Abstract:High-entropy carbides are a nascent group of ceramics that are promising for high-temperature applications due to the combination of good stability, high hardness (H), high strength, and superior creep resistance that they display. Due to high melting points and low lattice diffusion coefficients, however, the high-entropy carbides are usually difficult to consolidate to a nearly full density. To cope with this challenge, herein, binary carbides including TiC, V8C7, NbC, Mo2C, and WC with different carbon stoichiometry were used to prepare dense high-entropy (TiVNbMoW)C-4.375, and the influence of carbon vacancy on formation ability and mechanical properties of carbon-deficient high-entropy (TiVNbMoW)C-4.375 were investigated. Intriguingly, although the starting binary carbides have different crystal structures and carbon stoichiometry, the as-prepared high-entropy material showed a rock-salt structure with a relatively high density (98.1%) and good mechanical properties with hardness of 19.4 +/- 0.4 GPa and fracture toughness (K-IC) of 4.02 MPa center dot m(1/2). More importantly, the high-entropy (TiVNbMoW)C4.375 exhibited low coefficient of friction (COF) at room temperature (RT) and 800 degrees C. Wear rate (W) gradually increased with the temperature rising, which were attributed to the formation of low-hardness oxidation films at high temperatures to aggravate wear. At 800 degrees C, lubricating films formed from sufficient oxidation products of V2O5 and MoO3 effectively improved tribological behavior of the high-entropy (TiVNbMoW)C-4.375. Wear mechanisms were mainly abrasive wear resulting from grain pullout and brittle fracture as well as oxidation wear generated from high-temperature reactions. These results are useful as valuable guidance and reference to the synthesis of high-entropy ceramics (HECs) for sliding parts under high-temperature serving conditions.

Surface energies in high‐entropy carbides with variable carbon stoichiometry

Role of carbon vacancies in determining the structural, mechanical, and thermodynamic properties of (HfTaZrNb)C1-x high entropy carbides: a first-principles study

Entropy Landscaping of High-Entropy Carbides

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

Local orders, lattice distortions, and electronic structure dominated mechanical properties of (ZrHfTaM1M2)C (M = Nb, Ti, V)

From stoichiometric to non-stoichiometric high-entropy carbide: a case study of hafnium addition

Machine learning of carbon vacancy formation energy in high-entropy carbides

Fermi Level Engineering and Mechanical Properties of High Entropy Carbides

Unraveling Lattice-Distortion Hardening Mechanisms in High-Entropy Carbides.

Lattice distortion in high‐entropy carbide ceramics from first‐principles calculations

Synthesis and Mechanical and Elevated Temperature Tribological Properties of a Novel High-Entropy (tivnbmow)c 4.375 with Carbon Stoichiometry Deviation

Structural and Electronic Properties of Cobalt Carbide Co 2 C and Its Surface Stability : Density Functional Theory Study

Mechanical properties and high-pressure behavior of high entropy carbide (Mo, Nb, Ta, V, W)C

First-principle study on physical properties and vacancy formation of face-centered cubic Co-Ni-Cu-Mo-W high entropy alloys

Carbon-deficient High-Entropy (zr0.17nb0.2ta0.2mo0.2w 0.2)C0.89: A Potential High Temperature and Vacuum Wear-Resistant Material

Frist-principles prediction of elastic, electronic, and thermodynamic properties of high entropy carbide ceramic (TiZrNbTa)C

Anisotropy Analysis of the Surface Energy of Hcp (c/a<1.633) Metals

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Stability and mechanical properties of single-phase quinary high-entropy metal carbides: First-principles theory and thermodynamics

Orientation And Composition Dependences Of The Surface Energy And Work Function Observed By First-Principles Calculation For The Mo-Hf System

Optimized Design of Quinary High-Entropy Transition Metal Carbide Ceramics Based on First Principles