Abstract:Laser cladding is an established coating technology which is established as emerging technology for repair applications and for the fabrication of near net shape geometries. Within the scope of coating, repair and additive manufacturing applications single weld tracks are generated on a metal substrate by a laser beam and simultaneously injected metal powder. For coating applications, such as wear-resistant coatings, single weld tracks are positioned next to each other in order to form a continuous surface layer. Coatings against heavy abrasive wear often contain additional particles like tungsten carbide or diamond particles. However, by embedding wear-resistant particles like tungsten or diamond particles, varying applications can be addressed. For example, the cutting ability of industrial tools can be enhanced by embedding diamonds into a coating. In this paper, a novel approach, the direct embedding of diamonds without using a metal matrix during laser cladding is experimentally investigated. As diamonds are susceptible to heat, varying strategies for thermal energy input in the first place different laser modes of operations (continuous wave and pulsed) are investigated for direct diamond laser cladding. Major objectives of the presented research work are homogeneous diamond distribution on the surface of the sheet metal samples, low number of metal covered diamonds, and minor thermal damage to the embedded diamonds. Based on metallographic analyses, the generated samples are evaluated with respect to the previously stated objectives. During direct diamond laser cladding different phenomena like increasing width of a single weld track during one transit and varying penetration depths can be observed. In order to understand and explain these phenomena, a high speed camera is used for process monitoring. For the detection of these process irregularities, cross sections and the data gathered via process monitoring are analyzed. The results which are presented in this paper allow conclusions to be drawn about the laser diamond interaction mechanisms and about processing parameters for embedding diamonds without a metal matrix.

Using a Laser Plasmatron to Synthesize Diamond Coatings on a Carbide Cutting Tool

Formation of Diamond-Like Carbon Coatings by Chemical Deposition in High Density Plasma

Deposition of nano-diamond-like carbon films by an atmospheric pressure plasma gun and diagnostic by optical emission spectrum on the process

Gas-jet MPCVD synthesis of diamond coatings on substrates of various materials

Uniform diamond coatings on WC-Co hard alloy cutting inserts deposited by a microwave plasma CVD

Group growth of polycrystalline diamond coating by MPCVD technique on a hard alloy tool with a thin blade

Application of Raman Spectroscopy for Analyzing Diamond Coatings on a Hard Alloy

Diamond-Like Carbon Thin-Film Deposition Using A Magnetically Confined Rf Pecvd System

Diamond-like Carbon Thin Films Prepared by ECR Argon Plasma Assisted Pulsed Laser Deposition

Molecular dynamics simulation of laser-induced graphitization of CVD diamond

Enhancement of the properties of pulsed laser-deposited carbon nitride by the synchronisation of laser and N2 gas jet pulses

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

Optical and Electrical Properties of Diamond-like-Carbon Coatings Prepared by Electron Cyclotron Resonance Ion Beam Deposition Process

Spectroscopic Study on the Evolution of Graphite Ablation Plume in ECR Argon Plasma During the Deposition of Diamond-Like Carbon Films

Effect of W-coated Diamond on the Microstructure and Thermal Conductivity of Diamond/w Matrix Composites for Plasma-Facing Materials (Pfms)

Synthesis and characterization of diamond-like carbon coatings for drill bits using plasma-enhanced chemical vapor deposition

GAS-JET SYNTHESIS OF DIAMOND COATINGS ON SILICON SUBSTRATES FROM AN H2 + CH4 + Ar MIXTURE ACTIVATED IN A MICROWAVE DISCHARGE

Experimental investigation of direct diamond laser cladding in combination with high speed camera based process monitoring

Multilayer Diamond‐Like Carbon Films on Monocrystalline Diamond

Laser Processing of Coarse Grain Polycrystalline Diamond (PCD) Cutting Tool Inserts using Picosecond Laser Pulses

Structure of the Coatings Onto Ceramic Cutting Tools Deposited by Pulsed High Energy Density Plasma