Abstract:Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yielding and buckling) has been intensively studied. However, all the existing studies focus on passive tensegrity structures, i.e., the structural members cannot change their lengths actively and the structure has to passively resist external loads. An active tensegrity structure equipped with actuators can actively adapt its internal forces and nodal positions and thus can actively resist external loads. Therefore, it is expected that active tensegrity structures use less material compared to passive tensegrity structures thus leading to a smaller mass. Due to the integration of the active control system, the design of active tensegrity structures is different from passive tensegrity structures. This study proposes a general approach for the design of minimal mass active tensegrity structures based on a mixed integer programming scheme, in which the member crosssectional areas, prestress, actuator layout and control strategies (i.e., actuator length changes) are designed simultaneously. The member cross-sectional areas, prestress level, and actuator control strategies are treated as continuous variables and the actuator layout is treated as a binary variable. The equilibrium condition, member yielding, cable slackness, strut buckling, and the limitations on the nodal displacements as well as other practical requirements are formulated as constraints. Three typical active tensegrity structures are designed through the proposed approach and the results are benchmarked with the equivalent minimal mass passive designs. It is illustrated that the active designs can significantly decrease the material consumption compared with the equivalent passive designs thus leading to more lightweight tensegrity structures.

Collision-Free Shape Control of A Plane Tensegrity Structure Using an Incremental Dynamic Relaxation Method and A Trial-And-Error Process

Collision-free path planning of tensegrity structures

Strength optimization analysis of tensegrity structure by shape adjustments under restricted displacements

Optimal displacement control of tensegrity structures based on linear programming

Research on simultaneous control of force and shape for adaptive cable-strut tensile structures

Shape optimization analysis of tensegrity structure

Nonlinear active control of tensegrity structures

Multi-Stable Tensegrity Structures

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Automatic construction of tensegrity structures with complex surfaces based on circle packing

Minimal Mass Design of Active Tensegrity Structures

An improved multi-objective topology optimization approach for tensegrity structures:

A General Model for Both Shape Control and Locomotion Control of Tensegrity Systems

Automatic Assembly of Tensegrity Chain Structures along Axes Based on NURBS Curves

Tensegrity Form-Finding Using Finite Particle Method

Reconfiguration of Multi-Stage Tensegrity Structures Using Infinitesimal Mechanisms

Planar Formation Control Using Tensegrity Structures and Experiments

Design and Control of a Collision-Resilient Aerial Vehicle With an Icosahedron Tensegrity Structure

Tensegrity Models and Shape Control of Vehicle Formations