Abstract:Solidification conditions and cooling rate can significantly affect the microstructure and the mechanical properties of Nickel-based superalloy GH4169 components repaired by laser direct energy deposition (L-DED). In this work, we employ inter-channel dwell time in the l-DED repairment of GH4169 superalloy groove in order to control the thermal cycles during deposition, thus regulating the microstructure and tensile properties of repaired GH4169 groove. The tensile properties of materials repaired by using different inter-channel dwell times were compared by tensile tests with digital image correlation (DIC) technique, and the microstructure and fracture mechanism were also investigated by scanning electron microscope (SEM). Results show that the dendrite structure, grain size of recrystallization, primary dendrite arm spacing, distribution of Laves and γ'' phases of the repaired material are significantly different under different inter-channel dwell times of 0 s, 4 s, 8 s and the associated different thermal cycles. The content of the Laves phases is lower, the grain size is smaller and distribution of γ'' phases are relatively uniform with the additional dwell time of 8 s. Owing to the difference in microstructure, the tensile strengths of both the repaired material and the substrate material increase with the increase of inter-channel dwell time. Moreover, the repaired GH4169 materials exhibit similar or even higher tensile strength than that of the substrate GH4169 material. Besides, due to the uneven precipitation of Nb element in repaired material and the associated change of Laves phases and carbides, the measured elongations of the substrate are larger than those of the repaired materials. The changes in microstructure under varying dwell times also lead to differences in strain localization and strain hardening exponent of the repaired materials. The present study paved a novel way to achieve high-quality repair of superalloys via laser direct energy deposition.

Crack initiation and propagation within nickel-based high-temperature alloys during laser-based directed energy deposition: A review

Investigation of the Influence of Process Parameters on Crack Formation and Mechanisms in Ti-48Al-2Cr-2Nb Alloy via Laser Directed Energy Deposition

Hot cracking behavior and mechanism of a third-generation Ni-based single-crystal superalloy during directed energy deposition

Discovering the Crack Formation Criteria for Rene 80 Superalloys in Laser Blown Directed Energy Deposition

Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties

A review on cracking mechanism and suppression strategy of nickel-based superalloys during laser cladding

Laser Preheating for Hot Crack Reduction in Direct Metal Deposition of Inconel 738LC

Mechanisms and influencing factors of defect formations during laser-based directed energy deposition with coaxial powder feeding: a review

Cracking mechanism of Hastelloy X superalloy during directed energy deposition additive manufacturing

The mechanism and regulation of hot cracking in a new complex-concentrated alloy by a novel integrated directed energy deposition

Laser-based directed energy deposition of Monel K-500 and Stellite 6 multi-materials

Selective crack propagation in steel-nickel component printed by wire arc directed energy deposition

Direct Laser Deposition of Inconel 738 on Directionally Solidified Ni-base Superalloy Component

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

Effect of closed-loop controlled melt pool width on microstructure and tensile property for Fe-Ni-Cr alloy in directed energy deposition

Statistical Study of Ductility-Dip Cracking Induced Plastic Deformation in Polycrystalline Laser 3d Printed Ni-Based Superalloy

A novel method to prevent cracking in directed energy deposition of Inconel 738 by in-situ doping Inconel 718

Hot Crack Formation Mechanism and Inhibition of a Novel Cobalt-Based Alloy Coating during Laser Cladding

Influence of processing parameters on the thermal history, microstructure and tensile properties of Inconel 738 produced by laser directed energy deposition

Influences of Cooling Conditions on the Liquation Cracking in Laser Metal Deposition of a Directionally Solidified Superalloy

Dynamic evolution behavior of cracks for single-track and multi-track clads in laser cladding