two‐terminal perovskite/organic tandem solar cells with a narrow bandgap organic blend bulk heterojunction of PM6:Y6 and achieve a champion PCE of 22.29% with a high VOC of 2.072 V. In addition, these tandem solar cells maintain 81% of their initial efficiency after 1000 h continuous tracking at the maximum power point (MPP) under 100 mW cm−2 white light illumination.

Minimized surface deficiency on wide-bandgap perovskite for efficient indoor photovoltaics

Minimizing Voltage Deficit in Perovskite Indoor Photovoltaics by Interfacial Engineering

Enhanced Efficiency and Stability of Wide‐Bandgap Perovskites via Br‐Rich Bulk and Surface 2D Passivation for Indoor Photovoltaics

Engineering the Non‐Radiative Recombination of Mixed‐Halide Perovskites with Optimal Bandgap for Indoor Photovoltaics

Wide-Gap Perovskite Via Synergetic Surface Passivation and Its Application Toward Efficient Stacked Tandem Photovoltaics.

Wide-band-gap perovskite solar minimodules exceeding 43% efficiency under indoor light illumination

Interfacial Engineering of Wide‐Bandgap Perovskites for Efficient Perovskite/CZTSSe Tandem Solar Cells

Low-Trap-Density CsPbX 3 Film for High-Efficiency Indoor Photovoltaics

Impermeable inorganic “walls” sandwiching perovskite layer toward inverted and indoor photovoltaic devices

In Situ Formation of 2d Perovskite Seeding for Record‐Efficiency Indoor Perovskite Photovoltaic Devices

Minimizing Voltage Losses via Synergistically Reducing Hetero-Interface Energy Offset for High Efficiency Perovskite Solar Cells

Low-Trap-Density CsPbX3 Film for High-Efficiency Indoor Photovoltaics.

Efficient Inverted Perovskite Solar Cells with Low Voltage Loss Achieved by a Pyridine‐Based Dopant‐Free Polymer Semiconductor

Efficient wide-bandgap perovskite solar cells with open-circuit voltage deficit below 0.4 V via hole-selective interface engineering

Minimizing Open-Circuit Voltage Deficit Via Interface Engineering for Highly Efficient CsPbI2Br Perovskite Solar Cells

Bipolar Pseudohalide Ammonium Salts Bridged Perovskite Buried Interface toward Efficient Indoor Photovoltaics

Suppressing Phase Segregation in Wide Bandgap Perovskites for Monolithic Perovskite/Organic Tandem Solar Cells with Reduced Voltage Loss

High Performance Wide Bandgap Perovskite Solar Cell with Low VOC Deficit Less Than 0.4 V

Wide‐Bandgap Perovskite Solar Cell Using a Fluoride‐Assisted Surface Gradient Passivation Strategy

Self‐Assembled Amphiphilic Monolayer for Efficient and Stable Wide‐Bandgap Perovskite Solar Cells

Suppressing Halide Segregation via Pyridine‐Derivative Isomers Enables Efficient 1.68‐eV Bandgap Perovskite Solar Cells