Abstract:The study reports the potential of Cs3Sb2ClxI9‐x‐based solar cell by fine‐tuning the absorber, ETL, HTL, transport/absorber interface, and metal contact under WLED, halogen, and CFL with different light intensities. The optimized device demonstrates a peak efficiency of 45.05%, and the proposed device with ZnO0.25S0.75 as ETL, Cu2O as HTL, and Pt as back contact achieved a promising PCE of 38.7%. Lead‐free Perovskite‐inspired materials (PIM) have become the most promising candidate for indoor photovoltaics (IPV) because of their low toxicity and high performance. In this study, the potential of one of the lead‐free PIMs, Cesium antimony chloride iodide (Cs3Sb2ClxI9‐x), is explored for IPV devices. Recent experimental research work on a Cs3Sb2ClxI9‐x− based solar cell with a power conversion efficiency (PCE) of 3.7% is considered for the baseline model development. The device performance is further optimized by investigating 1) absorber thickness and defect density, 2) band alignment of Electron Transport Layer (ETL)/Absorber, ETL Doping concentration and absorber/ETL interface defect density, 3) band alignment of Hole Transport Layer (HTL)/Absorber, HTL Doping concentration, and absorber/HTL interface defect density, 4) work function of metal contacts, 5) series and shunt resistances. After device optimization, the simulated device under 1000 lux WLED is able to achieve Jsc, Voc, FF, and PCE of 1.8 mA cm−2, 1.46 V, 89.3%, and 45.05%, respectively. Further, an evaluation of the performance of the optimized device under various indoor light sources, including White Light Emitting Diode (WLED), halogen, and Compact Fluorescent Lamp (CFL), is conducted in order to assess its performance under widely utilized lighting conditions.

Low-Trap-Density CsPbX 3 Film for High-Efficiency Indoor Photovoltaics

Low-Trap-Density CsPbX3 Film for High-Efficiency Indoor Photovoltaics.

Ion‐Dipole Interaction Enabling Highly Efficient CsPbI3 Perovskite Indoor Photovoltaics

Enhanced Efficiency and Stability of Wide‐Bandgap Perovskites via Br‐Rich Bulk and Surface 2D Passivation for Indoor Photovoltaics

Tailoring Triple‐Anion Perovskite Material for Indoor Light Harvesting with Restrained Halide Segregation and Record High Efficiency Beyond 36%

Performance analysis of CsPbI3-based solar cells under light emitting diode illumination as an energy harvester for IoT and indoor photovoltaics

Intermediate‐Adduct‐Assisted Growth of Stable CsPbI 2 Br Inorganic Perovskite Films for High‐Efficiency Semitransparent Solar Cells

Balancing bandgap and charge transport in triple-cation perovskite for efficient indoor photovoltaics

Computational modeling of Cs3Sb2I9-based novel architecture under WLED illumination for indoor photovoltaic applications

Unveiling the Potential of Cs3Sb2ClxI9‐x‐Based Solar Cells for Efficient Indoor Light Harvesting: Numerical Simulation

Mixed‐Halide Inorganic Perovskite Solar Cells: Opportunities and Challenges

Minimized surface deficiency on wide-bandgap perovskite for efficient indoor photovoltaics

Triple Halide Wide Bandgap Perovskites for Efficient Indoor Photovoltaics

Growing High-quality CsPbBr3 by Using Porous CsPb2Br5 as an Intermediate: A Promising Light Absorber in Carbon-based Perovskite Solar Cells

Low-dimensional/3D Heterostructure Boosts Efficiency and Stability of Carbon-Based CsPbI2Br Perovskite Solar Cells

In Situ Constructing Intermediate Energy‐Level Perovskite Transition Layer for 15.03% Efficiency HTL‐Free Carbon‐Based Perovskite Solar Cells with a High Fill Factor of 0.81

Tailoring Defects Regulation in Air-Fabricated CsPbI3 for Efficient Inverted All-Inorganic Perovskite Solar Cells with Voc of 1.225 V

Highly Efficient Semitransparent CsPbIBr2 Perovskite Solar Cells Via Low-Temperature Processed In2S3 As Electron-Transport-layer

High‐Efficiency Carbon‐Based CsPbIBr 2 Solar Cells with Interfacial Energy Loss Suppressed by a Thin Bulk‐Heterojunction Layer

In Situ Stabilized CsPbI<sub>3</sub> for Air-Fabricated Inverted Inorganic Perovskite Photovoltaics with Wide Humidity Operating Window

Hierarchically Manipulated Charge Recombination for Mitigating Energy Loss in CsPbI2Br Solar Cells.