Abstract:Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yielding and buckling) has been intensively studied. However, all the existing studies focus on passive tensegrity structures, i.e., the structural members cannot change their lengths actively and the structure has to passively resist external loads. An active tensegrity structure equipped with actuators can actively adapt its internal forces and nodal positions and thus can actively resist external loads. Therefore, it is expected that active tensegrity structures use less material compared to passive tensegrity structures thus leading to a smaller mass. Due to the integration of the active control system, the design of active tensegrity structures is different from passive tensegrity structures. This study proposes a general approach for the design of minimal mass active tensegrity structures based on a mixed integer programming scheme, in which the member crosssectional areas, prestress, actuator layout and control strategies (i.e., actuator length changes) are designed simultaneously. The member cross-sectional areas, prestress level, and actuator control strategies are treated as continuous variables and the actuator layout is treated as a binary variable. The equilibrium condition, member yielding, cable slackness, strut buckling, and the limitations on the nodal displacements as well as other practical requirements are formulated as constraints. Three typical active tensegrity structures are designed through the proposed approach and the results are benchmarked with the equivalent minimal mass passive designs. It is illustrated that the active designs can significantly decrease the material consumption compared with the equivalent passive designs thus leading to more lightweight tensegrity structures.

Nonlinear active control of tensegrity structures

Shape optimization analysis of tensegrity structure

Strength optimization analysis of tensegrity structure by shape adjustments under restricted displacements

DYNAMIC CONTROL OF TENSION STRUCTURES

Optimal displacement control of tensegrity structures based on linear programming

Research on simultaneous control of force and shape for adaptive cable-strut tensile structures

Collision-Free Shape Control of A Plane Tensegrity Structure Using an Incremental Dynamic Relaxation Method and A Trial-And-Error Process

Multi-Stable Tensegrity Structures

Form-finding of Tensegrity Structures Based on the Levenberg-Marquardt Method

Minimal Mass Design of Active Tensegrity Structures

Active Control on Coupled Bending-Torsion Vibration of Two-Link Space Flexible Component

An improved multi-objective topology optimization approach for tensegrity structures:

Finding Member Connectivities and Nodal Positions of Tensegrity Structures Based on Force Density Method and Mixed Integer Nonlinear Programming

Non-linear joint dynamics and controls of jointed flexible structures with active and viscoelastic joint actuators

The Equilibrium and Form-Finding of General Tensegrity Systems with Rigid Bodies

Active Vibration Control of Flexible Structures with Super-Coiled Actuators

An Improved Dog-Leg Method for Form-Finding of Tensegrity Structures

Numerical Modeling of Force-Stiffness Response of Cross-Linked Actin Networks Using Tensegrity Systems

Adaptive control to prevent transfer between bistable configurations of a tensegrity

Non-linear stochastic optimal control for coupled-structures system of multi-degree-of-freedom

A unified approach to dynamic analysis of tensegrity structures with arbitrary rigid bodies and rigid bars