Relaxation and 3d-2d passage with determinant type constraints: an outline

Omar Anza Hafsa,Jean-Philippe Mandallena

DOI: https://doi.org/10.48550/arXiv.0906.5262

2009-06-29

Analysis of PDEs

Abstract:We outline our work (see [1,2,3,4]) on relaxation and 3d-2d passage with determinant type constraints. Some open questions are addressed. This outline-paper comes as a companion to [5].

What problem does this paper attempt to address?

Form-Finding of Tensegrity Structures with Boundary Constraints Using Parallel Computation of Singular Value Decomposition

Xiaodong Feng,Shirong Huang,Can Chen,Yaozhi Luo,Sergio Zlotnik

DOI: https://doi.org/10.20944/preprints201906.0065.v1

2019-01-01

Abstract:A novel analysis method is presented for form-finding of tensegrity structures subjected to boundary constraints. Dummy members are introduced to free the fixed nodes as to transform the tensegrity structure with boundary constraints into free-standing self-stressed system without supports. The geometrical topology, the dimension of the structure and the element prototype are the only information that is required in the proposed form-finding process. Parallel computation of singular value decomposition of the force density matrix and the equilibrium matrix are performed iteratively to seek the feasible sets of nodal coordinates and force densities. A rigorous definition is given for the required rank deficiencies of the force density and equilibrium matrices that lead to a stable non-degenrate d-dimensional self-stresssed tensegrity structure. Several illustrative examples are presented to demonstrate the efficiency and robustness in searching self-equilibrium configurations of tensegrity structures subjected to boundary constraints.
Recent advances in configurations in spatial structures

Yao zhi Luo

DOI: https://doi.org/10.1504/IJSTRUCTE.2010.033490

2010-01-01

International Journal of Structural Engineering

Abstract:This paper presents a summary of the author's recent work on the configuration of spatial structures. To better satisfy architecture and engineering requirements, the paper introduces a technique of reconstructing freestyle 3D objects with grid space structures. With this technique, irregular and complex configurations can be easily modelled, which has a great potential in modelling of sculptures and bionic structures. Then several new types of deployable structures, which are based on linkage mechanisms including Bricard linkages and double chain linkages, are proposed. The kinetic behaviour of these deployable structures is investigated by geometrical analysis. And their possible applications in retractable roofs are also explored. Meanwhile, the paper proposes a practical application of structures with changeable configurations – a novelty erection technology based on expandable mechanisms. Finally, the paper presents some new advances in form-finding of tensegrity structures and shape control of tensegrity structures.
A Unifying Framework for Form-Finding and Topology-Finding of Tensegrity Structures

Yafeng Wang,Xian Xu,Yaozhi Luo

DOI: https://doi.org/10.1016/j.compstruc.2021.106486

IF: 5.372

2021-01-01

Computers & Structures

Abstract:This paper presents a unifying framework for the form-finding and topology-finding of tensegrity structures. The novel computational framework is based on rank-constrained linear matrix inequalities. For form-finding, given the topology (i.e., member connectivities), the determination of the member force densities is formulated into a linear matrix inequality (LMI) problem with a constraint on the rank of the force density matrix. The positive semi-definiteness and rank deficiency condition of the force density matrix are well managed by the rank-constrained LMI-based formulation. A Newton-like algorithm is employed to solve the rank-constrained LMI problem. Two methods, named direct method and indirect method, are proposed to determine the nodal coordinates once the force densities have been obtained. For topology-finding, given the geometry (i.e., nodal coordinates), the determination of the topology is also formulated into an LMI problem with a constraint on the rank of the tangent stiffness matrix. Numerical examples demonstrate that different types of form-finding problems (such as tensegrity structures with single and with multiple self-stress states, symmetric and irregular tensegrity structures) can be uniformly and efficiently solved by the proposed approach. Furthermore, three well-known tensegrity structures are reproduced to verify the effectiveness of the proposed formulation on the topology-finding of tensegrity structures. (C) 2021 Elsevier Ltd. All rights reserved.
Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Xian Xu,Yafeng Wang,Yaozhi Luo,Di Hu

DOI: https://doi.org/10.1016/j.ijsolstr.2005.07.046

2018-01-01

Journal of Structural Engineering

Abstract:This paper proposes a general approach for topology optimization of tensegrity structures. The optimization problem is formulated in the framework of a mixed-integer linear programming. Compared with previous approaches, more practical issues such as member overlapping, strut buckling, displacement limits, and multiple load cases are considered in the proposed approach. The member connectivities, internal forces, and cross-sectional areas are used as independent variables. The total weight of the final structure is used as the objective function. The maximum allowed number of struts connected to each node, the maximum allowed number of cross-sectional sizes for each type of members, and the minimum number of nodes used in the final structure can be actively controlled. A novel constraint formulation is proposed to avoid the member overlapping problem. Numerical examples are carried out to verify the proposed approach. The tensegrity structures found by the proposed approach are much more suitable for practical applications, and the approach can be used as a general generator for new types of tensegrity structures for specific application scenarios.
The Equilibrium and Form-Finding of General Tensegrity Systems with Rigid Bodies

Shuo Ma,Muhao Chen,Zhangli Peng,Xingfei Yuan,Robert E. Skelton

DOI: https://doi.org/10.1016/j.engstruct.2022.114618

2022-01-01

Abstract:We develop a general approach to study the equilibrium and form-finding of any general tensegrity systems with rigid bodies. The equilibrium equations are derived in an explicit form in terms of a nodal coordinate and orientation parameter as the minimal coordinate. The nodal vector consists of nodes (either free or pinned) in the pure bar-string tensegrity network and nodes on the rigid bodies (those connected to the pure bar-string tensegrity network). Based on the Lagrangian method, the nonlinear statics of the general tensegrity system in terms of the minimal coordinate is first given. Then, we linearize the statics equation and obtain its equivalent form, in terms of the force vector of the compressive and tensile members, to analyze structure equilibrium configurations and prestress modes. To study the system's stability and have a comprehensive insight into the materials and structure members, we present the tangent stiffness matrix as a combination of the structure's prestress, material, and geometric information. It is also shown that without rigid bodies, the governing equations of the general tensegrity system yield to the classical tensegrity structure (pure string-bar network). Form-finding of general tensegrity is implemented based on solving the nonlinear equilibrium equation, where the modification of tangent stiffness matrix and line search algorithm is used. Numerical examples demonstrate the capability of our developed method in finding the feasible prestress modes, conducting form-finding and prestress designs, and checking the structural robustness of any tensegrity systems with rigid bodies.
Collision-Free Shape Control of A Plane Tensegrity Structure Using an Incremental Dynamic Relaxation Method and A Trial-And-Error Process

Xian Xu,Yaozhi Luo

DOI: https://doi.org/10.1177/0954410011433501

2012-01-01

Abstract:The application of tensegrity structures has been extended to deployable structures, smart structures, and robots. In these applications, large displacement shape control is usually involved. The problem of finding a collision-free path for the shape control emerges. In this article, a preliminary study on the collision-free shape control of tensegrity structures is carried out based on a representative two-dimensional tensegrity system. An incremental procedure based on dynamic relaxation method is proposed to track the trajectory of the movement during shape control. For every increment along the trajectory, collision is checked by a method based on geometrical analysis. The effect of the size of the obstacle to the number of feasible paths is investigated. It is found that when the size of the obstacle reaches a critical value, the structure is no longer able to move to the target configuration by a single step. As a result, a relay point is added in the free space. Via the relay point, free paths connecting the initial configuration and the target configuration are found.
A spatial constraint template problem

Shengli Liu,Min Tang,Jinxiang Dong

DOI: https://doi.org/10.1109/CSCWD.2002.1047677

2002-01-01

Abstract:Three-dimensional geometric constraint solving is a rapidly developing field, with applications in areas such as kinematics, molecular, modeling, surveying, and geometric theorem proving. While two-dimensional constraint solving has been studied extensively, there still remain many open questions in the arena of three-dimensional problems. We first introduce some techniques presented by (Hoffmann and Vermeer, 1995). The constraint system Hoffmann has studied consists of six geometric elements and pairwise constraints between triples of the elements. The core idea is to solve the geometric constraint template problems. Based on this, we continue to demonstrate how to solve a special template system composed of three points and three planes. This constraint system includes the angle constraints between two planes that are not discussed before.
Constraint problem solving based on geometric abstraction

Meng en Tan,Jinxiang Dong,Jianxin Ge,Zhijun He

1997-01-01

Ruan Jian Xue Bao/Journal of Software

Abstract:Constraint problem solving methods based on equations, usually have many disadvantages, such as computation complexities, constraint management difficulties. In this paper, a new method based on geometric abstraction is proposed. By the geometric representation of constraints and reasoning network, the authors can do geometric simplification and operations at high level. This method not only overcomes the disadvantages above, but also the feedback of under-constraint and over-constraint has more geometric meanings.
Complexity and Stop Conditions for NP as General Assignment Problems, the Travel Salesman Problem in $\mathbb{R}^2$, Knight Tour Problem and Boolean Satisfiability Problem

Carlos Barrón-Romero

DOI: https://doi.org/10.48550/arXiv.1610.03477

2016-03-08

Abstract:This paper presents stop conditions for solving General Assignment Problems (GAP), in particular for Travel Salesman Problem in an Euclidian 2D space the well known condition Jordan's simple curve and opposite condition for the Knight Tour Problem. The Jordan's simple curve condition means that a optimal trajectory must be simple curve, i.e., without crossing but for Knight Tour Problem we use the contrary, the feasible trajectory must have crossing in all cities of the tour. The paper presents the algorithms, examples and some results come from Concorde's Home page. Several problem are studied to depict their properties. A classical decision problem SAT is studied in detail.

Data Structures and Algorithms
Constraint maps and free boundaries

Alessio Figalli,André Guerra,Sunghan Kim,Henrik Shahgholian

2024-11-07

Abstract:In this short expository note, we present a selection of classic and recent ideas in free boundary theory, with a focus on the vectorial case, referred to here as constraint maps. The note includes a brief historical perspective and highlights the latest heuristic-level results.

Analysis of PDEs
Angular constraints on planar frameworks

Sean Dewar,Georg Grasegger,Anthony Nixon,Zvi Rosen,William Sims,Meera Sitharam,David Urizar

2024-03-24

Abstract:Consider a collection of points and the sets of slopes or directions of the lines between pairs of points. It is known that the algebraic matroid on this set of elements is the well studied 2-dimensional rigidity matroid. This article analyzes a construction on top of the set of slopes given by an angle constraint system of incidences and angles. In this setting we provide a matricial rigidity formulation of the problem for colored graphs, an algebro-geometric reformulation, precise necessary conditions and a combinatorial characterization of the generic behaviour for a special case.

Combinatorics,Metric Geometry
A Constructive Approach to Solving 3-D Geometric Constraint Systems Using Dependence Analysis

YT Li,SM Hu,JG Sun

DOI: https://doi.org/10.1016/s0010-4485(01)00054-9

2002-01-01

Abstract:Solving geometric constraint systems in 3-D is much more complicated than that in 2-D because the number of variables is larger and some of the results valid in 2-D cannot be extended for 3-D. In this paper, we propose a new DOF-based graph constructive method to geometric constraint systems solving that can efficiently handle well-, over- and under-constrained systems based on the dependence analysis. The basic idea is that the solutions of some geometric elements depend on some others because of the constraints between them. If some geometric elements depend on each other, they must be solved together. In our approach, we first identify all structurally redundant constraints, then we add some constraints to well constrain the system. And we prove that the order of a constraint system after processing under-constrained cases is not more than that of the original system multiplied by 5. After that, we apply a recursive searching process to identify all the clusters, which is shown to be capable of getting the minimum order-reduction result of a well-constrained system. We also briefly describe the constraint evaluation phase and show the implementation results of our method.
Relaxations and cutting planes for linear programs with complementarity constraints

Del Pia, Alberto,Linderoth, Jeff,Zhu, Haoran

DOI: https://doi.org/10.1007/s10898-024-01397-x

2024-04-19

Journal of Global Optimization

Abstract:We study relaxations for linear programs with complementarity constraints, especially instances whose complementary pairs of variables are not independent. Our formulation is based on identifying vertex covers of the conflict graph of the instance and contains the extended formulation obtained from the ERLT introduced by Nguyen, Richard, and Tawarmalani as a special case. We demonstrate how to obtain strong cutting planes for our formulation from both the stable set polytope and the boolean quadric polytope associated with a complete bipartite graph. Through an extensive computational study for three types of practical problems, we assess the performance of our proposed linear relaxation and new cutting-planes in terms of the optimality gap closed.

mathematics, applied,operations research & management science
Constraint selection in a build-up interior-point cutting-plane method for solving relaxations of the stable-set problem

Alexander Engau,Miguel F. Anjos,Immanuel Bomze

DOI: https://doi.org/10.1007/s00186-013-0431-z

2013-03-06

Mathematical Methods of Operations Research

Abstract:The stable-set problem is an NP-hard problem that arises in numerous areas such as social networking, electrical engineering, environmental forest planning, bioinformatics clustering and prediction, and computational chemistry. While some relaxations provide high-quality bounds, they result in very large and expensive conic optimization problems. We describe and test an integrated interior-point cutting-plane method that efficiently handles the large number of nonnegativity constraints in the popular doubly-nonnegative relaxation. This algorithm identifies relevant inequalities dynamically and selectively adds new constraints in a build-up fashion. We present computational results showing the significant benefits of this approach in comparison to a standard interior-point cutting-plane method.

mathematics, applied,operations research & management science
A Global Method for Relaxation for Multi-levelled Structured Deformations

Ana Cristina Barroso,José Matias,Elvira Zappale

2024-03-05

Abstract:We prove an integral representation result for a class of variational functionals appearing in the framework of hierarchical systems of structured deformations via a global method for relaxation. Some applications to specific relaxation problems are also provided.

Analysis of PDEs,Optimization and Control
Constrained Systems of Conservation Laws: A Geometric Theory

Moritz Reintjes

DOI: https://doi.org/10.48550/arXiv.1510.06677

2017-09-27

Abstract:We address the Riemann and Cauchy problems for systems of $n$ conservation laws in $m$ unknowns which are subject to $m-n$ constraints ($m\geq n$). Such constrained systems generalize systems of conservation laws in standard form to include various examples of conservation laws in Physics and Engineering beyond gas dynamics, e.g., multi-phase flow in porous media. We prove local well-posedness of the Riemann problem and global existence of the Cauchy problem for initial data with sufficiently small total variation, in one spatial dimension. The key to our existence theory is to generalize the $m\times n$ systems of constrained conservation laws to $n\times n$ systems of conservation laws with states taking values in an $n$-dimensional manifold and to extend Lax's theory for local existence as well as Glimm's random choice method to our geometric framework. Our resulting existence theory allows for the accumulation function to be non-invertible across hypersurfaces.

Mathematical Physics,Analysis of PDEs
Relative Well-Posedness of Constrained Systems Accompanied by Variational Calculus

Boris S. Mordukhovich,Pengcheng Wu,Xiaoqi Yang

2024-08-26

Abstract:The paper concerns foundations of sensitivity and stability analysis in optimization and related areas, being primarily addressed constrained systems. We consider general models, which are described by multifunctions between Banach spaces and concentrate on characterizing their well-posedness properties that revolve around Lipschitz stability and metric regularity relative to sets. Invoking tools of variational analysis and generalized differentiation, we introduce new robust notions of relative contingent coderivatives. The novel machinery of variational analysis leads us to establishing complete characterizations of the relative well-posedness properties and developing basic rules of variational calculus interrelated with the obtained characterizations of well-posedness. Most of the our results valid in general infinite-dimensional settings are also new in finite dimensions.

Optimization and Control
An Approach Based on Deformation Mapping for Constraint Graph Direction and Solution

Jian-guo JIN,Jian-rong TAN

DOI: https://doi.org/10.13328/j.cnki.jos.2000.07.009

2000-01-01

Ruan Jian Xue Bao/Journal of Software

Abstract:The concepts of deformation mapping and deformation origin are described. A new approach for directing and solving constraint graph is presented, which is deformation mapping based and two-dimension engineering drawing oriented. A directive method for constraint graph, which is based on deformation mapping, is also proposed. Finally, a new approach for solving the deformation constraint graph is given, which is based on compound node and virtual constraint. With this method, the reliability to direct the constraint graph is increased, the computation complexity is reduced, and the cyclic constraint graph can be solved expediently.
An Analysis of Constraint-Relaxation in PDE-Based Inverse Problems

Tristan van Leeuwen,Yunan Yang

2024-11-30

Abstract:Inverse problems are ubiquitous in science and engineering. Many of these are naturally formulated as a PDE-constrained optimization problem. These non-linear, large-scale, constrained optimization problems know many challenges, of which the inherent non-linearity of the problem is an important one. In this paper, we focus on a relaxed formulation of the PDE-constrained optimization problem and provide an in-depth analysis of it. Starting from an infinite-dimensional formulation of the inverse problem with discrete data, we propose a general framework for the analysis and discretisation of such problems. The relaxed formulation of the PDE-constrained optimization problem is shown to reduce to a weighted non-linear least-squares problem. The weight matrix turns out to be the Gram matrix of solutions of the PDE and, in some cases, can be estimated directly from the measurements. The latter observation points to a potential way to unify recently proposed data-driven reduced-order models for inverse problems with PDE-constrained optimization. We provide a number of representative case studies and numerical examples to illustrate our findings.

Optimization and Control,Analysis of PDEs

Relaxation and 3d-2d passage with determinant type constraints: an outline

Form-Finding of Tensegrity Structures with Boundary Constraints Using Parallel Computation of Singular Value Decomposition

Recent advances in configurations in spatial structures

A Unifying Framework for Form-Finding and Topology-Finding of Tensegrity Structures

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

The Equilibrium and Form-Finding of General Tensegrity Systems with Rigid Bodies

Collision-Free Shape Control of A Plane Tensegrity Structure Using an Incremental Dynamic Relaxation Method and A Trial-And-Error Process

A spatial constraint template problem

Constraint problem solving based on geometric abstraction

Complexity and Stop Conditions for NP as General Assignment Problems, the Travel Salesman Problem in $\mathbb{R}^2$, Knight Tour Problem and Boolean Satisfiability Problem

Constraint maps and free boundaries

Angular constraints on planar frameworks

A Constructive Approach to Solving 3-D Geometric Constraint Systems Using Dependence Analysis

Relaxations and cutting planes for linear programs with complementarity constraints

Constraint selection in a build-up interior-point cutting-plane method for solving relaxations of the stable-set problem

A Global Method for Relaxation for Multi-levelled Structured Deformations

Constrained Systems of Conservation Laws: A Geometric Theory

Relative Well-Posedness of Constrained Systems Accompanied by Variational Calculus

An Approach Based on Deformation Mapping for Constraint Graph Direction and Solution

An Analysis of Constraint-Relaxation in PDE-Based Inverse Problems